Used Pegas Gonda 250X315 Gh-Lr for sale (101,387)

Condition: excellent (used), Functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Dkjbjv A Rppj E Tb Inel Hollow shaft or hole 110mm

Condition: used, Year of construction: 2018, operating hours: 601 h, load capacity: 5,000 kg, lifting height: 5,230 mm, fuel type: gas, mast type: standard, construction height: 3,550 mm, Optischer Zustand: sehr gut, Technischer Zustand: sehr gut Djb E Tewd Tmlob Injkl

Condition: good (used), Year of construction: 2005, operating hours: 3,055 h, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, mileage: 3,055 km, lifting capacity: 1,600 kg, net weight: 1,300 kg, This electric TRIPLEX stacker from the brand JUNGHEINRICH from 2005 is in good condition;The stacker has a capacity of 1,600 kg;Lifts to a height of 4,600 mm;The drive-through height is xxx mm;The counter shows 3,055 hours;Equipped with FREELIFT;The battery is equipped with an external charger and an automatic filling system;Tested at 80% 3h19 minutes;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube Djb Eou U R Nbs Tb Injkl

Condition: excellent (used), Year of construction: 2013, 2013 Highcon Euclid (Direct to Pack) Digital Cutting and Creasing Machine Atlas Copco GA45 Compressor with Elektronicon Control. Lauda UC-0650 2 Spix Highcon PWP SR TS °C Chiller. Maximum Speed 1,500 Sheets/Hour. Maximum Sheet Size 760 x 1,060 mm (30 x 42 inches). Maximum Stock Weight 550 gsm. Maximum Media Thickness 0.6 mm (24 pt.). Supported Substrates Label and Paperboard Thicknesses From 0.2 mm to 0.6 mm and N & F Microflute Up To 1.2 mm (47 pt.). Utilises Highcon's Patented Digital Adhesive Rule Technology (DART) For Creating Digital Crease Lines and High-speed Laser Cutting. S/No.TL 50053. Dkjb E Tb Iev U A Syonsl Integrated Extraction LTG VSRMM250/8 RD360. Machine Dimensions (W)8,600 x (D)2,100 x (H)2,300mm. Machine Weight 6.5 Tonnes. Oil-Injected Rotary Screw Air Compressor. 125L/Sec. 45kW. 3,000RPM. Weight 1 Tonne. (W)1,680 x (D)850 x (H)1,550mm. Lauda Chiller Temperature Range -5°C - 25°C. Pressure Nominal 3.7Bar, Maximum 4.7Bar. Pump Flow Nominal 196L/Min, Maximum 420L/Min. 60dBA. Water Reservoir Volume 300L. (W)1,000 x (D)1,565 x (H)1,965mm. Donaldson Torit DCE ART 501/N4 RD0 Extraction Facility. 965m³/h. Filter 10 m² Cartridge Type. 75 dB(A). 1.5kW. (W)3,900 x (D)1,700 x (H)5,000. Chimney (H)5,500mm. See Additional Documentation Attached.

Condition: not inspected (used), The BMP VOGHERA SPC 300 is an ideal choice for production shops, machining centers and manufacturing companies. Here's why: ➤ Robustness and durability The BMP VOGHERA SPC 300 is built with high-quality materials, guaranteeing its robustness and durability. It can withstand the most demanding working conditions, ensuring a long service life. ➤Ease of use Thanks to its self-learning lathe system, the BMP VOGHERA SPC 300 is easy to program and operate. Even novice operators can quickly master its features. ➢ Product highlights: ✓Self-learning lathe: the machine features an intuitive programming system that makes creating complex parts effortless. ✓Precision: the BMP VOGHERA SPC 300 offers exceptional turning precision, guaranteeing high-quality results. Dkob E Tb Ijr Ifcyenel ✓Polyvalence: With a tip height of 300 mm and a distance between tips of 1500 mm, it can handle a wide variety of parts. ✓Accessories included: the machine comes with a fixed and tracking steady rest, as well as a MULTIFIX toolholder, offering additional options for turning operations. ➢Specifications: Teach in lathe Center height: 300mm Distance between centers: 1500mm Diameter above bed: 610mm Diameter above tool carriage: 610mm Diameter in the gap: 790mm Spindle bore: 105mm Spindle Nose: CAMLOCK 105mm Spindle speeds: 25-1500mm Z travel: 600mm Quick forward in Z: 5m/min Quick forward in X: 5m/min Tailstock: CM5 Tailstock diameter: 80mm Tailstock travel: 180mm Machine equipped with: - fixed and follow rest - MULTIFIX tool holder The BMP VOGHERA SPC 300 is the ideal solution for demanding professionals looking for a high-performance, reliable turning machine.

Condition: good (used), Functionality: fully functional, machine/vehicle number: 91645644, Year of construction: 2020, operating hours: 1,001 h, load capacity: 350 kg, lifting height: 5,331 mm, fuel type: electric, construction height: 1,433 mm, battery capacity: 220 Ah, battery voltage: 24 V, empty load weight: 645 kg, Jungheinrich EKM 202 Vertical Order Picker, Year of Manufacture: 2020 Specifications: Jungheinrich EKM 202 Year of Manufacture: 2020 Operating hours (h): 1001 Lift height (mm): 3000 Overall height (mm): 1433 Load capacity (kg): 350 Net weight (kg): 645 Djbowca Duj E Tb Inekl Front tires: Polyurethane Rear tires: Polyurethane Battery year of manufacture: 2020 Battery capacity (Ah): 220 Battery voltage (V): 24 (4 x 6 V) Accessories: Integrated charger. Note: Picking height: 5331 mm Standing height: 3324 mm Length: 1528 mm Width: 750 mm Height: 1433 mm

Condition: good (used), Offer 22188 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Outer roller width approx. 260 mm Dob E Tbowcphco Inekl - Roller diameter approx. up to max. 100 mm - Max. possible number of rollers: 13 - 10 rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Condition: used, Year of construction: 2017, operating hours: 2,285 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,286 mm, Nice, working machine, low hours; Optischer Zustand: normal, Technischer Zustand: normal Deb Eewd Dg Ao Tb Inekl

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 2,378 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,575 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, drive type: Elektro, Electric 3-wheel forklift Djbowdk Igo E Tb Inokl ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery Volt: 48V Sideshift,

Condition: refurbished (used), Year of construction: 2021, Centreless grinding machine GHIRINGHELLI M2150 CNC 4 axes grinding wheel 200x610 CNC 4 axes Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy) Dkebsgmf Rrj E Tb Insl Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap.

Condition: used, Year of construction: 2019, operating hours: 5,799 h, load capacity: 1,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, Visual condition: normal, Technical condition: normal Dob E Tb Iowcva Esnekl

Condition: good (used), Functionality: fully functional, machine/vehicle number: 90494188, Year of construction: 2016, operating hours: 1,288 h, load capacity: 1,200 kg, lifting height: 3,600 mm, free lift: 1,800 mm, fuel type: electric, mast type: duplex, construction height: 2,260 mm, battery capacity: 150 Ah, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 853 kg, Jungheinrich EJC 112 Pallet stacker, year of manufacture 2016 with a Duplex mast with full freelift Details: Jungheinrich EJC 112 Year of manufacture: 2016 Work hours (h): 1288 Mast type: Standard Lift height (mm): 3600 Freelift (mm): 1800 Build height (mm): 2260 Initial lift: No Lift capacity (kg): 1200 Fork length (mm): 1150 Weight (kg): 853 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2016 Battery capacity (Ah): 150 Battery voltage (V): 24 Accessories: Internal charger. Comments: Full freelift. Dkobowcazye E Tb Injl

Condition: used, Offer 22187 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Outer roller width approx. 280 mm - Roller length 2 x 125 mm each - Roller diameter approx. up to max. 100 mm Dksbewclhxo E Tb Inol - Maximum possible number of rollers: 10 - 7 pairs of rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Condition: used, Year of construction: 2003, operating hours: 4,267 h, Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Dkob Ejwcqg Ho Tb Inel Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 6,963 h, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,242 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Dkeb E Tb Iewdk Iaenjl Condition: Ready for use and fully functional Technical condition: good Battery Volt: 48V Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: refurbished (used), Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers Deb Eoh D It Ns Tb Inokl cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Wheel width: 100 Wheel diameter: 400

Condition: good (used), Year of construction: 2016, operating hours: 11,579 h, fuel type: electric, mileage: 11,579 km, lifting capacity: 2,000 kg, net weight: 850 kg, This electric pallet truck from the JUNGHEINRICH brand comes from 2016;The pallet truck has a capacity of 2,000 kg;The battery is equipped with an external charger;Make an appointment for a test drive.Video to follow Dksb E Tb Ijv N Hryonsl

Condition: good (used), Functionality: fully functional, machine/vehicle number: FN605373, Year of construction: 2019, operating hours: 5,175 h, load capacity: 1,800 kg, lifting height: 3,300 mm, free lift: 1,530 mm, load center: 500 mm, mast type: duplex, construction height: 2,172 mm, power: 4.5 kW (6.12 HP), motor manufacturer: JULI, battery capacity: 750 Ah, battery voltage: 48 V, fork carriage width: 980 mm, fork length: 1,200 mm, fork width: 80 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: SE, front tire size: 200 / 50 -10, rear tire type: SE, rear tire size: 16 x 6 - 8, overall weight: 3,200 kg, total length: 3,248 mm, total width: 914 mm, color: yellow, Equipment: lighting, pallet forks, sideshift, Forklift is ready for immediate use! NEW tires! MEYER fork positioner with separate sideshift and new forks, 1200 mm. Deb E Tbjwcqrij Inokl The battery is equipped with an EUW. Capacity approx. 80%. HF charger 48V 100Ah. LED work lights (2x front, 2x rear). A viewing and test drive are available upon request. Delivery can be arranged; costs depend on distance.

Condition: good (used), Year of construction: 2005, Electric Stacker JUNGHEINRICH type EMC B10 Dkob Eouwrumj Tb Insl Year of construction: 2005 Maxi loading capacity: 1000 KG Centre of gravity: 600 mm Maximum width of the lower forks: 1250 mm Total length of the lower forks: 960 mm Equipped with new batteries (October 2024) Length: 1500 mm Width: 1250 mm Total Lift height: 1650 mm Weight: approx. 500 kg

Condition: good (used), Functionality: fully functional, Year of construction: 1994, operating hours: 5,729 h, load capacity: 1,200 kg, fuel type: electric, mast type: duplex, Reach Truck Manufacturer: Jungheinrich Model: ETV 12 E (24V 690 Ah) Dkebov Rpuae E Tb Insl Year of manufacture: around 1994 Operating hours: 5,729 h Mast design: Duplex (clear view) Load capacity: 1,200 kg Accessories: Charger The reach truck can be viewed in 40764 Langenfeld

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 6,610 h, load capacity: 2,000 kg, lifting height: 4,400 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 2,032 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Dkeb E Tbjwdk H Ao Insl Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Battery voltage: 48V Battery year of manufacture: 2022 Sideshift, Full cab,

Condition: good (used), Internal article no.: 24021 Boring head / fine boring head Dkeb E Totr A D Rsb Injl Mounting: HSK-A63 Manufacturer: Walter GHM Designation: B4030 G. N6 / 070-090.Z1 Diameter: 70 - 90.5mm

Condition: used, Year of construction: 2020, Several units available and all in operational condition. Machines are series 6. Dob E Towcrlksb Inekl Ask for additional information!

Condition: used, Year of construction: 2004, - Brand : Upright - Type : UL25 D/C - Year of construction: 2004 - Weight: 1535 - Hours: No hour meter - Working height: 9.6 meters - Lifting capacity: 136 kg. - Drive: 220 volts - New safety inspection possible - Aerial work platform book + CE document available - Video on our website - Trade-in and transport possible * Brand: Upright *Type: UL25 D/C * Construction year: 2004 Dkjb Eswbwdve Tb Inel * Weight: 1535 * Hours: No hour meter * Working height: 9.6 meters * Lifting capacity: 136 kg. * Drive: 220 volts

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 13,520 h, load capacity: 1,600 kg, lifting height: 9,410 mm, free lift: 3,026 mm, fuel type: electric, mast type: triplex, construction height: 3,670 mm, drive type: Elektro, Reach trucks ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Dkeb E Tewdk Hveb Inel Technical condition: good Battery Volt: 48V Sideshift,