Used Pegas Gonda 290X290 A-Cnc-F for sale (14,501)

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36 Csljwfxkrjn T Snisgt

Condition: used, Year of construction: 2016, swing diameter 560 mm turning length 1.400 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° spindle head 6 DIN 55026/55021 ISO 702/1 bar capacity 65 mm spindle diameter in front bearing 110 mm Csln T Snowb Hx Asiegt turning speed range - spindle ~ 5.000 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C - Axis 0,001 ° Number of Turrets 3 turret (x-stations) 3 x 12 pos number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 9,4 kW Torque 19 Nm travel -x axis 140 mm travel -z axis 1.375 mm rapid traverse X-axis 22,5 m/min rapid traverse Z-axis 45 m/min feed power X/Z: 9.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N tool taper 30 x 55 mm DIN 69880 total power requirement 108 kVA weight of the machine ca. 14 t dimensions of the machine ca. 8,0 x 2,6 x 2,5 m CNC Turning- and Milling Center INDEX G 250 - INDEX WHD 200/14 Workpiece Handling System Chuck parts max. 200 mm in diameter Length up to approx. 200 mm Shaft parts max. 80 mm in diameter Length up to approx. 400 mm Workpiece weight max. 2x 10 kg Max. workpiece projection: 150 mm (at 10 kg) Two-jaw double gripper for blanks and finished parts Longitudinal gripper travel Z: max. 5,200 mm Gripping stroke Y: max. 300 mm Electric rotation axis 23 degrees Electric gripper rotation angle horizontal axis 4x 90 degrees Double gripper travel per gripper jaw 20 mm - Schnaithmann Pallet Handling System (Type BS) 20x workpiece carriers 240 x 200 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Cgoln T Snewhi Srsijt Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder Cgsln Tsq Npqms Sniet 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Cgoln Towcfgbj Sniot Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, turning length: 1,200 mm, turning diameter over cross slide: 350 mm, turning diameter: 350 mm, spindle motor power: 24,000 W, spindle speed (max.): 5,700 rpm, spindle bore: 120 mm, travel distance X-axis: 200 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 20,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Control: Siemens SINUMERIK 840D sl DSG-Filter RBF700_500, Industriefilter M 1600 EC, and IF-Vario M 1600 EC. Includes a bin/crate of extra spindles, 4 additional live tooling units, and other spare parts. Cgeln Tswa Ttws Snijt

Condition: used, machine/vehicle number: 006095, X axis working area: 3130 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Coln T Snsiiq Tfeiegt Total number of drilling spindles: 18 Total number of tool changer positions: 8

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter: 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Cjlnertrlzj T Snijgt Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Cslev Nw Npen T Snisgt Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), SPİNDLE HOLE DİA 1.3" POWER 7.5 hp RPM 8,500 RPM # AXİS 8 CONTROL CNC (FANUC 32i-B Plus) Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Cgsln Tsrbl N Eo Snist Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Tool carrier 1: X1/Y1 travel mm | in 70/405 | 2.76/15.94 Counter spindle: X2/Z2 travel mm | in 300/200 | 11.81/7.87 Tool carrier 2: Y2 travel mm | in 135 | 5.31 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Maximum speed rpm 4,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 5.25/4.5 | 3.9/3.3 Tool holder on slide Y2 On station for back working Fixed/driven tools for back-working 4/4 (5/4)* Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Tool holder on slide 2 Fixed/driven tools for back-working 2/0 (0/2)* (0/1 for polygons)* Maximum speed rpm 4,250 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Machine Footprint m² | ft² 2.8 | 30.1 Machine height mm | in 2.085 | 82.09 Machine weight (including coolant tank) kg | lbs 3,550 | 7,826 Control system DMG MORI SLIMline Control with 10.4″ monitor FANUC 32i Automatic turning with 6 linear axes and 2 C-axis Main spindle with 8,500 rpm, 29.8 ft lb, 7.4 hp Counter spindle with 8,500 rpm, 10.3 ft lb, 3 hp Total of 41 tool stations 8 driven tool stations as standard Driven tools spindles 6,000 rpm, 2.2 ft lb, 1.3 hp Control panel with 10.4" color display and FANUC 32i-B Plus 2 control channels, 6 linear axes and 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously EQUIPPED WITH: Patriot 338 Edge Bar Feed Sliding Headstock Belt Type Chip Conveyor

Condition: used, machine/vehicle number: 006067, X axis working area: 3050 mm Y axis working area: 850 mm Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4 Cjln Tjiiirlj Snisgt

Year of construction: 2018, Condition: like new (used), Available because of excess capacity, this machine is in incredible condition and can ship immediately anywhere in the world. Please inquire with us for a price Ex Works, FOB, or CIF. Celn Tsnkdtne Sniegt

Condition: excellent (used), Year of construction: 2022, Doosan DBM 2030 Coln T Snov Iq Hfsiogt Bridge Mill Double Column and Bridge Type Machining Center Installed 2022 Control: Fanuc 31i-B, 15" Screen Contact us for specifications

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Coln T Snon Rzcpeijgt Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, controller model: 31Ia, total height: 2,920 mm, total length: 2,870 mm, total width: 2,590 mm, overall weight: 7,250 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 20,000 rpm, Equipped with: 31ia Fanuc Control 4th/5th Axis 20,000 RPM Spindle (30) ATC Coolant System Chip Blaster High Pressure Coolant Chiller LNS Chip Conveyor Cgeln T Sertrw Toniet Specifications: Table Work Surface Area: 49.61″ x 23.62″ Max. Workpiece Weight Loadable on Table: 2646 lbs Travel on X-Axis（Table right/left): 41.34″ Travel on Y-axis（Saddle back/forth): 20.87″ Travel on Z-axis（Spindle head up/down): 20.08″ Distance From Table Top Surface to Spindle Nose: 5.91″ – 25.98″ Distance From Column Front to Spindle Center: 24.25″ Distance From Floor to Table Work Surface: 35.43″ Spindle Speed: 100 – 20,000 RPM Number of Spindle Speeds: (Electric): 2 Steps Spindle Nose:（nominal number): No. 40 Type of Tool shank: CAT40 Number of stored tools: 30 ATC

Condition: excellent (used), Year of construction: 2020, Doosan Puma TT2100SYY Mfd. 2020 Tooled as pictured Bar feed: FMB Turbo 565 (12ft) Mfd. 2019 Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM MP SYSTEMS 1000 PSI HIGH PRESSURE COOLANT Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING SPECIFICATIONS: Machining Length     27.38" Cjln Tovniakj Snisgt

Condition: used, machine/vehicle number: 007836, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Cgjlsv Ncnwen T Sniet Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 6

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Cgelnovnf Rfj T Snist Run less than one shift Cut Steel Standard tooling included

Condition: used, machine/vehicle number: 007851, X axis working area: 1200 mm Y axis working area: 2500 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Cgjln T Sewayl Toniet Total number of tool changer positions: 14

Year of construction: 2011, Condition: good (used), ZPS TMZ 867 CNC Multi-Spindle SN: V867A0040 Mfd. 2011 Siemens Control PRA 100F Type: 42  With Riedel Chiller Absolent Mist Collector High Pressure Coolant Filtration system Fire Suppression System Pickup Attachment IEMCA PRA 100 Bar Loader Stock Reel and Stand Cgeln T Snsk Nb Tgeist Slide Pos. 3:  X- Y- Z-Axes (with Motor) Slide Pos. 5: X- Y- Z-Axes (With Motor) Slide Pos. 8: X- Y-Axes (to get proper center height)

Condition: used, machine/vehicle number: 007699, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Cgjln T Snevap Eksiot Operating Units: 9 nr

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Celn T Snsg E Th Ssisgt Max. panel length: 1500 mm No of Top Units: 2 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Csln T Sehwi U Toniogt Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13 Coln T Snoum H Ekoiogt

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Coleu Huwcsn T Snisgt Max. panel length: 2400 mm Movement system: suction cups.