Used Ciata T1000/Dp for sale (3,235)

Condition: new, weight max. 10 t Fgolq R Ugsfv A A Ajpeb workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Year of construction: 2000, Condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH Fjlqsfc I Haj R Ugpogb More technical details you found in the Datasheet.

Year of construction: 2012, Condition: excellent (used), machine/vehicle number: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L manipulator handling device lifting aid Payload at full radius 12+15KG Height: approx. 3.3m Folq Rjpwgrfo Ugpegb UK boom: approx. 3.2m Projection: approx. 1.50+1.50m = 3m Weight completely approx. 300kg with gripper and operation Height: approx. 2.7m UK boom: approx. 2.6m Projection: approx. 1.40+1.40m = 2.8m Weight completely approx. 300kg Bfor7sx3woe without gripper and operation Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim See pictures Shipping by courier or collection only by appointment

Condition: good (used), Saugleistung 55 m³/h ,2,2 kW , 60Hz ,Vacuum 3x10-² Fgjleh A Ic Asq R Ugpob

Year of construction: 2022, operating hours: 250 h, Condition: used, total length: 2,780 mm, lifting height: 4,800 mm, free lift: 1,460 mm, mast type: triplex, construction height: 2,290 mm, fork length: 1,200 mm, fork carriage width: 1,100 mm, engine type: LS L4CRV-T6, drive type: Diesel, load capacity: 3,500 kg, construction width: 1,250 mm, net weight: 5,100 kg, Diesel forklift Load center: 500 Fgolq R Uet Dd I Rsgpeb Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: As good as new Technical condition: Very good Front tires Type: Superelastic Front tires Size: 28x9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50-10 Rear tires Condition: 80 - 100% Description: Full cab with heating, working lights front + rear, 3rd + 4th valve to fork carriage, rotating beacon, indicators, hand lever Sideshift, fork positioner, Fork positioner with sideshift, opening range: IK- IK 70- 750 mm 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, full free lift, exterior mirrors, rotating beacon, windshield wiper, LED, seat,

Condition: used, overall weight: 36,000 kg, empty load weight: 7,200 kg, maximum load weight: 28,800 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,460 mm, first registration: 09/2004, suspension: air-lift, color: blue, tire size: 385/65 r22,5, machine/vehicle number: 231, Equipment: ABS, Disc brake EBS Wheelbase 1,310 mm BPW axles Lifting and lowering device Errors excepted Fgjlq R Usnn Dpljgpsb

Condition: new, weight max. 5 t workpiece diameter 100-2500 mm gear diameter 250 mm gear width 140 mm total power requirement 0,8 kW weight of the machine ca. 0,8 t Fjlq R Ugjfv A Axjpsgb dimensions of the machine ca. 2,0 x 1,4 x 1,0 m

Year of construction: 2020, Condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Fgslsfwfpbjq R Ugpsb Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Year of construction: 2022, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: 1793, NEW MOTORIZED PORTAL CRANE, MFG 2022, brand COMEGE PORTMOT 5000/7/, produced in Romania with French components, load capacity 5,000 kg, max load: 5,000 kg; frame 7000 x 5250 mm; hoist stroke between poles: 6000 mm; height to the transverse beam: 4800 mm; chain hoist; motorized travel; own weight without accessories: 1600 kg; 2 fixed motorized wheels; 2 rotating wheels; obstacle detectors mounted in each corner; excellent optical and technical condition. Many manufacturers already have this type of product, but it stands out for its ability to move a load of up to 5 To, controlled by a radio control by rolling and rotating in all directions directly on the ground. In fact, no railway or civil engineering is required for its use. The motorized gantry also gives you the ability to move a load from one workshop to another. Safety is ensured thanks to the 4 full stop detectors. The portal allows rotation on its own due to the inversion of the motors and the collector connected to the electrical source offers the user the possibility to do 360°. For Romanian companies, there is the possibility of leasing. Price Euro 33,900 Euro + VAT, FCA: Oradea / Romania Fjlq R Ugsum Hhlopsgb Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1988, Condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Fgjlqof Rth Ts R Ugpsb Made in Denmark Hansen - Hundebol AS

Year of construction: 2014, operating hours: 4,128 h, Condition: used, lifting height: 4,568 mm, free lift: 1,450 mm, mast type: triplex, construction height: 2,190 mm, fork length: 1,400 mm, fork carriage width: 1,067 mm, engine type: Yanmar 4TNE92-NMH, drive type: Diesel, load capacity: 3,000 kg, construction width: 1,330 mm, net weight: 4,630 kg, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Techtronix 100 gearbox Condition: Ready for use and fully functional Technical condition: good Fgelet Dd I Djq R Ugpsb Front tires Type: Superelastic Front tires Size: 8.15-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50-10 Rear tires Condition: 80 - 100% Description: Full cab with heating, working lights front + rear, 3rd + 4th valve to fork carriage, rotating beacon, 4x mini levers, code lock turning device, sideshift, integrated sideshift, Kaup 360° rotator 2.5T351.1 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, interior mirror, rotating beacon, windshield wiper, seat, code lock

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Fgolji Apuheq R Ugpob Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, For sale ultrasonic welding machine from Zemat. The machine with a single table. Fgolq Rjumhl So Ugpob

Year of construction: 2020, Condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given. Fgolqjfx N Uie R Ugpeb

Condition: used, mileage: 999 km, first registration: 01/1900, Snow blower SFT 1000, 200cm wide, drive via PTO shaft Errors and typing errors possible, subject to prior sale! Fjloqxubfsq R Ugpogb

Condition: excellent (used), Year of construction: 2008, I sell the fourside moulder Weinig POWERMAT 1000, year 2008 Feeding device Grasten Maskinservice Working width 320mm Working height 130mm 8 spindles configuration: Bottom Right Left Right Top - 8000rpm Bottom - 8000rpm Top - 8000rpm Bottom - 8000rpm 3-zone pneumatical pressure Good condition Fully working! Available immediately Including full documentation and CE certyficate. Fgolq R Ugjt Rpafopjb

Condition: excellent (used), Max cutting height 150mm Max cutting width 500mm Folq R Uetqwg Asgpsgb Feed has rollers

Condition: used, Year of construction: 2016, Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments The dimensions of the raw material wsdowego The length of the elements batch mm 170 ÷ 900 The amount of cutting mm 20 ÷ 155 The width of the package of workpieces 600 mm Capable of milling tools with a length of 10 mm teeth (5, 15, 20 optional) Duty cycle automatic with manual loading of the material Air working pressure of 0.6 MPa Compressed air requirement m3 / h approximately 10 Performance exhaust ventilation m3 / h approx. 6000 Performance cykl./min approx. 2.5 Carriage speed m / min Working 10-23 return 32 Operating voltage AC 3x400 V + N + PE The frequency of 50 Hz Control voltage 24 V DC The starting system drives the cutter SoftStart Control of spindle speed rpm. 6000 ÷ 4500 Fjlq R Uoc U Txkegpsgb Protection against drop in air pressure below 0.45 MPa Mills operating in diameter? 200? 250 (optional? 160 to? 200) - does not fall within the scope delivery Possibility of międzycięć pre zaczopowanej strip: possible to program the number of sections - 8 accuracy of approx. 10 mm in a single section (depending on the number and length czopowanych elements)

Condition: ready for operation (used), Functionality: fully functional, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, Machine equipment: LNS bar loader, 2x turrets (right turret uncoupled, only left turret ready for operation), and 2x spindles (both ready for operation). Condition: Crack in the movement screw of the lower turret, turret uncoupled. Only functional with 1 turret. Almost new hydraulic unit. Cracked chuck, see photo. A replacement is included in the box with the machine. TECHNICAL DETAILS Diameter over slide: max. 250 mm Diameter: max. 190 mm Main spindle speed: 6000 rpm Counter spindle speed: 6000 rpm C-axis: 0.001 Y-axis: ± 40 mm Turret 1: 16 stations Fjlq Roug Upps Ugpjgb Turret 2: 16 stations Tool speed: 6000 rpm Control system: MSX-501 Spindle motor power: 5.5 / 3.7 / 2.2 kW

Condition: new, Functionality: fully functional, power: 6 kW (8.16 HP), operation weight: 3,000 kg, Year of construction: 2024, operating hours: 1 h, machine/vehicle number: 0058, Equipment: hydraulics, rubber tracks, Vibrating sorter Molesorter PREMIUM 3VD PHG-PD Fgslq R Uounr Nkegpob The new vibratory classifier for bulk materials. Input hopper with regulated feed conveyor, 3 fractions + oversize. Side telescopic conveyors 5,5 m, built-in generator, hopper width 2800 mm, container carrier DIN 30720 hook height 1000 or 1570 mm, maximum weight 3150kg hourly output up to 90 t/hr, power 6 kW. Delivery 1/2025

Condition: used, Functionality: fully functional, Year of construction: 2019, load capacity: 3,200 kg, Double pallet fork Fgolq Revb R Aas Ugpob ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 3A (51 cm) Capacity 3200 kg / 600 mm Sideshift Opening range 560-1940 mm Width 1200 mm Forks 1200 mm ID OS1499

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm Folq R Ujtrl R Ajgpegb 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: used, Functionality: fully functional, Year of construction: 2018, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Fgeljvbmt Ioq R Ugpeb Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 2500 kg Sideshift Opening range 560-1940 mm Width 1200 mm Forks 1200 mm ID OS1419

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, DHP HYDRAULIC STATION LIFT - 1.5t DHP hydraulic bench jack is used for stepless lifting and lowering of material at assembly, loading and machining stations with table dimensions similar to EUR pallet, allows to maintain a constant working level when loading or unloading material. Lifting of the lift table is carried out by means of two hydraulic cylinders, powered from a compact electro-hydraulic unit, controlled from the cassette. The cassette is equipped with "lifting", "lowering" and "EMERGENCY STOP" buttons. Load capacity max kg 1500 Dimensions of the table standard mm 900x2000 Height in folded state (standard) mm ~230 Fgslqjt Ubn Ns R Ugpsb Working stroke (max) mm 1100 Lifting time s approx. 30 Pressure in the hydraulic system MPa max 16 Noise level dBA approx. 72 Installed power kW 1.1 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Weight of the device kg ~450

Condition: used, Year of construction: 2018, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Fgslq R Ugjud Eb Rjpob Description: Year 2018 ISO 2A (41 cm) Sideshift Capacity 2500 kg Opening range 560-1940 mm Width 1200 mm Forks 2400 mm ID OS1399