Used Belflex Bf100H Sc for sale (62,717)

Condition: good (used), Code: 0340 Brand: CMS SCARPARI - ITALY Model: 120 Cut-off machine for wood parcel, trimming and sectioning timber bundles, used by packaging companies, pallets, crates, sawmills, timber merchants, framers, carpenters, window frames and various materials Cutting width mm 1250 Cutting height mm 1250 Right loading roller conveyor length mm 5000 - width mm 1400 - height mm 1000 - controlled by inverter Central cutting unit with blade HS/3 1550 with motor Hp 12,5 Lifting and lowering with self-braking gear motor Hp 1,5 with inverter Chain lubrication with hydraulic power unit Unloading roller conveyor on the left - length mm 4500 of which mm 2000 with motorised rollers and mm 2500 with idle rollers - Gear motor Hp 1 Barrier unit for measuring and programming the measurements to be cut, with max stroke mm 2000 N° 2 pack clamps with 1000 mm stroke Belt unit for transport and evacuation of trimming scraps Djb E Aetxy Hyjzraocg Compressed air 6 bar Suction mouth diameter mm 140

Condition: good (used), mileage: 824,006 km, power: 269 kW (365.74 HP), first registration: 02/2011, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 3,700 mm, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Unit) - Fixed - Sleeper Cabin Dsbjwf U Adj E Azraocg = Remarks = Number of axles: 2, Configuration: 4x2, Tare weight: 7640 kg, Gross weight: 18000 kg, Total tank capacity: 1000 liters, 2nd Diesel Tank, Fifth Wheel Height: 113 cm, Fifth Wheel: Fixed, Number of Locks: 1, Suspension Type: Air Suspension, Cabin Type: Sleeper Cabin, Cruise Control, Tachograph (Control Unit), Digital Tachograph, Air Conditioning, Auxiliary Heating, Color: Red, Engine Power: 269 kW (361 Hp), Transmission Type: Opti-Cruise, Gears: 12, Power Steering, ABS, ASR = Additional Information = Transmission Transmission: 12-speed, Automatic Axle Configuration Tyre Dimensions: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 10 mm; Right tire profile: 11 mm; Suspension: Leaf springs Axle 2: Twin tires; Left tire profile inside: 2 mm; Left tire profile outside: 1 mm; Right tire profile inside: 2 mm; Right tire profile outside: 4 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 598 x 255 x 332 cm Weight Unladen weight: 7,640 kg Payload: 10,360 kg GVW: 18,000 kg Environment Emission class: Euro 0 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, overall weight: 39,000 kg, empty load weight: 6,507 kg, maximum load weight: 32,493 kg, axle configuration: 3 axles, wheelbase: 7,700 mm, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,965 mm, loading space volume: 100 m³, first registration: 09/2014, next inspection (TÜV): 08/2025, suspension: air, color: blue, tire size: 385/65 R22,5, Year of construction: 2014, Equipment: ABS, Tare weight: 6507kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,965 mmTyre size: 385/65 R22.5, Loading area volume: 100 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 and 2x7 pin plug, Antispray, 4300mm Overall height based on an 1150mm 5th wheel., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Dsb Eowh Hamo Azrascg

Condition: good (used), Year of construction: 1993, machine/vehicle number: 190238, With motorized backgauge, numerical control, manual bending beam lowering, and foot switch. The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. Dcob E Azrjv Tvipoajg A test run will be performed. Sheet width: 3020 mm Steel sheet thickness: 2.0 mm Aluminum sheet thickness: 3.0 mm Stainless steel sheet thickness: 1.5 mm Backgauge: 1000 mm Color: green Total power requirement: 400 V Space requirement: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm Without roller shears/ Opening width: 200 mm

Condition: used, mileage: 541,637 km, Year of construction: 2009, Serial number: YS2P6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20262 Specifications: 2009 model. 541637 km. Euro 4T. Length: 1091 cm. Width: 260 cm. Wheelbase to second axle: 530 cm. Wheelbase to third axle: 135 cm. Net weight: 14500 kg. Max payload: 12425 kg. 340 hp. 250 kW. Automatic transmission, (opticruise). Help at tsj. 6x2. Vbg hook. Bed. Refrigerator and freezer. Aluminum floor in closet. Lift. Not Eu well deserved. See pictures for missing note.   Dcob E Azjwdvhrjrasg Description: Scania P340 with refrigerator and freezer for sale. It is not EU approved. The unit uses gas. Ready for delivery. Km: 541637 HK: 340 Technical approved: no EU-approved until: 08.04.2024 Own weight: 14500 Payload: 12425

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. SCM Superset PLUS Comp. 31 also for window production ----- Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm Dsb E Azovnv Uzorascg 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools Option: SCM RP-S NT transport system for returning the workpiece to the operator, see more Pictures under stock number 6793 (technical data according to the manufacturer - no guarantee!)

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Dcebjvkdtwj E Azrajg Weight kg 1780

Condition: used, Year of construction: 2003, total height: 2,500 mm, total length: 3,500 mm, total width: 2,450 mm, Empty weight: 4.500 kg Price: On request - Year: 2003 - Documentation available: No - CE mark available: Yes - Serial number: 208996 Dcsbowgc Iks E Azraeg - Control: CNC - Motor power: 7.5kW - Travel Z: 510mm - Model: kslijper - Travel X: 800mm - Grinding diameter: 300mm - Travel Y: 600mm - Table length: 800mm - Magnet size: 610mm - Table width: 420mm - Transport dimensions: 3500mm x 2450mm x 2500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Dsb Eenkal Do Azraecg

Condition: used, Year of construction: 2019, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Dsb Eswhfc He Azraocg Vacuum table: Yes Sensing of workpiece thickness: mechanical Main motor power: 11 kW Feedrate max: 9 m/min Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Protection against workpiece over-thickness: Yes Control: B&R Power Panel Conformity marking: CE mark Weight: 2.060 kg Space requirement Length: 2 m Space requirement Width: 1,9 m Space requirement Height: 2,4 m

Condition: used, Year of construction: 2004, Serial number: W09NTS3454EN1xxxx Please contact ATS Norway AS for more information Dob Eevg N Avs Azrascg Please provide reference number upon request: 17521 Specifications: - 2004 model - Tires (see pictures) - Length: 1,380 cm - Width: 255 cm - Wheelbase: 137/181 cm - Net weight: 8,300 kg - Hooks - New valves. - New brakes on 1st axle. Description: 2004 Schmitz Kapellsemi. The trailer is ready to be put into operation. New valves and recently changed brakes on the 1st axle. Can be delivered within a short time. Technical approved: Yes EU-approved until: 15.12.2024 Own weight: 8300 Total Weight: 45000 Payload: 36700 Width: 255 Length: 1380

Condition: used, Year of construction: 1990, cutting angle 90 ° cutting length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3,0 kW Dob E Aewgi Nhozrajcg weight 900 kg

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Dcobsvhc E Hs E Azraog Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: excellent (used), Year of construction: 1996, The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling structural holes, drilling rows of holes in a 32-hole grid system, and drilling various types of fittings. It enables all of these tasks to be performed quickly, precisely, and without extensive setup times. Simple operation via icons and 4 program presets allows for rapid changeover to the new work process. Central adjustment of the removable side stops ensures constant flushness at the front edge and precise drilling of left and right workpieces. It doesn't matter whether the parts are cut to size or at an accurate angle. The doweled corner joint is always flush, both on the edge and on the surface! No other CNC machine can achieve this with the simplicity and speed of a SCHEER DB 4. Safety clamping device across the entire table width allows workpieces to be clamped directly to the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports facilitate pushing and drilling long workpieces, while fold-up workpiece support tables facilitate row and hinged drilling. Dcsb E Azrjv Trk Neajg 2 drilling units Drill motor type BM 602-230/400 volts, 50 Hz, n=2860, 2.2 kW power 25-spindle drive unit Spindle pitch 32 mm For surface and end-face drilling. Gantry clearance: max. 950 mm Working length: max. 2360 mm Location: Arrives at the end of April at warehouse 54634 Bitburg Sold as is - no warranty - no guarantee - freight prepaid -

Condition: used, Year of construction: 2022, Cutting length: 4.300 mm Pusher stroke: 4.300 mm Number of grippers: 10 Feedrate max: 120 m/min Djb E Azewhfctjrajcg SCM HIGH SPEED: Yes Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 340 mm Main motor power: 9 kW Scoring saw: Motoric adjustment Groove cutting function: Yes Labelling: manually For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes Workpiece width measuring: Yes Workpiece length measurement: Yes SCM Saw Set: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MAESTRO CUT MANAGER, SCM MAESTRO CUT EDITOR, SCM MAESTRO CUT UTILITY, SCM MAESTRO OTTIMO CUT, SCM MAESTRO OTTIMO IMPORT, SCM MAESTRO PATTERN Conformity marking: CE mark Weight: 4.250 kg Space requirement Length: 7,1 m Space requirement Width: 6,4 m

Condition: used, mileage: 403,762 km, Year of construction: 2014, Serial number: YS2R6X4000210xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20020 Dcebjwdu Iks E Azrasg Specifications: - 2014 model - EU approved until: 10.11.25 - 581 hp - 403.762 km - Automatic transmission - 6x4 - Euro 6 engine - Front suspension: steel - Rear suspension: steel - Tires (see pictures) - Ploughing rig - Ploughing plate - New batteries - Relief - Air conditioning/ac - Extra lights on the roof - Webasto - Heated mirrors - Ready for delivery Description: We have a 2014 model Scania R580 6x4 tipper truck for sale. The car has previously been on a silver agreement, but the owner has taken care of the service and maintenance himself since then. The battery on the car has recently been changed, and everything works as it should according to the owner. The car is ready for delivery and ready for immediate takeover. Km: 403762 HK: 581 Technical approved: Yes EU-approved until: 10.11.2025 Own weight: 14400 Total Weight: 30000 Payload: 15525 Width: 255 Length: 762 Euro: 6 Gearbox: Automatic

Condition: good (used), Code: 0064 Brand: SCM Model: MULTIFLEX - CE Standard Working center for Window Frames (Tenoning / Profiling / Squaring) - CE Standard Technical data: Max working length mm 2800 Min/max workpiece height mm 30/140 Tenoning unit Automatic carriage with rotating anti-splinter device - Telescopic tilting guide for execution of inclined tenons End cutting saw diameter mm 400 - Motor Hp 4 Tenoning spindle max length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Exhaust outlet diameter of tenoning unit n° 2 x 120 mm Profiling unit Feed speed mt/min 1,5 - 16 - Motor Hp 1 1° Profiling spindle and time intervention - Length mm 160 Dcsb Eov Rd Ize Azrasg Spindle diameter mm 50 Motor Hp 7,5 Max tool diameter mm 220 Exhaust outlet diameter mm 150 2° Profile spindle - Length mm 320 Diameter mm 50 Motor Hp 7,5 Max tool diameter mm 220 Exhaust outlet diameter mm 150 Glaze bead recovery unit Motor Hp 3 - Rev/min 5000 Max tool diameter mm 220 F25 Exhaust outlet diameter mm 50 Electronic programmer for spindle positioning Memory capacity for up to 100 different work programs Compressed air 7 bar Overall dimensions for transport mm 2200 x 3300 x 1950 h Weight kg 2500

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Dcjbov Trlmo E Azrasg Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: used, Year of construction: 2022, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Polishing aggregate: Scotch Brite Vacuum table: Yes Vacuum fan: Yes Sensing of workpiece thickness: mechanical Main motor power: 18,5 kW Adjustable sanding belt speed: continuously variable Aggregates with frequency inverters: 1 Feedrate max: 9 m/min Dobjwhfcmo E Azraecg Continuously variable feed: Yes Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Control: SCM eye-S Conformity marking: CE mark Weight: 2.060 kg

Condition: excellent (used), Year of construction: 1999, Used, excellent condition, little used Make: Scheer Type: FM12 - 8 - 3100 K Year of manufacture: 1999 Power: 2.21 kW Saw feed / handwheel Dcob E Azrev Trlyoajg Cutting length: 3100 mm Pneumatic clamping Rear support table Strip stop with stop finger Parallel stop Space required: approx. 4200 mm x 1200 mm x 1200 mm Location: Arrives at warehouse 54634 Bitburg, available end of April Free on freight, unpacked Sold in as-is condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2022, Working dimension X: 5.020 mm Working dimension Y: 1.680 mm Dcob Eowhfcgo Azraog Working dimension Z: 170 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Blow-off device: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: 5-axes spindle SCM 5-axes spindle PRISMA KT: Yes Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer RAPID 16: Yes SCM Tool changer TR 12: Yes Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction SCM Drilling aggregate F 26 L: Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Three stop ranges: Yes Number of consoles: 8 Self-adjusting machine table: Yes SCM Machine table MATIC: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Special workpiece clamping system: For windows Anzahl Sonderspanner: 4 Barcode reader: Yes Safety device: Bumper, Light barrier Chip conveyor: Yes Interface for .dxf data: Yes Tool charge measurement: Yes Remote control: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE CNC, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Dcjb E Aovmivcszraeg Without guarantee - without warranty -

Condition: used, Year of construction: 2022, Working dimension X: 3.117 mm Working dimension Y: 2.177 mm Working dimension Z: 150 mm Number of milling spindles: 1 Blow-off device: Yes Main motor power: 14 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 18 SCM Tool changer FAST 18: Yes Tool changing auxiliary device: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, 90° turnable SCM Drilling aggregate F 23 LR: Yes SCM : Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table SCM Machine table HE Multi function table: Yes Multi-zone vacuum: Yes Dynamic vacuum: Yes Anzahl Vakuumzonen: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Feeding: Vakuum-Einzugsvorrichtung, Panel storage system Outfeed: discharge unit Safety device: Bumper, Light barrier SCM Pro-Speed: Yes Interface for .dxf data: Yes Dsb E Azswhfcasraocg SCM TecPad: Yes Automatic central lubrication: Yes Tool charge measurement: Yes SCM S-N-D three-position selector switch: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MSL, SCM NESTING FREE-FORM, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Deb E Azswhfb Nsrascg Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: used, Year of construction: 2020, Workpiece return: Conveyor belt Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 20 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.055 mm Infeed barrier: Yes Control: SCM eye-M Conformity marking: CE mark Dsbewhfb Ao E Azraocg Weight: 2.820 kg