Used Pegas Gonda 240X280 A-Cnc-F for sale (14,136)

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar Bdedpfexxwxfsx Adujk - X-axis travel: 1020 mm - Y-axis travel: 830 mm - Z-axis travel: 240 mm - X and Y travel limited by tool changer: 1020/720 mm - Gantry clearance: 200 mm - Bushing distance: 100/100 - Table cut-out width/depth: 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm - Recorded machine operating hours: 4951 h - Spindle running time: 2803 h The machine is equipped with a tool presetting device from manufacturer SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. FCA D-01237 Dresden – loaded on truck

Condition: used, Year of construction: 2019, functionality: fully functional, OPTIMUM - OPTImill F 105 CNC Offer Details Stock number: 1039-8705 Machine type: Machining center - Vertical Manufacturer: OPTIMUM Model: OPTImill F 105 CNC Year of manufacture: 2019 Control: Sinumerik 808D adv. Siemens Location: D-59302 Oelde, Germany Country of origin: - Availability: immediately Delivery terms: ex works Additional information: CNC vertical machining center OPTIMUM - OPTImill F 105 CNC - DEMONSTRATION MACHINE Technical Details Travel X-axis: 550 mm Travel Y-axis: 305 mm Travel Z-axis: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle: Speed range - main spindle: 10 – 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable: Clamping area: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 – 600 mm Tool changer: Number of tool stations: 12 positions Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feedrates: Bdedpfx Adexvx Sneuok Rapid traverse (X / Y / Z): 10 m/min Feed speed: up to 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm Total power requirement: 15 kVA Machine weight approx.: 2.9 t Space requirements approx.: 3.5 x 2.5 x 2.4 m Included Accessories Documentation Chip conveyor system Coolant system Tool changer Probe: RENISHAW - Primo

Condition: excellent (used), mileage: 516,000 km, power: 265 kW (360.30 HP), first registration: 06/2016, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, wheelbase: 4,900 mm, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, Equipment: air conditioning, crane, low noise, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Brake booster - Electric windows Bdjdpfx Adsxyy R Teuek - Speed limiter - Air suspension - Radio/CD player - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Central locking - Towing jaw = Further information = Front axle: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Air suspension Crane: FASSI F 175 a 24, mounted behind the cab Superstructure brand: JOAB Pump: Yes Technical condition: very good Optical condition: very good

Condition: used, turning length 4000 mm turning diameter over bed 1000 mm turning diameter over cross slideways 900 mm centre height 1090 mm control SIEMENS 810D max. workpiece weight 1500 kg Rotating speeds 1000 U/min bed width 355 mm Bedpfx Adjxukvpjuodk max. workpiece weight 3000 kg dia. of quill 180 mm spindle passage 155 mm engine output 40 kW weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m GURUTZPE A-1200 G4 CNC lathe with milling and grinding equipment

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: A98908136P322180001, overall weight: 130 kg, total length: 800 mm, total width: 440 mm, total height: 620 mm, volume flow: 124 m³/h, final pressure: 16 bar, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 6 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,450 rpm, delivery head: 7,000 mm, The heating pump TP 125-80/4... is brand new from the factory. The pump is still in its original packaging. The appropriate documentation is included with the pump. Bsdpfexywmfsx Adusdk

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm Bsdpfx Asww Nb Sjduodk total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE

Condition: excellent (used), Year of construction: 2014, operating hours: 11,200 h, functionality: fully functional, spindle motor power: 28 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, type of input current: three-phase, torque: 479 Nm, workpiece weight (max.): 5,700 kg, total height: 3,155 mm, total length: 6,760 mm, total width: 4,060 mm, overall weight: 15,500 kg, tool length: 250 mm, Equipment: documentation/manual, Soraluce TAA25 milling machine from 2014 with HEIDENHAIN TNC530 CNC. In 2024: hydraulic unit replaced and complete retrofit of head and spindle. Travels X/Y/Z [mm]: 2,500 x 1,000 x 1,000. Table [mm]: 2,700 x 850. Head indexing [°]: 2.5 x 2.5. Spindle speed [rpm]: 4,000. Power and torque [kW - Nm] S1: 28 - 479. Tool magazine: 20 positions – ISO 50. Bsdpfxjxwna Rj Aduodk

Condition: excellent (used), Year of construction: 2011, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Bdsdewcd S Nopfx Aduek Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) Bdjdpfx Asxraimsduok (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: like new (used), Single-stage centrifugal volute in-line single-head pump: -wear rings made of bronze -cataphoresis treatment -stable sleeve coupling -top-pull-out principle for easy maintenance -optimized hydraulics -in-line design with opposite suction and discharge ports enabling mounting in pipework or on a concrete foundation -corrosion resistant maintenance-free mechanical shaft seal. Pump speed on which pump data are based 2910 rpm Rated flow 94.5 m³/h Rated head 20.3 m Maximum head 240 dm Actual impeller diameter 137 mm Primary shaft seal BQQE Code for shaft seal BQQE Curve tolerance ISO9906:2012 3B2 Pump version A Materials Pump housing Cast iron EN-GJL-250 ASTM class 35 Impeller Cast iron EN-GJL-200 ASTM class 30 Material code A Installation Range of ambient temperature -30 .. 60 °C Maximum operating pressure 16 bar Max pressure at stated temp 16 bar / 120 °C Pipe connection standard EN 1092-2 Type of connection DIN Size of connection DN 100 Pressure rating for connection PN 16 Port-to-port length 500 mm Flange size for motor FF265 Connect code F Liquid Pumped liquid Water Liquid temperature range -25 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type 132SB Bjdpexx T Euofx Adusdk Rated power - P2 7.5 kW Mains frequency 50 Hz Rated voltage 3 x 380-420D/660-725Y V Rated current 14,4-13,6/8,30- A Starting current 760 % Cos phi - power factor 0.9 Rated speed 2900 rpm IE efficiency IE2 88,4% IE Efficiency class IE2 Motor efficiency at full load 88.4 % Motor efficiency at 3/4 load 89.6 % Motor efficiency at 1/2 load 88.8 % Number of poles 2 Enclosure class (IEC 34-5) 55 (Protect. water jets/dust) Insulation class (IEC 85) F Built-in motor protection PTC Motor No M3N15222 Controls Frequency converter None Others Minimum efficiency index, MEI ≥ 0.58 Net weight 133 kg Gross weight 160 kg Shipping volume 0.4 m³

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Bsdpfxoi D Iqke Adujdk

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Bedpfxjvcax Ts Adujdk Perfect for: Applications in model and mold making but also for milling other materials - universal powerhouse with a rapid traverse speed of 80 m/min Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1204 Availability: April 2025 Model: 5-axis CNC milling machine G-S-F/Uni Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions: 3500 x 1500 x 700 Control: Siemens Sinumerik 840 D SL with manual terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: pneumatic sliding door Year of construction: 2025 Condition: new

Year of construction: 1994, condition: good (used), Manufacturer: Rollomatic Year of manufacture: 1994 Type: CNC 24-F Machine number: 142 3 x 380 V, 50 Hz Bjdpowhznxofx Aduedk

Condition: excellent (used), Manufacturer: Grundfos Type: NB80-250/220 A-F-A-BAQE Speed for pump data: 2940 rpm Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Bedpfsncd A Nsx Adujdk Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm Bsdpfxsg Tvmbe Aduedk cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Bdedpfx Adjxluu Rjuek

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN: 58102 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Bdodpfsi D Iqrox Adusk

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm Bdjdpoxdwndsfx Aduek - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Bdedpjxd Ay Esfx Aduok

Condition: good (used), Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Bsdeg I Utpjpfx Aduodk Pump housing: Cast iron Impeller: Cast iron Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Plane cutter head (28149) Make ISCAR Bdedpfx Adjg Er H Hjuek type F 90 A - D160-40 M Weight 5 kg

Condition: excellent (used), functionality: fully functional, Spindle 125mm, ISO 50, Table 1525 x 1400 mm, X 1,985mm, Z 1,370mm, Y 1,450mm, W 725, 1,000Rpm, Heidenhain TNC 320, angle plate, vertical head, probe. Bdsdpfx Adexqp N Touok

Condition: new, Indramat MAC112B-0-GD-3-F/130-A-0/S0054 Permanent Magnet Motor , S.No. MAC112-80864, unused in opened original box, 100% working ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Bsdpoi D Ip Refx Adujdk

Condition: good (used), Year of construction: 2017, feed length X-axis: 550 mm, feed length Y-axis: 305 mm, feed length Z-axis: 460 mm, CNC x-axis 550 mm Bdedpfsxpqhzox Aduek y-axis 305 mm z-axis 460 mm BT 40 tool holder 12-position tool changer Main spindle 4 kW up to 10,000 rpm with cooling system Chip conveyor Siemens Sinumerik 808 D control

Condition: ready for operation (used), Indramat MAC 112D-0-FG-3-F/180-A-0/S011 Servo motor SN:71378 ,used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bsdpfx Aji D Ikaeduodk