Used Ajce Ab-400M for sale (88,075)

Year of construction: 2007, Condition: good (used), LABOTEK DDM4-120 Dry Air Dryer Stock No.: 503563 Machine Type/ Equipment Type: Dry Air Dryer Manufacturer: LABOTEC Type: DDM4-120 Year of Manufacture: 2007 The DDM is a mobile dry air dryer designed for the continuous drying of free-flowing plastic materials in granular form. The DDM is supplied as a standard mobile unit and can be installed alongside the processing machine(s) that will be supplied with dried raw material. The DDM is supplied as a standard unit with automatic dry air material transport to one processing machine and can also be supplied with a transport system for two processing machines. The DDM is designed for the drying of hygroscopic and non-hygroscopic raw materials, including reclaimed material, in the temperature range between 60 and 140°C with a maximum deviation of +2/-2°C. DDM is also available in a HT/LT (high/low temperature) version, which dries in the temperature range of 50-180°C. Due to the highly precise temperature control and a dew point temperature of -30°C, a residual moisture content of less than 0.02% can be achieved. (HT/LT 0.002%) - Connected load: 9 kW - Tank volume: 120 liters - Heating capacity: 8 kW Dcolijwakwgem Tmisg

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00343, arm reach: 2,750 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, payload: 205 kg, Refurbished ABB IRB 6640-205/2.75 manufactured in 2015.12. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-205/2.75 Model Number: IRB-6640 Year of Manufacture Robot: 2015.12 Dcelov U Uquoim Tmisg Warranty term (months): 12   Payload (kg): 205 Reach (mm): 2750 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1320   Controller: IRC5 Year of Manufacture Cabinet: 2015.12 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Year of construction: 2008, Condition: new, Type: XZF / QA90L4A Serial number: Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Diameter top: Dslim Tmsizz D Teiscg Weight: 210 kg Dimensions: mm Condition: unused

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor control Dcolimjwact Ts Tmisg

Condition: good (used), Year of construction: 2009, Functionality: fully functional, DGUV certified until: 03/2026, Bread slicer Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Mobile machine cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine + spare part service Option: Dcjlimjvkn Hzs Tmiog Maintenance contract Spare blade Service package Many bread slicers in stock!

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Output power and output current: 132kW | 260A Dcjliorakqmem Tmiog ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 2 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: used, Year of construction: 1980, Technical details: grinding length: 600 mm grinding width: 300 mm total power requirement: 7,5 kW Djliswg H Hqsm Tmijcg number of spindle speeds: 0-3000 grinding wheel motor: 7,5 kW grinding wheel diameter: 300 mm dimensions of grinding wheel: 76 x 20 mm ABA magnetic table flat grinding machine *

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Dcslim Tmetddw Aoiog Hydraulic lift, lifting capacity around 1 ton.

Condition: used, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm mitter cutting - all-position 0-45 ° turning speed range 1420 / 2840 U/min capacity 45 degrees: square 110 mm capacity 45 degrees: flat 50 x 240 mm capacity 90 degrees: flat 95 x 240 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm voltage 400 V total power requirement 3,7 / 4,5 kW Djled Scrrsim Tmiocg weight of the machine ca. 600 kg dimensions of the machine ca. 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor control Dcelim Tewact Hsmijg

Condition: used, Functionality: unexamined, Bread slicer Dcelimevktmmj Tmisg Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Mobile machine cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine We have a large selection of bread slicers in stock!

Year of construction: 1990, Condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm Dcelim Tmodd Ilxjijg -Weight approx. 300 kg

Year of construction: 1990, Condition: good (used), - double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW Dcslimjbdm Tas Tmijg - shaft diam. 35 mm - 1500 rpm

Condition: used, thickness of jaw 160 mm Djljv Dxyxeim Tmiocg max. clamping width 240 mm ca. tension force ca. 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2002, machine/vehicle number: 21161, Offer 23397 Dcslim Toqmnhgjmieg Technical data: - Saw blade diameter up to 350 mm - 2 saw blade spindle speeds 22 + 44 rpm - Mitre adjustable left + right up to 45° - Cutting range at 90° - round tube 115 mm - Square tube 105 x 105 mm - Solid material (saw blade 350 mm) 60 mm - Flat profile 140 x 80 mm - Cutting range at 45° - round tube 115 mm - Square tube 90 x 90 mm - Pneumatic material clamping vices - Coolant device - Dimension stop 1500 mm - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 2.2 kW - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 2004, Doublesided manual polishing stand make METABO, type 72730 with 5.5 kW, 1500 rpm, incl. two polishing covers. Machine was overhauled, blasted, repainted, new bearings for motor and polishing shaft, new v-belts. Dcjlisfw Uzxom Tmiog

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 1040, Offer 23342 Dslim Tmsraiu Deijcg Hydr. welding turntable and tilting table - three axes - welding manipulator Technical data: - max. load capacity 750 kg - Flat plate diameter 700 mm - min. Table height in horizontal position approx. 720 mm - Average table height in horizontal position approx. 920 mm - Max. table height in horizontal position approx. 1060 mm - Working height manually adjustable in 3 steps - Faceplate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for direction of rotation, swivel or tilt - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: excellent (used), Polishing stand make METABO type 72712 with 7.5 kW motor, built for the use of 960 mm polishing buffs / wheel, rotation speed at the moment 425 / 500 / 600 / 710 /min, perfect for manual use or as polishing unit for work with robots We can offer the installation of a frequency changer if requested Djlisfw Uz Hom Tmiecg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 5454, Offer 23372 Hydr. welding turntable and tilting table - three axes - welding manipulator Technical data: - max. load capacity 4000 kg - Face plate diameter 1500 mm - min. Table height in horizontal position approx. 1070 mm - max. table height in horizontal position approx. 1780 mm - Face plate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx Djlim Toqlahzemijcg - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 4.0 kW - Manual remote control for direction of rotation, swivel or tilt - E. foot switch - Space requirement approx. W 3000 x H 1070 x D 1650 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 1994, machine/vehicle number: 941822, Offer no. 24266 Technical data: - Sanding belt dimensions 3500 x 75 mm - 2 sanding belt speeds - adjustable contact wheels / sanding rollers - mot. Grinding attachment for external pipe grinding - speeds 1500 / 3000 rpm - Suction pipe for connection to central suction system - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 900 x H 1650 x D 1700 mm - Weight approx. 350 kg Dolot Er I Uoim Tmiecg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg Dcolov Rbivsim Tmisg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg Dcslim Terkmaasmiog

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown Dcslim Tjrf Uqzemisg - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: - max. load capacity 250 kg - Face plate diameter 400 mm Dcelim Tmsur Icujiog - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for speed - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Year of construction: 1987, Condition: good (used), machine/vehicle number: 87298, Lg.No. 20344 Technical data: Drilling capacity in steel ST 60 13 mm quick-action drill chuck 1 - 13 mm drilling spindle speed infinitely variable 630 - 5000 rpm drilling spindle stroke 80 mm throat 195 mm column diameter 65 mm table dimension W 240 x D 260 mm drilling unit height adjustable by hand crank max. distance table / base plate to spindle 280 mm drive 400 V / 0,45 kW space requirement approx. W 300 x H 800 x D 700 mm Delimonub Auj Tmiecg weight approx. 50 kg