Used Pegas Gonda 290X290 X-Cnc-Lr-1500-F for sale (58,553)

Condition: good (used), Year of construction: 1994, bending angle: 190 °, bending radius: 700 mm, overall weight: 3,300 kg, wall thickness: 11 mm, - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Pipe Ø 48.3 mm; radius 105 mm Pipe Ø 60.3 mm; radius 120 mm Pipe Ø 63.5 mm; radius 150 mm Pipe Ø 76.1 mm; radius 190 mm Pipe Ø 88.9 mm; radius 222 mm Pipe Ø 114.3 mm; radius 285 mm Pipe Ø 139.7 mm; radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe diameter 168.3 mm; radius 420 mm There were a few mandrels with a marking directly engraved on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outer diameters of the mandrels were measured: Djb Hswhdrmsdyb Hekl 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000

Condition: ready for operation (used), Year of construction: 2004, Functionality: limited functionality, machine/vehicle number: C 63092, power: 11 kW (14.96 HP), input current: 26 A, Used until the very end. Replacing small parts, adjusting Dkjb Hjwh S A Hsdyb Hol

Condition: used, color: red, Year of construction: 2013, Year of manufacture: 2013 GVW: 47.000 kg Extendable superstructure: Yes Faymonville F-S42-1ACA. Year: 2013. 12 tons SAF axles. Max weight: 47.000 kg. Kingpin load: 23.000 kg. EBA ABS ALB. Hydraulic works on NATO. Hydr. detachable gooseneck. Allu boards on neck. 3.9 meter extandable. Airsuspension. Powersteering. Central greasing system. Hydraulic ramps: - lenght: 2750 mm. Excavator bridge: 3200x700 mm. Dimmensions: Neck: L: 4000 mm. W: 2500 mm. H: 1550 mm. Kingpin height: 1200 mm. Floor: L: 6700 mm (2 x detachable betweentable) W: 2550 mm. Dkeb Hdyewgxyvsb Hel H: 150 - 300 mm. Backside trailer: L: 3200 mm. W: 2550 mm. H: 900 mm. Tyres: 245/70R17,5 60%. ID NR: 446. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2021, For sale industrial spinning machine for forming bowls, cones, etc. In very good technical condition, ready to work. Ideal for metalworking, both in small plants and in larger production lines. Technical specifications: Deb Hdjwhxn Ajyb Hokl Height of the centre above the bed: 500 mm Distance between centres: 1200 mm Chuck clutch: Size 6 (DIN 55027) Longitudinal stroke: 600 mm Cross stroke: 400 mm Longitudinal/cross force: 40 kN Maximum tailstock force: 20 kN Tailstock stroke: 400 mm Maximum longitudinal/cross feed speed: 15 m/min Spindle speed: 0–3000 rpm Main motor power: 30.5 kW Hydraulic unit motor power: 5.5 kW Power supply: 400 V / 50 Hz or 480 V / 60 Hz Maximum workpiece thicknesses materials: Aluminum: 7 mm Steel St. 37: 5 mm Stainless steel: 3 mm The machine is fully functional, can be started and tested on site. Perfect for precise shaping of sheets of various thicknesses

Condition: new, Year of construction: 2024, fuel type: diesel, power: 74 kW (100.61 HP), fork length: 1,200 mm, color: red, Lifting capacity: 4,000 kg. Maximum lifting height: 17,550 mtr. Maximum forward reach: 13,080 mtr. Unloading weight: 12,560 kg Forks: 1,200 mm. Controls: JSM Joystick Only for export outside EU. Dkob Hsvz Uckjdyb Hsl = More information = Gearbox: Torque Converter Year of manufacture: 2024 Purpose: Internal logistics Lifting capacity: 4,000 kg

Condition: good (used), Year of construction: 2007, - SIEMENS 849 D control unit - Bar capacity 65 mm - Main and counter spindle with speed 5,000 1/min - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Speed of driven tools 4,000 1/min TRAVEL X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm Djb Hdjuw Izvoyb Hekl X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Dob Hjwhddvodyb Hokl Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device

Year of construction: 2007, Condition: ready for operation (used), Workpiece Workpiece X 930 mm Workpiece Y 320 mm Workpiece Z 190 mm Dksb Hdyewdza Hob Hel This KRÜSI KM-95 G1 was manufactured in 2007. A CNC Wood Machining Centre, it is ideal for a variety of woodworking applications. Consider the opportunity to buy this KRÜSI KM-95 G1 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Pallet table Industrial table for depositing manufactured parts 1200 x 850 mm Dksb Hdyjnk Tvbeb Hel height 300 mm several tables in stock

Condition: used, color: red, Year of construction: 2020, Year of manufacture: 2020 GVW: 61.000 kg Extendable superstructure: Yes Faymonville F-S43-1AAF. Year: 2020. 12 Tons SAF axles. Max weight: 61.000 kg. Kingpin load: 25.000 kg. Powersteering 3 steering axles. Hydraulic works on NATO. EBS ABS ALB. 2 x extandable: 1: 8.15 meter. 2: 8.45 meter. Total 16.5 meter! Toolbox + Allu boards on gooseneck. 2 x 25 cm widened. Radio remote Control. Sparetyre. Hydr. suspension (left and right seperate). Central greasing system. Zink coated. Extra betweentable: 50 cm. 2 way hydraulic ramps: - Lenght: 2800 mm + 1400 mm. Dsb Hdybswgwv Aj Hokl - Hydraulic from left to right. Dimmensions: Neck: L: 3650 mm. W: 2550 mm. H: 1550 mm. Kingpin height: 1300 mm. Floor: L: 12.000 mm. W: 2550 mm. H: 950 mm. Tyres: 245/70R17,5 80%. Topcondition! ID NR: 601. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Dsb Hdyovaatfeb Hskl Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, CNC Machining centre with 4 controlled axes FOM INDUSTRIE DALI 70 Year: 2015 Condition: excellent, as new (completely renewed) Configuration: - Electrospindle 6,5 kW, 19,000 rpm (ISO30) - 7+3 tool magazine on head (ISO30) - No. 8 vices with independent positioning - Left and right pneumatic reference stop - Dual station machining on two working areas - Module for graphic designing in 3D for FOMCAM - Module for insertion of geometries 'defined by the user' and import of drawings in DXF format for FOMCAM - Data import software in accordance to FOM protocol and wireless optical bar code reader Deb Hjwhrlzodyb Hekl - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system - Chip conveyor - Mobile control consolle with PC, 24'' monitor, keyboad and mouse - Tool set A3 / ISO30 - Cone with horizontal disc Ø 200 mm

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Dkeb Hdswhddijyb Hjl Additional information - Specification - Back stop - Roll shelf

Condition: good (used), Year of construction: 2014, PCS-G Off Press Controls S Type Straight Machine Dob Hdoudltgeyb Hokl Ryobimatic AAC Dampening Palletfeeder RPC Semi Automatic Plate Change Grafix: Powder Sprayer High Pile Delivery Technotrans Alpha C. Refrigeration Panasonic LED UV Kurutucu (Delivery) Automatic Blanket Washing Device Combi Rollers in all Units Densitometer Intellitrax Automatic Paper Size Adjustment Automatic Paper Thickness Adjustment Impression Account: 90 Mio.

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock Dksb Hdyshuil Rob Hel -Tank -pump -Filter

Condition: used, color: blue, Year of construction: 2017, Year of manufacture: 2017 Empty weight: 12.110 kg Carrying capacity: 25.890 kg GVW: 38.000 kg Extendable superstructure: Yes Faymonville F-S42-1ACA. Year: 2017. 11.2 Tons SAF axles. Weight: 12.110 kg. Load capacity: 25.890 kg. Max weight: 38.000 kg. Kingpin load: 18.000 kg. EBS ABS ALB. Hydraulic from trailer works on NATO. Hydraulic detachable goosneck. Airsuspension. Sparetyre. Powersteering. Radio Remote Control. Dkobewgwrwo Hdyb Hol 5 Meter extandable spinbed-baggerbed. Dimmensions: Neck: L: 4000 mm. W: 2550 mm. H: 1550 mm. Kingpin height: 1200 mm. Floor: L: 6300 mm. W: 1000 - 2540 - 3000 mm. H: 450 mm. Thickness floor: 300 mm. Backside trailer: L: 2800 mm. W: 2550 mm. H: 950 mm. Tyres: 235/75R17,5 80%. 2 Pieces avialable! German Trailer! ID NR: 596. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Year of construction: 2003, sheet thickness: 6messurements (LxWxH): 900 x 900 x 1150weight approx.: 850 Dksb Hdybsv Ncn Ro Hsl

Year of construction: 2024, Condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) Dob Hdyehlkqpob Hskl - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Dksb Hdewhb R Hsyb Hol Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 2018, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Independent Z-axes: 2 HOMAG Split-Head: Yes Number of milling spindles: 1 Dksb Hjvg Riqodyb Hel Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 12 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Outfeed: Workpiece return Dowel insertion: Yes Glue system: PVAc Safety device: enclosed cabin Control: Homag powerTouch HOMAG - Uninterruptible power supply: Yes HOMAG Plausibility check: Yes Control cabinet cooling: Yes Software: HOMAG WOODWOP 7.1 Conformity marking: CE mark

Year of construction: 1995, Condition: good (used), travels: x=1600mm Y=800mm Z=900mm spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of z axis present but defective. Dob Hdoh Nuhreyb Hskl

Condition: used, mileage: 150 km, power: 353 kW (479.95 HP), gearing type: automatic, fuel type: diesel, overall weight: 32,000 kg, empty load weight: 17,300 kg, maximum load weight: 14,700 kg, tire size: -, axle configuration: 8x4, first registration: 01/1900, emission class: euro6, brakes: intarder, suspension: air, Year of construction: 1900, wheelbase: 4,500 mm, Equipment: air conditioning, crane, differential lock, navigation system, onboard computer, * INTARDER * PALFINGER EPSILON Q170Z crane * 2 hydraulic extensions * Rotator + grab bucket * 1520 kg at 9 m * Man-standing station * Radio control * 21T PALFINGER articulated boom * Bucket capacity from 4.40 m to 6.40 m * Hydraulic intakes * Hydraulic rear axle * Air springs * Aluminum fenders * 290 L diesel tank * Wheelbase 4500 mm * GPS * Bluetooth * Air conditioning * Cruise control and speed limiter Boom brand: PALFINGER Tire information: MICHELIN 13R22.5 Differential lock Bluetooth Air conditioning Air conditioning type: Automatic air conditioning Central locking GPS Rotating beacon On-board computer Power take-off Cruise control Speed Heated electric mirrors Suspension seat Djb Hjwg Hywsdyb Hjkl Telephone Sunroof Hydraulic retarder Crane Loader crane brand: PALFINGER Loader crane model: EPSILON Q170Z Power: 480 DIN hp Manufacturer Condition: New Power: 353 kW

Condition: excellent (used), Functionality: fully functional, input voltage: 400 V, Bread mill Rising flour machine Grinding machine Fomko model: F 500 capacity h / 300 kg Connection 400V, 1,5 kW, 16A-CEE plug Dimensions: 550 x 550 x 1100mm, WxDxH Used machine We carry a large selection of bakery machines! Djbst D Tpkj Hdyb Hskl

Year of construction: 2025, Condition: new, XX100292 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm Deb Hdybsiv Imno Hskl - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: good (used), Year of construction: 1989, spindle speed (max.): 900 rpm, spindle speed (min.): 250 rpm, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 190 mm, grinding wheel diameter: 200 mm, overall weight: 2,000 kg, rotational speed (min.): 3,000 rpm, Workpiece diameter max.: 320 mm Max. workpiece length between the tips: 400 mm Longitudinal movement (X-axis): 400 mm Vertical movement (Y-axis): 250 mm Transverse movement (Z-axis): 190 mm Sanding head, swivels around the vertical axis: 360° Sanding head swivels around the vertical axis: 220° Max. grinding wheel diameter: 200 mm Grinding spindle diameter max.: 70 mm Speeds (pole-changing): 3000 - 6000 min^-1 | 4500 - 9000 min^-1 Drive power (pole-changing): 2.4 / 3.0 kW Center height / with intermediate plate: 165 mm Workpiece holder: ISO 50 Dkjb Hdybswhbr Re Hjl Tailstock taper: MK 3 Total weight of machine: 1605 kg Total weight of switch cabinet: 310 kg Connected load: 12 kVA Comprehensive technical documentation is available.