Used Ciata Thi-50 for sale (87,532)

Condition: good (used), The scope of delivery includes: 08x steel panel with support angle, used Manufacturer: SSI Schaefer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm contact surface: approx. 16 mm weight | pcs.: approx. 7,650 kg 01x steel panel end termination, used Manufacturer: SSI Schäfer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm Duebeppt N Sou U Dqget total width: approx. 300 mm total height: approx. 50/40 mm weight | pcs.: approx. 7,830 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Year of construction: 2015, Condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm Duobuovdt Hgs U Dqget round table 0,75 kW In our opinion, the machine is in good condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: like new (used), Year of construction: 2001, operating hours: 183 h, frequency: 50 Hz, fuel: diesel, We have a used generator with a Perkins engine for sale, in mint condition and with a silencer. Technical specifications: Manufacturer: FG Wilson Model: P250H Engine: Perkins 6-cylinder turbo diesel, water-cooled. Power: 250 kVA / 200 kW RPM: 1500 rpm Frequency: 50 Hz Voltage: 230/400 volts Operating hours: 183 hours Duebu U Dov R Eg Soqget Year of manufacture: 2001 - Includes control unit - Includes batteries - Includes silencer - Includes circuit breaker - Location: 24229 Dänischenhagen - Delivery is available for an additional charge.

Condition: refurbished (used), Year of construction: 2003, Completely overhauled folding machine, built in 2002, in absolutely mint condition. Counter reading: 23 million, rollers in mint condition. Formats: min: 110 x 100 mm, max: 520 x 850 mm Smallest folding length: 35 mm, 60 jobs can be stored. First folding unit: 4 automatic buckle plates, automatic roller and stop adjustment. Steel segment rollers, mint condition. FSA flat pile feeder with side blower. Pico compressor. Intermittent AM 52 delivery. Bridge. 380 volts / 16 A. All maintenance-free three-phase motors. Duobjwctuysu U Dqgst Original pictures. Machine is in our demonstration room. Can be inspected and tested at any time. 1-year warranty on electrical components. Available: immediately.

Year of construction: 2016, Condition: as good as new (ex-display), machine/vehicle number: F901/37, Technical specifications: 1 ABUS LS pillar jib crane NL 250KG Payload at full radius 250KG / 0.25to payload Height: approx. 3.9m, UK boom: approx. 3.4m Outreach: approx. 2m, hook height: approx. 3.05m Weight complete approx. 450 kg with 250Kg Abus chain hoist with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Inspection book is available Very good condition, see pictures Location is 75053 Gondelsheim Duebu Ujm Tg Due Dqgst Only the crane system shown in the pictures is being sold Shipping by forwarding agent or collection by appointment

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Dujbu Uev Hxxye Dqgot Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: excellent (used), The scope of delivery includes: 1x steel panel, used Material color: Sendzimir galvanized Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Crossbeam support: approx. 58 mm Djbjhzhrgeu U Dqgout Material thickness: approx. 2.00 mm Weight per piece: approx. 15.00 kg Note: - The steel panels have a frame for the crossbeams on one side. (Height: approx. 25 mm) - The other side is continuous and, with an approx. 22 mm high upstand, serves as a push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 3 pieces 3,000 mm – 4 pieces 3,750 mm – 5 pieces Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2012, Condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of Djbu Uevki Ruj Dqgeut delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Dsbu U Dqjv Umm Ijgout Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, Completely overhauled folding machine, built in 2005 in absolutely mint condition. Counter reading: 4.4 million, new rollers Formats: min: 110 x 100 mm, max: 520 x 850 mm Minimum folding length: 35 mm Dusbu U Dqjwcttcogst 60 jobs can be stored First and second folding units, 4 automatic buckle plates, automatic rollers and stop adjustment Steel segment rollers, overhauled rollers FSA flat pile feeder with side blower Pico compressor Intermittent AM 52 delivery Bridge 380 volts / 16 A, all maintenance-free three-phase motors Original pictures, machine is in our demonstration room Can be inspected and tested at any time. 1-year warranty on electrical components Available: immediately

Year of construction: 2006, Condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m Djbujiwdaqo U Dqgeut UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) incl. Demag DC 500KG chain hoist Crane is dismantled and available immediately Item location is 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: good (used), Year of construction: 2008, The drumstick and thigh deboner: Deboning capacity of up to 1000 pieces per hour +-. the drum and thigh deboner is rotating, and has 5 units, and 5 diaphragms Dusbu Ujr Igp Ie Dqgot 120x90x180 - 250 kg

Condition: excellent (used), Mathis Colorstar Junior stainer CJ-R 8606 Laboratory stainer The Colorstar type “CJ” is a 1-position stainer for use in company laboratories and research institutes. The dyeing works according to the winding and packing system in the pull-out process, whereby the dye liquor is passed through the stationary material sample, reversing inside/outside or outside/inside. The built-in vacuum pressure pump creates the desired atmosphere in the treatment room. The “CJ” is particularly suitable for dyeing: - Woven and knitted fabrics on piece beam - Yarns on cross-wound bobbins - Flock, fibers and combed top in the dyeing basket The liquor flow direction is reversible from inside to outside and vice versa, whereby the duration can be adjusted. liquor ratio approx. 1:8 and higher. Dsbuou D Dr Ro U Dqgsut In addition to the round full-view dyeing station made of borosilicate glass, the apparatus consists of the following components ● Pressure pump for setting a static pressure ● Vacuum pump for deaerating the textile material ● Pressure gauge -1 to + 9 bar for static pressure display of the dye container ● Safety and venting valve ● Swivel HT lid ● Connection for airlock ● Device for filling, flushing and draining ● Integrated cooling (water) and heating (electric) ● Connection socket for: Temperature recording (0 -140 °C) Option also for flow rate (0 - 5 l/min) Differential pressure (0 - 5 bar) pH values (0 -14) Purchase price: 67400,- € Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 1946, Condition: used, Vats - Installation of 4 concrete vats (building) including: - Agitators - Pumps - Valves - Piping - Installation of 1 concrete vat with: - Agitator - Pumps - WACO filter - Piping ----- Purification - 5 purifiers + KADANT BLACK CLAWSON Fibernet - Tank - Sand removal screw - Conical stainless steel pulp chest - LAMORT purifier (partially dismantled, as is) ----- Supply - ALLIBE stainless steel vat - Pumps - Regulator - Control system ----- Starch water pumps - 2 MORET motor pump units - Stainless steel tank - Equipment for concrete vat (building) - Pumps - Piping ----- Paper Machine No.2 Brand: NEYRET-CORDEBART-THIRY – Year: 1946 Width: 2450 mm Hood and steam installation: BELLMER 1) Wet section - Natural drying: - 6 stainless steel suction boxes for paper dewatering - Mechanical drying: - 7 suction boxes with ceramic and plastic linings - Suction cylinder 2) Press section - Press No.1 with 2 cylinders (pneumatic tightening, LAMORT doctor blade) - Press No.2 with 2 cylinders (pneumatic tightening, LAMORT doctor blade) - Press No.3 with 2 cylinders (pneumatic tightening, LAMORT doctor blade) - Press No.4 "OFFSET Press" with 2 cylinders (hydraulic tightening) 3) Dryer section Installed in a large BELLMER suction cabin with automatic doors – humidity control system - Pre-dryer section: - 24 drying drums - 5 felt dryers - 23 doctor blades - Size press: - 2 cylinders - Pneumatic tightening - Reducer - 2 doctor blades - Post-dryer section: - 14 drying drums - Drying system: LANG (steam-based) 4) End of line - Rewinder with multiple cylinders - Sheet cutter: IBS RCS 5000 - Pneumatic equipment ----- Duebu U Dqowbg Svegst MAP 2 Control Room - Digital control desks - Electronic installation - Paper monitoring scanner - Small furniture: coffee machine, top refrigerator, hot oven THERMOS SR1000 - Insect destroyer - Workbenches, vise, small rack ----- MAP 2 Sauce Kitchen - Remote-controlled sauce distribution network - Stainless steel storage - Agitator - Pumps - Valves - Filters ----- Sauce Preparation Kitchen (similar to MAP 1 and MAP 2) - 100T starch silo (old) with: - Valves - Dispenser - 2 pumps - Milk preparation tank - 2 dosing units for retention products (old) - Suspended milk cooker with digital control including: - Agitator - Pump - Double-jacket delumper - Steam extraction system - Tanks, pumps, mixers - Piping - Colorant installation ----- Vacuum Production Installation - 8 ALLIMAND vacuum pumps ----- Sauce Distribution Network

Condition: good (used), Tunnel passage width: 540 mm Dusbu U Dehinmfeqgot Tunnel passage height: 40 mm Quantity: 3 pieces Price/piece

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, Completely overhauled folding machine, built in 2002, in absolutely top condition. Mileage approx. 7.8 million New steel segment rollers, completely overhauled Completely new bearings, Almost new condition. Features: First folding unit with 4 automatic buckle plates Formats: min: 110 x 100 mm, max: 380 x 850 mm Smallest fold length 35 mm PBA underfloor suction feeder with loader Sheet travel monitoring, double sheet detection, Stream delivery 1-year warranty on electronics 380 volts / 16 A all maintenance-free three-phase motors Dusbu U Dqewctquegst Original pictures, machine is in our demonstration room Available: immediately 1-year warranty on electrical parts according to our warranty terms Delivery and installation with instruction available for a fee (Germany, France, Switzerland, Austria, Italy)

Year of construction: 1985, Condition: excellent (used), machine/vehicle number: (20020324 EG) - VK-RES, DEMAG KBK crane canopy crane runway with dimensions approx. 16.5 x 7 m (7 m bridge - double-girder crane) Payload / lifting capacity 500 kg - 0.5 tonnes Technical specifications of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable tray, brackets/suspension, etc. Incl. Demag PK2 500 kg chain hoist - lifting height approx. 4.5 m Crane is disassembled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or pickup by appointment only Debuoty S I Ee U Dqgjut Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125kg - 1600kg Please inquire about your crane runway, including load capacity and dimensions, without obligation.

Condition: used, Year of construction: 1999, Functionality: fully functional, Equipment: type plate available, 3500 kVA oil transformer, SGB, built 1999, with expander, Buchholz relay, 22 kV - 4 x 400V / 20kV, switching group Ya0(d), with diverter switch, dial thermometer, Dujbu U Dqet Iu Shegst OS/US porcelain bushings

Condition: good (used), Mathis HVF 62102 2 rollers laboratory padder Vertical and horizontal padding The HVF is a versatile padder. The vertical or horizontal working position can be easily position at any time, allowing the HVF to be used for a variety of purposes Manual samples, but also entire docks with several meters of material can be impregnated evenly and reproducibly with the HVF. impregnate, dye, finish, hydrophobize and finish evenly and reproducibly. Areas of application Djbu U Dqeu D Eq Usgout The HVF can be used universally, in the chemical and dye industries, in the textile industry, but also in research institutes and development departments for individual and series tests. Simple handling Switching from the horizontal to the vertical working position is possible without tools, with a simple handle. All operating elements are clearly arranged on a control panel. The fabric speed is infinitely variable between 0.2 and 10 m/min. The current speed is displayed digitally. Roller width: 350 mm Roller diameter 110 mm Roller speed: 2-10 m/min Net weight: approx. 220 kg Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Functionality: fully functional, load capacity: 18,000 kg, total height: 3,650 mm, rotary table diameter: 2,130 mm, overall weight: 13,000 kg, table load: 18,000 kg, pivoting range: 135 °, disc diameter: 2,130 mm, For sale: 1 used welding positioner Manufacturer: Worthington type: 400P Table diameter: 2.130mm max. weight on the table: 18.000Kg Rotation of the table: 360degrees Djbu U Dqsrpmzmsgout Table inclination 135degrees Variable table speed: 0.2 - 3 rpm Mass approx.: 13.000Kg Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: ready for operation (used), length 2550mm Debuof Rkzmo U Dqgeut width 1310mm thickness 350mm Weight : 3500 Kg

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 7,500 mm Dusbu U Dekr Uzbeqgst Number of bays per row of shelves: 03 pcs. 2,400 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes: 04x pallet rack uprights, new Material color: sendzimir galvanized Material color base plates: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, foot plates The uprights are unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The shelf stands are supplied unassembled. We are happy to pre-assemble the shelf uprights for a an extra charge of € 17.50 plus 19% VAT. 12x pallet rack traverse, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE Bracket: 5 HK (hooks) Clear width: 2,400 mm Max. load per truss pair 1,600 kg, with evenly distributed load 06x chipboard II. Choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated ( if necessary two-piece ) 48x Z-brackets for locking / inserting chipboard Surface: galvanized Suitable for chipboard shelves from 22 - 38 mm, can be turned and used on both sides For width 40 mm 24x locking pins, new Version: completely galvanized To secure the side rails against unintentional lifting out 16x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 08x shims, new Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2010, 3500 kVA cast resin transformer, SGB, 2010, 20 kV +-2x2.5% / 0.69 kV, Dyn5 Dusbusuv D N Ho U Dqgst

Condition: good (used), Turning diameter over bed: 500 mm turning length: 2000 mm Dujbu U Dqjik Hbljgjt Turning diameter over slide: 340 mm

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 15,100 mm Number of bays per shelf row: 05 pcs. Number of levels plus floor level: 04 pcs. Technical data on volume: Pallet spaces per bay: 15 pcs. Pallet spaces per rack row: 75 pcs. Total pallet spaces: 75 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Profile dimensions: 100 x 75 x 2.5 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 8,000 mm high 1,050 mm deep 40x pallet rack beams, second choice Material color: blue Box profile: 120 x 40 mm Dsbu U Dorq A U Noqgsut Beam type: TRV1-290-124-30 CE Clear width: 2,900 mm Max. load per pair of spreader beams 3,000 kg, with evenly distributed load 80x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.