Used Fmb Saturn G for sale (29)

Condition: new, Electrical voltage 400 / 440 V Djded R Uzzepfx Af Dscc Frequency 50 / 60 Hz N° Phases 3 / 3 Ph

Condition: like new (used), Year of construction: 2019, functionality: fully functional, saw band length: 2,490 mm, I sell mettal cuting saw , not much used, in very good condition.... Dcodpjx Rcmbjfx Af Doc

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Dsdpfx Ajgculvsf Djcc Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2002, condition: ready for operation (used), diameter 2-23 mm length 4200 mm Dedpfextfzqex Af Docc

Condition: ready for operation (used), Year of construction: 2002, A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment. Dcodoxph Swjpfx Af Doc

Condition: used, Barloader FMB Micromag 20/3200"C" Dcodjwgpcujpfx Af Doc

Condition: used, TECHNICAL DETAILS - bar diameter : 0,8 - 18 [mm] - bar length : 3200 [mm] - stroller diameter : 15 [mm] - channel diameter : 18 [mm] - necessary power : 1,5 [kw] - loading time : approx. 22 sec (with bar of 3200 mm) - oil filling : 50 [l] - viscosity 100 [cSt] at : 40 [°C] - weight : 500 [kg] Djdsuhbifepfx Af Djcc - max. remnant length : 300 [mm]

Condition: used, TECHNICAL DETAILS - bar diameter : 0,8 - 18 [mm] - bar length : 3200 [mm] Dcodpfx Afjuhbh Uj Djc - stroller diameter : 15 [mm] - channel diameter : 18 [mm] - necessary power : 1,5 [kw] - loading time : approx. 22 sec (with bar of 3200 mm) - oil filling : 50 [l] - viscosity 100 [cSt] at : 40 [°C] - weight : 500 [kg] - max. remnant length : 300 [mm]

Condition: used, Year of construction: 1996, Bar loader FMB type Turbo ET 425 / 3000 stood on an Emco lathe Dedpfx Asugv Uaof Dscc

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr231478, FMB TURBO 3-26 3200 A bar feeder, year of manufacture 2003 Country of origin: Germany CE Declaration of Conformity Technical data: Bar diameter: 3-26 mm Bar length: 3200 mm Last installed on a CNC sliding head lathe WEIGHT AND DIMENSIONS Dimensions of the bar feeder: approx. 4300 x 701 x 1400 mm Dodpsyhfvxsfx Af Decc Weight of the bar feeder: approx. 980 kg The machine can be viewed under power by prior appointment. Technical data and specifications subject to change and error, prior sale reserved!

Condition: new, Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9 Dcodpjd R Uz Tefx Af Dsc

Condition: good (used), Year of construction: 2014, functionality: fully functional, control type: NC control, The stand is great. Channel set d55 Dcsdpfjyg Datsx Af Doc

Year of construction: 2006, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: FMB Blickle, hydraulic unit with hydraulic tank from rotary transfer machine Uldrian TSM 22-8 -Hydraulic pump: pressure up to 120 bar -Flow rate: 22 l/min -Motor: 4 kW / 1500 rpm -Hydraulic tank: with level indicator, tank capacity 100 l Dcedpfxem Dyh Ro Af Dsc -Oil cooler -Individual components: see photos -Dimensions: 720/500/H1630 mm -Weight: 293 kg

Condition: used, Year of construction: 2007, functionality: fully functional, saw band length: 3,180 mm, saw band width: 27 mm, cutting range round steel at 90°: 240 mm, power: 2.4 kW (3.26 HP), Capacity 90°: Ø240 mm./220 x 300 mm. Capacity 45° right: Ø200 mm./100 x 200 mm. Capacity 60° right: Ø120 mm./160 x 110 mm. Blade dimension: 3180 x 27 x 0,9 mm. Blade speed: 16-80 m./min. (Variable) Dedpfxsxn Skbj Af Docc Motor: 2,4 kW. Year: 2007 Country of origin: Italy. Size (L x W x H): 2600 x 1800 x 1900 mm. Weight: 1150 kg. With variable cutting speed, 500 mm. multiple feed stroke, digital readout of bow position, Unist oil mist cooling unit and pressure regulating of vices All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 2005, Technical details: Total power requirement: 6,4 kW machine weight approx.: 250 kg dimensions L x W x H: 1,4 x 0,9 x 1,4 m 2 pieces DOSING SYSTEM available. technical Details: - system pressure 125 bar - flow rate 3 l/min - reservoir preload pressure 80 bar - Motor SEW Eurodrive, 1410/1710 U/min erquipped: - hydraulic tank with 200 liter content, size L:850 x W:630 x H:380mm - oil basin size L:1100 x W:850 x H:380mm * Dodpfx Asu N E Nusf Docc

Condition: used, Year of construction: 1999, FMB Turbo bar feeder Turbo 10-65XT/3200, previously installed on a Traub TNC65 TX8H Djdpfjyazh Ijx Af Djcc

Year of construction: 2012, condition: ready for operation (used), An FMB bar feeder including a bundle loader is available. Bar diameter range: 8mm-80mm, max. bar length: 3200mm, feed speed: 1000mm/s, return speed: 1400mm/s, max. remnant length: 580mm. Machine dimensions X/Y: approx. 4700mm/1500mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible. Dodpfjx Tumlsx Af Decc

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Dcodpfxox S Rbpe Af Dsc

Year of construction: 2012, condition: ready for operation (used), controller manufacturer: OKUMA, This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information. Application Types Dedpox D Iwisfx Af Dscc Other Automation Equipment

Condition: new, Rexroth FMB Blickle 15987 pressure stage block SA 2646 S&K50/08 , serial no. acc. to photo , coil voltage 24 VDC ,unused, 100% functional, scope of delivery acc. to photos Dodpfji Ectksx Af Djcc

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. Dedoxx R S Eepfx Af Docc - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dcjdpfx Ajxx Sawjf Doc Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Dcjdewaauujpfx Af Dec Blade cutting speed: 20-100m/min Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Year of construction: 1990, condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Dodpfedlm Dhox Af Docc Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Condition: used, Year of construction: 1991, bar material dia. 65 mm bar length 3000 mm voltage 400 V Dedpfehuf Stox Af Decc weight of the machine ca. 1,2 t dimensions of the machine ca. 5,32 x 0,95 x 1,52 m