Used Pegas Gonda 510 Topspeed for sale (3,024)

Condition: new, x-travel 1000 mm y-travel 300 mm z-travel 400 mm table-size 1320 x 360 mm spindle taper ISO 40 spindle turning speed range 58 - 1800 U/min Dkjb Esulbcns Imu Djl total power requirement 4 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,1 x 2,1 x 1,95 m

Condition: new, Year of construction: 2024, Functionality: fully functional, Technical data: • Hopper opening: 980x540mm • Dimensions: ca. 1750x1100x1700 mm • Hopper volume: ca. 0,7 m³ • Rotor diameter: Ø250mm • Rotor width: 500mm • Rotor speed: ca. 100U/min • Drive motor: 11kW • Noise level: 85dB(A) Lieferumfang: • Wood shredder with rotor • Cutters and counterknifes • Panel, ready wired, Siemens PLC Dsb Eouiuqxo Imu Djkl

Condition: refurbished (used), Year of construction: 2019, operating hours: 900 h, Functionality: fully functional, Handtmann FS510 forming system. With flow divider FST 546/8 8 lanes, belt and knife spraying and belt extension for grids or sheets. Currently equipped with forming die, (4x rectangular 25mm x 50mm) can also be converted to 8 forming tubes up to 60mm product diameter on customer request. The machine is as good as new from 2019 and was only used for a few product tests. Including new conveyor belt. Price includes 8 forming tubes or 1 forming die (assuming feasibility) according to customer requirements. It is not an EtherCat machine, therefore the FS can also be used with older VF's with PCK3 control. PCK4 and PCM VF8xx also work, but are not a requirement here. Voltage 200,220,240,400,480 or 575 Volt, 50/60 Hz Dsb E Imot Av R Isu Djkl

Condition: like new (used), Functionality: fully functional, Electronically controlled dowel hole drilling and driving machine BS 5102-V Condition: As good as new, newly painted, 1 year warranty. Dkebounvg To E Imu Del The BS 5102-V is the ideal machine for all face drilling. It can either drill or drive in dowels, but develops its full performance when both are done at the same time. The amount of glue can be precisely dosed via the PLC control, which ensures maximum flexibility and minimum set-up times. Equipment: Controlled X-axis with machine stand as workpiece support. X-support via linear guide and rack and pinion drive with servo motor. Including drilling motor, gluing device and dowel insertion device. Drilling depth and dowel projection can be adjusted directly on the drilling support. Safe workpiece clamping mechanism with a clamping portal, equipped with 4 adjustable clamping cylinders that press the workpiece precisely against the stop edge. Clamping cylinders can be controlled alternatively or together in two groups. Stop rulers are mounted on the left, right and center of the machine table to increase the workpiece support surface. Control system: PC with Siemens PLC control and dialog-oriented programming via WP-Studio. Windows 10 operating system with graphical support on a 17" color screen. Separate workpiece programs for left and right control panel, which can be automatically mirrored. Glue quantity specifications can be stored in each program. Technical data: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: min. 15 mm / max. 60 mm Vertical stroke of the support: 7.5 - 50 mm Min. lateral drilling distance: 10 mm Clamping cylinder: 4 short-stroke cylinders (63 mm Ø, inclined clamping) Drilling unit: 9,000 - 18,000 rpm, adjustable, 1.5 kW Drilling depth: max. 45 mm Drill holder: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min. Dowel dimensions: 8 x 30/50 standard, according to DIN 68150, form A Spiral feed capacity: 3.5 ltr. Glue system: 1:1 diaphragm pump, max. 7 bar Suction connection: 80 mm Ø, required suction air volume: 540 m³/h at 30 m/sec. Voltage: 400 V, 50 Hz options: Y-axis for automatic adjustment of the drilling and gluing unit. Electronic glue monitoring, which ensures that glue flows during the process. Additional drill motor for surface-side drilling. Technical data for surface-side drilling motor: Drill motor: 1.5 kW at 18,000 rpm, 1-spindle Speed: 9,000 - 18,000 rpm adjustable Drill feed: pneumatic Drilling stroke: max. 25 mm Drilling depth limitation: via spindle and siko display Distance to reference edge: min. 5 - max. 35 mm Drill holder: M10 external, max. diameter 35 mm Workpiece length: min. 70/90 mm (part width) This machine combines state-of-the-art technology with easy handling and high power reserves, ideal for demanding woodworking applications.

Condition: new, machine/vehicle number: 9126, Year of construction: 2024, load capacity: 1,000 kg, lifting height: 1,500 mm, fuel type: electric, construction height: 1,200 mm, Equipment: cabin, sideshift, Int. no.: 9126 Device details: Year of construction : 2024 Lifting capacity : 1000 kg Lifting height : 1500 mm Read operating hours : 0 h Mast type : None Dkeb E Ijtw An Rjmu Djl Mast height : 430 mm Length/width/height : 1510 / 680 / 1200 mm Operating weight : 340 kg Further equipment information: ---- The operating hours are generally measured hours. We will be happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We are happy to buy your OLD. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: new, Year of construction: 2022, Functionality: fully functional, Variable-speed IE3 screw compressor Technical data = see data sheet PDF. Dob E Imuoup Dwce Dekl

Condition: excellent (used), Year of construction: 2016, Manufacturer: DIECI Model: PEGASUS 60.16 Type: PLE Power: 96 kW Year of Manufacture: 2016 Dob E Imsvhcawsu Djkl Empty Weight: 16,660 kg Hydraulic System Pressure: 240 bar Maximum Manual Force: 400 N Maximum Wind Speed: 12.5 m/s Lateral Tilt: 1° Inclination: 1° Electrical System Voltage: 12 V CE Mark: Present Country of Origin: Italy

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, frequency: 50 Hz, Alfa laval CHPX510SGD-35CGRX separator complete system including engine Valve rig Control cabinet Starter cabinet Solids pump Cyclone Sludge tank Dkob E Isucct Iemu Dol Foundation plate Vibration damping feet Tools for bowl Compression tool Inert gas system Documentation Previosly used by alfa laval for training

Condition: new, overall weight: 3,500 kg, empty load weight: 1,050 kg, maximum load weight: 2,450 kg, loading space length: 366 mm, loading space width: 178 mm, loading space height: 183 mm, Year of construction: 2024, machine/vehicle number: 11650588, Special features Parabolic spring wheel suspension (leaf springs) Pressure-treated wooden plank panels with non-slip aluminum checker plate covering Split front access door Ramp with drive grille Further equipment Aluminum side walls Heat-reflecting roof Rear ramp suspension Aluminum ramp gate side ventilation flaps Lockable ball coupling Side ventilation flaps Spare wheel and holder 12v electrics 13-pin plug Miscellaneous COC / papers Registration papers Accessories available at extra cost Dkobetpac Ro E Imu Djl Removable front spoiler: 690 Euro Transverse separation: 640 Euro Drift grille extension :388 Euro

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, chuck outer diameter: 325 mm, through hole: 104 mm, construction height: 140 mm, rotational speed (max.): 4,200 rpm, 3 - Jaw chucks from SMW - Autoblock Chuck was incorrectly delivered with new machine and had to be replaced. When the machine was commissioned, only a turning test was carried out with the chuck. Absolutely as good as new! Dksb Esuqxu Sj Imu Dsl

Condition: good (used), It can weight from 12,5 up to 50kg. We have two 2507, one 2509 units besides this one. All are complete and in good working condition. Djb E Imjtnf Naju Dekl

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, working width: 1,000 mm, product height (max.): 35 mm, product height (min.): 10 mm, product length (max.): 2,500 mm, product length (min.): 290 mm, product width (max.): 1,000 mm, product width (min.): 230 mm, TECHNICAL DETAILS Working width: 1,000 mm Feed speed: 8 - 40 m/min Control system: IMATRONIC 152 manufactured product Product: Box furniture, sides + bottoms, 4-sided edging and sizing Product length: 290 - 2500 mm Product width: 230 - 1000 mm Product thickness: 10 / 35 mm Product speed: 60 m/min Min. strip length (roll material): approx. 300 mm Min. strip height (roll material): approx. 14 mm Max. Strip thickness (roll material): approx. 3.0 mm Min. workpiece length: approx. 150 mm Min. workpiece thickness: approx. 10 mm Max. Workpiece thickness: approx. 45 mm Max. Workpiece size: approx. 35 mm (temporarily possible) Workpiece distance and width Min. workpiece projection from chain track, per side: approx. 35 mm (plus edge thickness) Max. Workpiece projection from chain conveyor, per side: approx. 80 mm Min. throughfeed width with workpiece projection 35 mm: approx. 230 mm MACHINE DETAILS Mains voltage: 2 × 400 V Control voltage: 24 V Design: Left-hand machine, stop side left EQUIPMENT AND AGGREGATES - Feeding device: With three inclined, rubberized rollers, can be folded up by hand. - Pneumatic pressure rollers: For lateral pressure, controllable. - Metal detector: 2 pieces, detection of small metal parts in the edge area. Detection width 80 mm, workpiece height: 30 mm, workpiece projection 10 - 90 mm - Cutting units: Double cutting units with vertical adjustment and 4.4/6.6 kW motor power. 6000 rpm, tool diameter 200 - 250 mm - Routing/profiling units: Swivel routing units with height sensing and mechanical digital readouts. 6000 rpm - Hot melt adhesive feeder (654232): QuickMelt with 2.5 kW heating power and 50 kg granulate tank. Melting capacity 10 - 12 kg/h - Milling units: For rough and fine milling with 6.6-8.0 kW motors and digital control. - Cross-cut unit: cross-cut height 50 mm, cross-cut thickness 2.5 mm, edge 30 m/min, 2 HM cross-cut saw blades 160 x 22 mm - Trimming unit for rough trimming: 2 x 1000 W, 12,000 rpm, with height sensing, side sensing - Trimming unit for fine trimming: 2 x 150 W, 12,000 rpm, with height sensing, side sensing - Trimming unit for profile trimming: 2 x 600 W, 18,000 rpm, with height sensing, side sensing - Profile scraper units: For subsequent smoothing and polishing of profiles. - Scraper unit: Removal of hot-melt adhesive residue from the edge area - Buffing units: For polishing PVC edgeband profiles. Dksb E Imueu Ttp Us Del - Smoothing units: For smoothing and rounding off profiles. - and more - see PDF \/

Condition: excellent (used), Year of construction: 2019, operating hours: 1,020 h, machine/vehicle number: MA0012_SN938086, RENNER RSK-B 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer The new compressor is in stock and available immediately Pressure: 10 bar Dksb E Imed Sw Ncou Dol Rated power: 7.5 kW Delivery quantity: 1.02 m³ / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1031 x 572 x 721 mm Weight: 225 kg Operating hours: 1020 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2023, Condition: new, The workline 510.350 DGH is a semi-automatic double mitre bandsaw in swivel frame design. Equipment details: - Double mitre 30° - 45° - 90° - 45° - 30°. - Hydraulic full stroke vice - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3kW - Simple, easy to understand control system - Control panel in ergonomic position - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: - Microspraying device - Hydraulic belt tension indicator Dksb E Imuehg Nvys Dol

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, total length: 1,200 mm, total width: 800 mm, total height: 1,600 mm, For sale seam sealing machine from Orion. Price for one piece, 4 pieces for sale. Djb Eeumatzo Imu Dekl

Condition: excellent (used), Year of construction: 2011, Buderus GE315 boiler Output: 105Kw Year: 2011 Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. Djb Estu Ub Se Imu Dokl The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: good (used), Year of construction: 2004, Used Bosch SVE 2510 vffs packaging machine with Ishida 14-head weigher ( from 2001) and Markem Imaje Dkeb E Imenwplpeu Dsl SmartDate X40 coder. All machines are in good, working condition. Max bag width is 250mm. The equipment was used by Mondelez, packing snacks. Machine speed is 200 bpm. The weigher can be bought separately. Alone it is 19500 euros.

Condition: used, mileage: 449,000 km, first registration: 06/2020, fuel type: diesel, gearing type: automatic, emission class: euro6, Equipment: air conditioning, spoiler, Road tractor, automatic transmission, intarder, 449,000 km, side skirts, spoiler, air conditioning, rear air suspension Dsbevllktj E Imu Dskl Price indicated above plus 22% VAT + transfer of ownership

Condition: like new (used), Year of construction: 2018, operating hours: 45 h, machine/vehicle number: MA0003_SN807103, Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany The compressor is in very good condition with 45 operating hour. Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Dkob E Imjdulwnsu Dsl Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 45 Bh Warranty: 6 months from date of purchase

Year of construction: 2016, Condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Dsb E Iegwlrdemu Dekl Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: new, Year of construction: 2024, Functionality: fully functional, turning diameter over cross slide: 300 mm, turning diameter: 738 mm, turning diameter over bed slide: 510 mm, turning diameter over top slide: 300 mm, total length: 2,900 mm, total width: 1,120 mm, total height: 1,430 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 300 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, overall weight: 2,335 kg, MACHINE READY FOR IMMEDIATE PICKUP!!! EUROMET VD510X1500 universal lathe is designed for use in manufacturing plants, tool shops and maintenance departments. Distinguishing features of the construction are: one-piece base made as cast iron, hardened bed guides, tempered spindle end. The lathe allows machining of a full range of threads, it also has a feed lock: through a screw or with a shaft, a removable bridge, infinitely adjustable spindle speed with the possibility of setting a constant cutting speed. An innovative solution in VD series lathes is the use of an inverter for infinitely adjustable spindle speed (2 ranges; low and high revolutions) cooperating with a controller, which allows programming a constant cutting speed. Standard equipment: 3-jaw lathe chuck 250mm 4-jaw lathe chuck 300mm driver disc fixed support movable support thread indicator reduction sleeve MT 6/4 fixed tang MT 4 digital readouts for 3 axes constant cutting speed controller stepless spindle speed control cooling system taper ruler illumination English language user manual CE declaration of conformity Optional equipment (additional fee): quick-change imager Technical data: Max. turning diameter over bed: 510 mm Max. turning diameter over the slide: 300 mm Max. turning diameter over bridge: 738 mm Max. turning length: 1500 mm Bed width: 350 mm Spindle clearance: 80 mm Bridge turning length: 245 mm Top sledge travel: 130 mm Spindle end: D1-8 Spindle socket: Morse 7 Spindle speed range: 25 - 1600 rpm Maximum tool dimensions: 25x25 mm Longitudinal feed range: 0.059 - 1.646 mm/rev Transverse travel: 326 mm Transverse travel range: 0.02 - 0.573 mm/rev Metric threads: 0.2 - 14 mm Inch threads: 2-112 T.P.I. Modular thread: 0.1-7 M.P. Dkebsu Ibmye E Imu Dsl D.P. threads: 4-112 D.P. Tailstock bushing diameter: 75 mm Extension of tailstock bushing: 180 mm End of tailstock bushing: No.5 Morse Motor power: 7.5 kW Coolant pump power: 0.1 kW Top slide travel: 170 mm Dimensions: 2900x1120x1430 mm Weight: 2335 kg

Condition: new, wheelbase: 5,530 mm, gearing type: mechanical, Year of construction: 2023, = Additional options and accessories = Dkob E Imuouxp U He Del - Central lock - Fog lights - Powered windows = Remarks = Model description: HINO FG – 1625 10.3 Ton 4×2 Single Cab with bed space, MY23 500 Series Code Diesel Max Output: 245 PS @ 2,500 RPM Max Torque: 726 N.m. @ 1,500 RPM Displacement: 7,684 cc Final Gear Ratio: 6.428 Shipping Dimension: 9,485 x 2,490 x 2,745 mm (LxWxH) Cabin Width: 2,490 mm Rear Overhang: 2,675 mm Rear Axle Width: 2,440 mm Front Tread: 2,050 mm Rear Tread: 1,835 mm Cab to End Frame: 7,185 mm Ground Clearance: 255 mm Rear Chassis Height: 1,060 mm Front Kerb Weight: 3,245 kg Rear Kerb Weight: 2,470 kg Front Axle Weight: 6,500 kg Rear Axle Weight: 10,000 kg Alternator: 24V - 50A Frame Width: 840 mm Frame Section: 277x80x8.0 mm Parking Brake: Spring Brake Exhaust Brake: Yes Service Brake: Full air dual circuit Tyre: Tubeless Rim Size: 20 x 7.50 = More information = Empty weight: 5.710 kg Carrying capacity: 10.290 kg GVW: 16.000 kg Height: 333 cm Fuel tank: 200 litres Gearbox model: MX06

Condition: ready for operation (used), Ishida X-Ray Inspection System w/ Ishida Digital Automatic Checking System and Ishida Check Weigher, Model# IX-GA-65100-A, Serial# 79205, Single Phase, 230V, 50/60 Hz Deb E Imujt Eld No Djkl

Year of construction: 2024, operating hours: 250 h, Condition: as good as new (ex-display), Functionality: fully functional, Model: Lepton 5100 Demonstration machine Year of construction: 2024 Operating hours: approx. 250 hours Location: D 84069 Schierling Availability: short term Equipment: -Basic machine Lepton 5100 with screening deck 1 and 2 Dkob E Ijvkfbpsmu Dsl pre-screen deck with long hopper and dosing roller variably adjustable -Volume measurement via the load -Wind sifter screen deck 2 with nozzle, suction turbine and hose -Preparation for SD 1 wind sifter -Compressor -Water spray system -Remote control for all important settings via radio Diesel-electric drive Tir 4 Final -Plug-in option for connection to external power source (renewable energies) -Level compensation axles -Double axle 80 km/h approval -19,000 kg total weight -Transport dimensions: 11.97m overall length, 3.98m height, 2.53m width, no special permit required Other: Good used condition, fully operational

Condition: good (used), Year of construction: 1985, Functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), shaft axis: 500 mm, 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Dob E Iervg N Domu Dokl Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z