Used International B414 Super for sale (13,413)

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, bale weight: 273 kg, machine/vehicle number: X0721-016, GPS GREAT SCRAP PROCESSING SOLUTIONS BALER Fully automatic two compression baler for production of high-density bales. This baler will produce a very high-density bale and is suited for both ferrous and non-ferrous scrap. Fgjbowc U Axevdidceb 2021 G.P.S. Great Scrap Processing Solutions Model: 80 2C XL Automatic Baler, 400-480V, 3-PH, Total Install Power: 110 kW, Working Pressure: 280 Bar, First Compression Cylinder (Thrust): 140 t, Side Cylinder (Thrust): 140 t, Machine Noise Level:

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Fjbvjrualpedidcjgb Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, Year of construction: 2013, #3101 Complete Brewer Scragg Mill With Slab Recovery, Gang Saw & Stackers Fgjbowbu Dyevdidcob 20' 4-Strand Log Decks | Golden Eagle Slasher Saw | 2) Golden Eagle Deluxe Cabs | Primary Single Arbor Scragg Saw | Secondary Single Arbor Scragg Saw | 2) Golden Eagle Slab Edger Saw | 310-U 3 Head Under Saw | 2000 5 Head Band Saw | Side Winder Board Deduster | Super Golden Eagle 3 Head Splitter Band Saw | 4 Head Under Cut Cant Trim Saw | BR-9920 Double Arbor, 20" Bay Gang Saw System | AIT TS300 Stacker | 2) M2L Stackers | BR-4004C Double Head Notcher | Golden Eagle Chamfer | Complete Conveyors, Infeed, Rollers and outfeeds for all machines. Complete system 2013. Have videos and more pictures upon request. Price is negotiable

Condition: used, Functionality: fully functional, Year of construction: 1972, machine/vehicle number: 619336-KL, load capacity: 14,400 kg, cutting length (max.): 1,150 mm, alignment: Sí, alineado y freno independiente por eje/flecha, paper weight (max.): 900 g/m², paper width (max.): 1,850 mm, number of blades: 3, number of shafts: 12, Equipment: tail-lift, Price to be negotiated, schedule a visit without obligation. HAM-LET Brand Cutting Machine Model 1972 Incorporates a head with blades up to 73" wide to make cuts with adjustable length by means of a gear system and a variable diameter pulley. Includes 4 gears to adjust the measurement from 30cm to 115cm in length. Includes 3 circular blades with a base for additional cross cuts (variable width). The cutting capacity is ~80 cuts/min, it is capable of cutting sheets with a total thickness of 900 grs/m2. The speed of the head is adjustable, to adapt to different production rates. Includes a sheet counter (cut counter). Reinforced Beam Structure Made of high-strength beam/joist (not PTR), capable of mounting up to 12 arrows (axles or bars) for paper rolls with a total weight of 14.4ton. Each arrow has independent brakes and manual alignment, guaranteeing precise unwinding and safe. Conveyor Belt System Composed of adjustable speed belts that lead the cut paper to the elevator, in the stacking area. With alignment mechanism. Elevator with 1 ton capacity Receives and stacks the cut sheets in an orderly manner, with a mechanical aligner. Status and Availability Currently in operation and in perfect working condition. 90% of its components are original or renewed with equivalent or superior parts; 10% corresponds to adaptations that improve performance. Constant maintenance, ready to be installed in the production line. Complete Set for Sale Fsbvev Ihiqodidcegb Includes the cutting machine, beam structure, belt system, elevator and sheet counter. Ideal for printing, cardboard and paper cutting in general (bond paper, newspaper, kraft, caple, etc.). SECTION SPECIFICATIONS Cutting Machine Brand and Year Brand and Year - HAM-LET Model 1972 - Serial No.: 619336-KL Feed and Cutting Rolls - Head for up to 73" blade - 3 Blades 73" long × 2" thick, cobalt tipped (rippling) - Rubber Roller: 75" long, with pressure/gap adjustment from cast iron roller - Cast iron roller (New): 75" long - Protective frame to prevent contact with gears, belts and pulleys) Cross Cut - Holder for 3 circular blades (includes 3 bases for mounting) Cutting Length Adjustment - Gear drive to modify the rotation ratio of the Roller with blade - 4 gears included for measurements: ~35cm, ~55cm, ~65cm, ~85cm - Belt system with variable diameter pulley (with “claws”) for precise adjustment of the cutting measurement ±20cm Motor and Controls - 15 HP three-phase motor, up to 1750RPM (semi-new) - Adjustable speed by knob (next to the elevator) - Control panel with power button, emergency stop button - Sheet or cut counter (display next to the elevator) Construction - Cast iron frame, modular and disassemblable design

Condition: new, Year of construction: 2024, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Fsbvdidsg Tu N Aocogb Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Control: DECKEL DIALOG 4 Fgobvowhwhbodidcsb Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw 380V - 3 PHASE Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Condition: used, mileage: 271,000 km, Year of construction: 2020, Field of application: Freight transport Serial number: WV3ZZZSZZL9046938 Please contact ATS Norway AS for more information Please provide reference number upon request: 19978 Specifications: - Km: Approx. 271,000 - Transmission: Automatic - Euro 6, 177 hp - Okay tires - 4x2 - 2 x side doors - Zepro lift, 750 kg - 3 seats - 8 pallets - Internal length: Approx. 4.38 m - Internal width: Approx. 2.1 m - Internal height: Approx. 2.09 m - Radio/CD - Air conditioning/AC - Ready for delivery - Videos Description: 2020 Volkswagen Crafter with 8 pallet box truck. The left rear wheel bearing, front brake pads, rear brake discs and pads have been replaced.++ Ready for delivery Km: 271000 HK: 177 Technical approved: Yes EU-approved until: 02.09.2026 Own weight: 2740 Febvov U R Ntodidcsgb Total Weight: 3500 Payload: 685 Width: 220 Length: 710 Euro: 6 Gearbox: Automatic

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: Fsbvsrtrvyodidcjgb -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Year of construction: 1997, Condition: used, Used Comi Condor type HX/GMP 316L stainless steel Atex rated horizontal peeler centrifuge. Unit has 1150mm diameter perforated basket. Maximum load 280kgs, maximum cake capacity 222 litre. Internal rated +0.5/-0.5 bar design pressure at 50 deg.c. Unit has main drive, hydraulic powerpack, mounting springs and (2) control cabinets. Fgebvdidjiwyr Asceb Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Field of application: Internal logistics Serial number: B3A2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19880 Specifications: - 5395 Hours - 4500 kg - Lifting capacity of 3000 kg - Repair item - Ready for delivery Fobvdisv U Staedcogb Description: We have a Hyster H60F Gas truck Repair item for sale. The forklift is a Repair item as it is hanging on the clutch. Apart from this, it works as it should. But some additional costs must be considered. Ready for delivery

Condition: used, Year of construction: 2015, machine/vehicle number: 25600, rotational speed (min.): 30 rpm, grinding wheel speed: 17,000 rpm, grinding wheel diameter: 300 mm, overall weight: 29,000 kg, grinding wheel width: 60 mm, table diameter: 930 mm, Equipped with: Siemens Sinumerik 840D Control Extended 1500 mm Gear Diameter Extended Working Stroke (Y Axis) 1500 mm CNC Dresser Prepped for Internal Grinding BfG Best-Fit Grinding Software High Speed Grinding Steady Rest Onboard Inspection (Profile, Lead, Spacing) Upgraded Inspection for Scanning/Digital Measurement Hydraulic Clamping System Profile & Lead Modifications Double-Helical Grinding Grind from Solid Root Grinding Hydraulic Unit Lubrication System Chiller Specifications: Operating Range: -Maximum Gear Outside Diameter: 1,500 mm -Maximum Stroke Length: 1,500 mm -Maximum Stroke Length of Tailstock: 1,500 mm -Minimum/Maximum Center Distance Above Table: 500 - 2,000 mm -Minimum Module: 0.5 -Maximum Pivoting Angle: -45 / +120 Degrees -Maximum Grinding Spindle Drive Power: 38.5 kW Fgsbvdsvggwwsidcob -Maximum Grinding Wheel Outside Diameter: 300 mm -Maximum Grinding Wheel Width: 60 -Maximum Stroke Speed: 12,000 mm/min -Minimum/Maximum Workpiece Table Speed: 0 - 30 RPM -Maximum Workpiece Table Load: 8,000 kg -Workpiece Table Diameter: 930 mm -Total Weight, Approximate: 29,000 kg -Space Requirement (width x depth x height): 5,2 x 6,9 x 3.6 m

Condition: used, Used Matcon approximately 1,000 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 500mm deep with a 500mm deep conical bottom. Unit mounted on forkliftable base. Includes internal discharge cone. Fjbeun Syvevdidcogb

Condition: used, Year of construction: 2018, Serial number: YF1S3HWL2HF03xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19763 Specifications: - 2018 model - 3 axles - Lift on 1 axle - Full side opening - Tires (see pictures) - Internal width: 2,490 m - Internal height: 2,849 m - Internal length: 13.439 m - Ready for delivery Description: Narko 3-axle semi-trailer that can be put straight to work. Some errors and shortcomings may occur as the trailer is from 2018. Ready for delivery Technical approved: Yes Febvdijv U Tdgedcogb EU-approved until: 30.06.2025 Own weight: 8990 Total Weight: 42000 Payload: 33010 Width: 260 Length: 1380

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Fgebvdidjrtryyecjb Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: like new (used), Year of construction: 2000, Used Kemutec Kek model 200 EC Stainless Steel Jacketed Ribbon/T-Arm Mixer. Has approximately 200 litre working capacity and 215 litre total capacity. Mixing trough approximately 565mm diameter X 860mm long. Has hinged lid and end cover. Internal rated atmospheric pressure at 50 degC. Cantilever design with bolted double ribbon mixing blade belt driven by 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 reduction ratio at approximately 53 rpm. Includes spare double ribbon and t-arm mixing blades. Has provision for chopper but none fitted. Includes centre bottom discharge with valve. Has stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. Mounted on mobile base. Fjbsiwytcjvdidcjgb Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. Fgsbjrtrzdsvdidceb The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. Fgobetz Thbjvdidcob External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs.

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Fgebvdidortrxiscsb Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Used Stainless Process Systems approximately 50 litre (13 US Gallon) stainless steel vertical reactor. Unit measures approximately 500mm diameter x 300mm straight side. Unit has welded dished bottom and clamped dished top head. Internal originally rated 75psi (5.17bar) maximum allowable working pressure at -20 to 350 deg.f. (-28 to 176 deg.c.) Unit re-rated in 2015 to 100psi (6.89bar) maximum allowable working pressure at 350 deg.f. (176 deg.c.). External stainless steel jacket rated 90psi (6.20 bar) / full vacuum maximum allowable working pressure at 350 deg.f. (176 deg.c.). Unit has bottom entry Steridose magnetic coupled agitator driven by Baldor 0.37hp, 1730rpm electric motor. Unit includes local control panel. Mounted on mobile stainless steel trolley. Fobvdjun S Hpsidcjgb

Condition: used, Used Bibby approximately 3,00 litre 316 stainless steel vertical mixing vessel. Unit measures approximately 1,980mm tan to tan x 1,400mm diameter. Unit has welded dished top and bottom heads. Internal rated 3.61 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-set 2-tier, 3-blade agitator with Lightnin model LS150 drive. Unit is mounted on side supports. Fgebvsun Sw Iedidcsb

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Fgebvdisun Sxrsdcsb

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. Fgjbstz Tgqevdidceb External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs.

Condition: like new (used), Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Fsbvdisgfb Rgsdcjgb Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 4 kw 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Unit requires a mechanical seal and backing plate. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: refurbished (used), Used Refurbished Giusti model Pharmix 120 litre capacity 316 stainless steel jacketed process vessel. Internal approximately 510mm diameter X 585mm straight side. Has clamped dished top and welded dished bottom heads. Internal rated full vacuum/1.38 bar working pressure. Fobvdidegcb A Eocjgb Has 321 stainless steel external jacket rated 3.45 bar working pressure. Vertical agitator with PTFE wall scraper blades direct driven by 1.1 kW, 415 volt, 3/50, 1420 rpm motor via Supaflex enclosed VS drive rated 600-3000 rpm motor and Electro power gears type ESRV2 gearbox rated 34.1 reduction ratio. Bottom entry homogeniser direct driven by a pole changing 2 speed 3.7/4.4 kW, 400 volt, 3/50, 1425/2890 rpm motor. Mounted in stand with hand hydraulic lift for raise and lower of top dished head. Has approximately 38mm (1.5") centre bottom discharge with valve. Designed for producing liquids, creams and semi solids under sterile conditions. This unit has recently been refurbished and is immediately available for sale. Here at Perry Process Equipment Ltd our engineering workshop aids us in being a premium supplier of high quality used process equipment. We can carry out a range of services from basic equipment testing right up to mechanical refurbishment, for a broad range of industries. Contact us for further details about the refurbishment work carried out on this unit and to request a free no-obligation quotation. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Sinclair Stainless Fabrications approximately 15,000 litre 316 stainless steel vertical reactor. Fjbsgwbbfovdidcsgb Unit measures approximately 2,300mm diameter x 3,540mm straight side. Has welded dished top and bottom heads. Internal rated 3.6 bar/full vacuum design pressure at 165 deg.c. Has external stainless steel limpet coil jacket rated 5.5 bar design pressure at 165 deg.c. Unit has top mounted stainless steel agitator with 2-tier 4-blade turbine blades. Driven by 45kw motor/gearbox with new double mechanical seal. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.