Used Belflex Bf180 Sm for sale (27,667)

Condition: good (used), Festo maintenance unit compressed air preparation Air Pneumatics Cob Exktou Rqmzj Iogt

Condition: used, Year of construction: 2004, Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Technical details Capacity: 6,000 bph Labeling stations: 2 cold glue 1 self adhesive Csb Exev Df I Njkt Iogt

Condition: used, Year of construction: 2006, Functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, pressure: 6 bar, nominal heat output: 1,400 kW (1,903.47 HP), temperature: 105 °C, tank capacity: 2,040 l, fuel: domestic gas H, frequency: 50 Hz, Equipment: type plate available, Viessmann VITOPLEX SX1 1400kw hot water boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of construction: 2006 Nominal heat output: 1400 kW Boiler water content: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% Maximum water temperature in the heating circuit: 105°C Nominal voltage: 230V 50Hz 6A Boiler control: Vitotronic 100 Fireplace pipe diameter: 300 mm Dimensions: Length: 2540 mm Width: 1380-1840 mm Height: 1900 mm Weight: approx. 2500 kg Gas burner: Weishaupt G30/2A complete assembly. Version: ZM-LN Year of construction: 2007 Heat output: min. 300 - max. 1800 kW Connection pressure: min. 15- max. 500 Mbar Gas type: natural gas Gas control valve: DUNGS DMV-D 5065/11 Pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 Stellar Drive Leakage tester Dungs VPS-504 S04 with stuffing box Leak tester Dungs VPS-504 S04 Csb Eoudllvsxkt Isgt Electric power: 6 kW Control voltage: 230 V 50 Hz 1 Phase Mains voltage: 400 V, 50 Hz, 3 Phase

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Cobohw Emqe Exkt Iogt Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Viessmann / KÖB Pyrot 220 kW wood chip boiler for sale – high performance, reliable technology! 🔥 A solidly built, industrial-grade Viessmann / KÖB Pyrot 220 kW biomass boiler is for sale, which is an excellent choice for factories, heating plants, agricultural facilities or institutions. ⸻ Main features: 🌲 Fuel: wood chips, pellets, biomass ⚡ Power: 220 kW – continuous, designed for heavy use 🔁 Automatic dosing, combustion control 🧠 Advanced control, safe and stable operation ♻️ Excellent efficiency, low emissions 🇦🇹 KÖB – Austrian development, Viessmann guarantee of quality 💥💰 PRICE: 4,000 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ Cob Exewahnvekt Iogt 💼 Top Heating Systems – ProfiKazán Industrial biomass boilers – from a reliable source, with expertise.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 41 h, machine/vehicle number: 460001238, Almost new (working time only 41 hours) combined crusher-press for PET bottles and cardboard. Effective system for recycling PET bottles in one Csb Exktov T U E Ao Iogt рабочем цикле, мужчины обмы скалируемых ПЕТ-бутылок до 90%, turning them into compact bales up to 100kg.

Condition: refurbished (used), Year of construction: 2009, machine/vehicle number: 111A030921006, warranty duration: 12 months, frame height: 400 mm, frame width: 500 mm, Equipment: documentation/manual, Mature technology With the SM1 series, which was also marketed under the name AMPAG Sprint, the German manufacturer Schwede Maschinebau GmbH has created a real long-running success that is still in use thousands of times today. Whether in print stores, lettershops or in warehouses and logistics, this all-rounder enjoys great popularity in a wide range of industries thanks to its low-wear and low-maintenance technology. Our model is also equipped with a second foot pedal on the back as well as a table top sensor for automatic triggering of the strapping process. The device from 2009 was already equipped by SMB with the new and easy to understand control panel, which can still be found in the current models. On its four smooth-running heavy-duty rollers and with the 1-phase 230V power connection, this very compact device can easily be put to use at any location in your plant. Fast, thanks to compact design The compact strapping frame covers a wide range of possible applications. Package sizes up to approx. 450mm x 500mm can be strapped with either 5mm or 9mm wide strap. This design makes the device particularly fast, because the strapping band only has to cover a short distance through the strapping frame. Strapping every second is therefore no problem. As good as new due to CUPASO major overhaul With our completely overhauled used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the AMPAG Sprint offered here. In terms of handling, availability and efficiency, it does not need to hide behind current models. And with our extensive major overhaul, we have simply turned back the clock for this device by around 14 years and offer you a technically and visually almost new device at less than half the price of a comparable new one. This is what we promise Our guarantee promise of a full 12 months naturally also applies to our SMB AMPAG Sprint. So you are on the safe side. If something should break during this time, we will replace the defective component and install it at our expense (excluding wear and tear and travel). - Frame size: 500 x 400 mm - Year of manufacture: 2009 - Machine number: 111A030921006 - Condition: Overhauled - Equipment: - Foot pedal on both sides - Triggering with table top sensor Cjbsn I Up Rj Exkt Ijgt - Special features: Extensively overhauled and full warranty for 12 months

Condition: good (used), Code: 0013 Brand: COSMEC - ITALY Model: SA/31-10 - CE Standard 3-axis CNC working centre with NESTING table for wood, furniture, panels, plastics, composites and various materials - CE Standard Table NESTING dimensions mm 3100 x 1000 X axis stroke mm 3250 - Y axis stroke mm 1400 - Z axis stroke mm 300 Feed speed X - Y mt/min 56 Feed speed Z mt/min 12 Maximum clearance above worktable mm 250 Milling unit Hp 10,7 (Kw 7,9) - ISO30 attachment at 18000 rpm Automatic tool changer with 6 positions - Inverter power Kw 11 - Rpm 500/18000 Vacuum pump 100 mc/h Numerical control OSAI series 10 Automatic lubrication Side guards Cgjb Exovur Auekt Ist Compressed air 8 bar Weight kg 3200

Condition: used, Year of construction: 2004, Functionality: fully functional, total height: 2,500 mm, total length: 23,224 mm, total width: 950 mm, Drum system Ceb Exjv S Aq Dskt Iogt

Condition: excellent (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly Station Automatic Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler (interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. 4.6.2 Function sequence This station consists of 4 partial stations: St 4.1 Screwing the chassis: - Visual inspection of the core hole position 6 - Positioning of the screwdriver by means of XY-Z servo axis port - 5x screwing from above St 4.2 Assembly of LW angle: - manual placing of the LW angle on the cycle belt handling - Ejecting and positioning of the LW angle by pneumat. Y-Handling - placing of the supplied LW angle on the chassis by means of pneumatic Y-drives Y-Z drives St. 4.3 Screwing the rear wall: - Aligning and fixing the rear panel by means of pneumat. Drives Ceb Exktjibiaqs Isgt - positioning of the screwdriver by means of X-Y-Z servo axis gantry - screwing the back wall St. 4.4 Screwing side walls: - Rotate WT+90°, fix right side wall and LW angle by pneumatic drives. - Positioning of the screwdriver by means of X-Y-Z servo axis portal - Screwing the right side wall - Turn WT-90° (-180° relative), fix left side wall and LW angle by pneumatic drives - Positioning of the screwdriver by means of X-Y-Z servo axis portal - screw left side wall - turn WT-180° (-90° relative) independent of machining each WT is turned -180 - WT leaves the station with the front to the front PLC system Beckhoff CX9020 Siemens Simatic HMI WSM screw unit WMS BB-01-B WSM PCS-7/1 operating panel WSM WFL 200 IU wieland RST20 Jetter JetMove 203B-230

Condition: good (used), Baler HSM V-Press 504 waste paper press Machine in perfect condition, like new. Cgeb Ejv H T Rwexkt Ijt Machine purchased from a warehouse, unused. Description: -HSM TCS (TorsionControlSystem) for controlling the inclination of the press plate Modern microprocessor control with membrane keyboard and graphic text display Suitable for both cardboard and foil Automatic start of the pressing process after closing the door Massive pressure plate and extremely stable pressure plate guide To fill the press, the upper half of the door opens to the right Door lock with knee lever for quick and safe door opening Manual bale strapping with polyester tape Pressure force: 40 kN Specific pressure force: 11.2 N/cm2 Drive power: 1.1 kW Voltage frequency: 230V / 50Hz Idle cycle time: 27 sec. Press capacity at idle speed (theor.): 3.75 m3/h Fill level: 661 mm Width x height of filling opening: 700 x 470 mm Bale length x bale width x bale height: 700 x 500 x 600 mm Bale weight: 60 kg Width x depth x height: 1020 x 812 x 1922 mm Weight: 290 kg Related product line: V-Press Consumable type: strapping tape

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 2822 Measurements depth 2050 Measurements height 3491 Machine weight 11000 Control Unit Brand FANUC Model 0i-TD Main Drive Spindle speed range 2000 Spindle bore 104 mm Tool taper A2-11 (ASA) Movement X-Axis Movement 430 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 800 mm Cgsbovg Tarj Exkt Ist Z-Axis Rapid Traverse 20 m/min Workpiece Workpiece drm over bed 890 mm Workpiece drm 810 mm This 3-axis SMEC PL 800VM RH vertical turning machine was manufactured in 2014. It features a maximum swing of Ø890 mm, turning diameter of Ø810 mm, and a turning length of 800 mm. Equipped with a Fanuc 0i-TD control and a 10.4” TFT LCD color monitor, it offers a spindle speed of 2000 rpm and a tool turret with 12 stations. Ideal for robust and precise machining. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 223A011235002, warranty duration: 12 months, year of last overhaul: 2024, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235002 Condition: Refurbished Prepared for integration into automated packaging lines Cgjb Exkteubuyko Ijt Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side • Identical machine available for parallel or cross strapping at high speed

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Cgjbjv Akcio Exkt Ijt Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Number of ram strokes, 1/min: 48 Cgjb Exktswbgine Iot Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Weight of the machine, kg: 27'000

Year of construction: 2016, Condition: used, Haewa / SMS Fraeskopf debarker Trolley made of a heavy welded steel construction 4 pairs of main drive wheels 1 split, toothed pair of main drive wheels Log drive with 2 speeds Hydraulics for ejector Frame arm made of a heavy steel construction cutter head: working width 300mm, beater bars, beater knives and overrun ring Milling head carbide tipped Hydraulic lowering of the milling head carriage drive frequency controlled, v = 0 - 60 m/min Type H 249 / 800 Master drive wheels 800mm log diameter 0,2m - 1,0m trunk length 2,0m - 6,0m ( also longer ) Cgjb Eocrp Aksxkt Iot Total connected load 35kW With control panel

Condition: good (used), overall dimensions 1850x1300x3100 mm; 1 trolley 1000x1000x2000 mm; power supply 400 V, 50 Hz; Cjb Exjr Ixynskt Isgt heating power 28,4 kW; motor power 3,4 kW; control computer Mikster; smoke generator external.

Condition: used, VIESSMANN/KÖB 2 X 350 KW (TOTAL POWER: 700 KW) ALREADY DISASSEMBLED !! READY TO TRANSPORT !! Two pieces Viessmann Köb 350-350 kw automatic wood fired boiler, can be operated in cascade mode ! So it can operate continuously up to 100-700 kw heat demand ! - Modern internet access with colour touch screen control ! - Cellular feeder guarantees to work without backburning with any kind of fuel (sawdust, chips, oats, sunflower hulls ) - Control boxes 3 years old ! Due to the strict Austrian environmental regulations on emissions, the entire control system had to be replaced with new sensors and regulators, so that the boiler meets the most stringent environmental standards ( 28000 euros for two complete new controls ) Ceb Exktolc Du Te Iogt - Can be monitored and controlled from a phone app - Both boilers samot brick renewed 2 years ago - Also the automatic expansion tank, high performance Grundfos pumps ! - Everything belongs to the boilers, 2x touch screen control panel, rotary valves, augers, new samott bricks, pumps, expansion vessel, etc. - Except the feeder ladders and the hydraulic pumps for the ladders - Price includes both boilers

Condition: excellent (used), Year of construction: 2013, Vertical Machining Center Machine type: POSmill E 2050 Control: Heidenhain iTNC 530 Year of manufacture: 2013 On-time hours: 16,442 h Spindle running hours: 4,200 h TECHNICAL DATA: Travel paths: X-axis: 2,050 mm Y-axis: 1,150 mm Csb Esv Syx Sexkt Iogt Z-axis: 700 mm Rapid traverse: (X/Y/Z): 25 m/min Feed rate: (X/Y/Z): 10 m/min Speed range: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table size: 2,200 x 1,000 mm Max. table load: 6,000 kg Features: Chip conveyor Internal cooling (IKZ): bar Electronic handwheel Measuring probe

Condition: used, Year of construction: 2020, Functionality: fully functional, machine/vehicle number: SN030855, warranty duration: 12 months, Machine type: COMPACTCUT 900 P/T floor saw without saw blade Year of manufacture: 2020 Origin: Repurchase, slight signs of wear Cgsb Ejv Txxtexkt Iot Maximum cutting depth: 100 mm Drive motor: Kohler ECH 940 gasoline Maximum output: 26 kW / 35 HP Weight: 621 kg

Year of construction: 1985, Condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Csb Eef A R Uzoxkt Isgt Working Height 1060 mm. Press Weight 102 tons total. Towler Hydraulics. Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Condition: used, 🔥 Guntamatic Biosmart 22 kW wood gasification boiler for sale – low consumption, high efficiency! 🔥 Are you looking for a compact, intelligent and energy-saving solution for heating a family house or smaller building? The Guntamatic Biosmart 22 wood gasification boiler is the perfect choice! Main features: 🌳 Wood gasification technology – low emissions, high efficiency ⚡ 22 kW power – for family houses, workshops, smaller systems 🧠 Automated control, easy to use Ceb Exktov Uw Nts Iegt ♻️ Economical and environmentally friendly – minimal emissions 🇦🇹 Austrian production, long service life, premium quality 💥💰 PRICE: 3,000 EUR – RELIABLE, GOOD CONDITION DEVICE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Quality, experience and reliability in heating technology.

Condition: used, Year of construction: 2022, Functionality: fully functional, machine/vehicle number: SN00010, warranty duration: 12 months, Machine type: Vacuum-Dry 103 BAG Year of manufacture: 2022 Condition: Returned, slight signs of wear Cgsb Exev Txunskt Ist Power: 3300 W - 50 Hz Air flow: 510 cubic meters/h

Year of construction: 2008, Condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Cebjn Awd Rs Exkt Isgt Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: used, Functionality: fully functional, Year of construction: 2022, machine/vehicle number: SN047236, overall weight: 960 kg, total length: 5,000 mm, total width: 15,000 mm, total height: 1,990 mm, working width: 1,500 mm, input voltage: 400 V, warranty duration: 12 months, Machine type: MAB 2001 masonry work platform with foot switch Year of manufacture: 2022 Condition: Repurchased, slight signs of wear Working width: 1500 mm Load capacity: 2000 kg Base frame: Max. height: 2.5 m Ceb Exjv Txp Sjkt Iogt Weight: 960 kg