Used Ciata Thi-50 for sale (87,817)

Condition: used, tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder Djb Hlrevaxclstcskl -Milling holder: SK50 holder -Shaft: Ø 80 mm / bore Ø 50 mm -Dimensions: Ø 98 x 235 mm -Weight: 5.3 kg

Condition: reconditioned (used), Fully refurbished and tested. Very good condition. Complete with tools for bowl cyclone foundation plate vibration damping feet Debsuccrks Hlrtcjkl owm - operating water module controlcabinette (not tested or reconditioned)

Condition: used, mileage: 115,000 km, power: 265 kW (360.30 HP), first registration: 08/2022, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Iveco Crossway LE 14.50 m with 50 seats & 75 standing places - 2 vehicles available Dksb Hlrsvxnbzjtcol * Diesel - 8,710 cc - 265 KW - 360 HP - Euro 6 - Green sticker - TÜV NEW - * 50 passenger seats + 1 driver - 75 standing places - 1 wheelchair space - * Auxiliary heating / radio / ABS / ASR / retarder - double-width door at the rear - single door at the front - * LAWO matrix system - automatic transmission - air conditioning - * Vehicle dimensions: length: 14.0 mm x width: 2,550 mm x height: 3,205 mm * Vehicle 1: KM reading: approx. 115,000 KM - first registered: July 8th, 2022 * Vehicle 2: KM reading: approx. 260,000 KM - first registered: 04/23/2018 * German vehicles - German vehicle registration documents - Vehicles immediately available & ready for use * The vehicle price is per vehicle - Sale is made on behalf of the customer - * Errors / misprints & prior sale reserved * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside - Please ask for exact location - ATTENTION -

Condition: good (used), Cap. 600 x 200 mm. Dkob Hljrx Skwjrtcsl With cooling and digital

Condition: as good as new (ex-display), Lorch turntable TURN 50 with counterpressure quill and control system Djb Hlrtoi Dtqfjcjkl

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm Dkjb Hlrteu Rt Syjcel 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Condition: used, shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Seco, shell end mills, indexable insert milling cutters SK50 -Type: R 215 16 50 049 058 09 Ø 49 mm Dsb Hovalvzelrtcskl -Dimensions: Ø 100 x 230 mm -Weight: 3.6 kg

Condition: excellent (used), operating hours: 1,400 h, FESX510S-34C-50 with only 1400hours runtime. Complete system with rigg, piping, cables, control, starter and motor. Very good condition. Dsb Hjuccu Selrtcekl

Year of construction: 1987, Condition: ready for operation (used), Working diameter: 95-150mm, rotational speed: 2250-6000/min. Dksbjmk Tape Hlrtcjl

Condition: new, -KOM 3039- Offered here are four-pole Nolta rotary toggles of type 50 30222. Dksb Hlrevw Ah Tetcsl Manufacturer: Nolta Available quantity: >5 pieces Type: 50 302225 Condition: New Plug pins: 3P+E Height: 87 mm Length: 285 mm Width: 90 mm Operation: rotary toggle Protection class: IP 45

Condition: used, Functionality: limited functionality, Year of construction: 2016, operating hours: 2,700 h, load capacity: 5,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: standard, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Condition: Not ready for use Technical condition: Poor Description: Rear axle defective Sideshift, 3rd valve, heating, full cabin, Dsb Hlrtsu Nn Uaecokl

Condition: used, Year of construction: 2023, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen Dkob Hljt U Sc Djrtcel column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: used, Air cooler, evaporator, cold store, refrigerated container, cold cell -Fan Diameter: 500mm -permitted Operating pressure: 8 bar -permitted Operating temperature: 100 °C -Pressure to minus temperature: 21 bar/ -60 °C -Content: 13.2 liters -Slat spacing: 7mm Dkob Hlsb Nx Hlortcol -Number: 2x cooler available -Price per piece -Dimensions: 1350/740/H700 mm -Weight: 174kg/pcs

Condition: new, Boring power 50,0 mm bore capacity in cast iron 60,0 mm bore stroke 230 mm thread dia. bis M 36 M table surface area 550 x 550 mm throat 400 mm turning speeds 54 - 1032 U/min morse taper MK 4 feed 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width 30 mm column diameter 200 mm engine output 4,0 kW weight 720 kg range L-W-H 600 x 1600 x 2450 mm Djb Hlsixmkzertcokl Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Year of construction: 2002, Condition: ready for operation (used), Max. speed: 360m/min, power: 5.6kW. Dkjb Hlrtegq Ux Njcol

Condition: used, Functionality: fully functional, machine/vehicle number: 515051017163, Year of construction: 2008, load capacity: 1,000 kg, lifting height: 3,000 mm, free lift: 1,460 mm, fuel type: electric, mast type: duplex, construction height: 2,070 mm, fork length: 790 mm, drive type: Elektro, Electric 3-wheel forklift Fahrgestellnummer: 515051017163 Mast type: Duplex Dksb Hlsuhxvcortcjl Condition: Ready for use and fully functional Technical condition: normal Battery Volt: 24V Battery Ah: 625Ah Battery year of construction: 2015 Description: Still RX 50-10 No.: R0375 Year of construction: 2008 The device is visually and technically in normal condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All sales of used goods are subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Sideshift, 3rd valve,

Condition: used, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 120 x 10 mm flat steel 200 x 20 mm hole diameter in sheet thickness 28 x 13 mm 50 t Dkjb Hevxw Iqelrtcol throat 250 mm weight of the machine ca. 1,45 t dimensions of the machine ca. 2,0 x 1,0 x 2,0 m With hole punching and notching device

Condition: used, drill diameter 3 - 50 mm Dkeb Hljrl U Nqertcol drilling length 500 mm lip angle 90 - 140 ° weight of the machine ca. 120 kg dimensions of the machine ca. 850 x 600 x 1300 mm

Condition: new, Year of construction: 2025, JOINT FORMING MACHINE Dsb Hlebyhniortcjkl Model; MAGRAF UH-50 -maximum width; 500mm -speed opretaion; up to 5 units per hour -input power:0,37 kW

Year of construction: 2017, Condition: ready for operation (used), Max. load: 50kg, min. pick up height: 700mm, max. dropping height: 1800mm, stroke: 1100mm, the machine was hardly used, with bottom plate and documentation, without spare parts. Dkeb Hsl I Ewfolrtcsl

Year of construction: 2000, Condition: used, pressure 230 t chamfer lenght 5000 mm distance between columns 4050 mm 800 mm 500 mm 300 mm 600 mm BC 45 Grafik 18,7 kW 22,0 t 6,0 x 2,2 x 3,75 m - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm Dsb Hloh Dxw Uortcskl - Groove in the front of the table - various tools

Year of construction: 2015, Condition: ready for operation (used), There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available. Dsb Hlrsk S Ehkstcokl

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t Dob Hen Ea Twelrtcskl dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Year of construction: 2004, Condition: ready for operation (used), Operational hours counter: ca. 14,000h. Dob Hleh Dw Tvsrtcskl

Year of construction: 1996, Condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Djb Hljhz Dyasrtcekl