Used Maho Mh600E2 Cnc for sale (8,661)

Condition: good (used), Year of construction: 2001, machine/vehicle number: 236, total height: 2,200 mm, total length: 2,000 mm, total width: 2,300 mm, overall weight: 2,000 kg, TECHNICAL DATA: - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Control: ROLLOMATIC Grinding range: - Grinding diameter: 0.1 – 2.0 mm - Collet: B 8 - Cutting length: 0 – 15 mm - Helix angle: 24 – 45° - Total length: 30 – 50 mm - Z stroke: 67 mm - Y stroke: 35 mm Axes: - A: 63° - B: 360° - C: 360° EQUIPMENT: - Three-axis simultaneous + two robot axes Station 1: - Robot for loading/unloading - Shaft diameter: 0.5 – 3,175 mm - Total length: 30 – 50 mm Station 2: Crjb E Howdn Dfe Ty Seb - Grooving and relief grinding - Direct drive Spindle, 70 mm diameter, 0.30 kW - Inverter: 2,000 – 6,000 rpm - Grinding wheel for grooves: 150 mm diameter - Grinding wheel for relief grinding: 100 mm diameter

Year of construction: 2008, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC426 Main Drive Crsb E H Tswd Uyyoy Sjb Spindle speed range 3500 Tool taper 50 ISO Movement X-Axis Movement 1600 mm Y-Axis Movement 920 mm Z-Axis Movement 950 mm Table Outer length 850 mm (extends to 1600 mm with supports) Outer width 850 mm Table load 3000 kg (5000 kg with supports) Media Chip conveyor Yes This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Application Types Other Machine Tools

Condition: like new (used), Year of construction: 2007, operating hours: 1,234 h, Functionality: fully functional, turning diameter over cross slide: 290 mm, turning diameter: 380 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 166 mm, travel distance Y-axis: 339 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 30 m/min, total length: 2,885 mm, total width: 1,720 mm, torque: 72 Nm, overall weight: 4,000 kg, bar passage: 56 mm, chuck outer diameter: 1,670 mm, spindle nose: 120 h5, Equipment: documentation/manual, Gildemeister CTX210 in new condition and we took it over from a school/training institute. The machine has only 364 spindle hours and 1234 operating hours! The machine is very complete with original Schunk 3-jaw and various driven and static VDI-30 holders. Crsb E H Tyowcftno Sob The machine can be viewed in operation by appointment!

Condition: like new (used), Year of construction: 2021, operating hours: 2,868 h, Functionality: fully functional, turning length: 5,000 mm, turning diameter over cross slide: 830 mm, turning diameter: 975 mm, spindle bore: 181 mm, travel distance X-axis: 350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 5,090 mm, tool mount: 12 mm, turning diameter over bed slide: 830 mm, SAMSUNG SMEC SL 4500 XLY DRIVEN TOOL LATHE TECHNICAL SPECIFICATIONS Brand: SMEC Model: SL 4500 XLY CNC: Fanuc Oi-TF Year: 2021 Swing over bed: 975 mm Swing over slide: 830 mm Maximum turning: 620 mm Maximum milling: 704 mm Distance between centers: 5000 mm Spindle speed: 12020 rpm Bar passage: 181 mm X: 350 mm Y: 200 mm (+/- 100 mm) Z: 5090 MM Crebjwhf Dks E H Ty Seb C: 0.001 (360º) 12-position motorized turret (BMT 75) Machine weight: 25,000 kg PRICE AND MORE INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDING MACHINE, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, BENDING MACHINES)

Condition: used, Year of construction: 2006, Functionality: fully functional, The machine model is Rotaflex DV 25/15. It is our top-model machine. It was made in 2006. It is fully functional and running. It is very good maintained and therefore it will be functional for a long time. Additionally, we offer our technical supply for running the machine. The machine has 15 stations, 14 modules, 26 spindles. There are; 2 pcs. Recessing Modules (Mapal Recessing Head for U-Axis machining) 4 pcs. 0°-90° Angle Adjustable, Double Spindle, 3-Axis (X,Y,Z) Modules 8 pcs. Horizontal, Double Spindle, 3-Axis (X,Y,Z) Modules 6 pcs. B-Axis clamping with simultaneous CNC machining 3 pcs. B-Axis clamping with 5° angular positioning 5 pcs. fixed clamping Cjb Eev E E Rye H Ty Serb Flexbility: Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Advanced Turning Capabilities: (The current machine does not have a turning unit, but it can be added!) Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Travel : 100 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 7.5/5.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 34 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 5.5/3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - X stroke : 140 [mm] - Z stroke : 235 [mm] - Y stroke : 70 (+/-35) [mm] - Live tools speed : 5000 [rpm] - Live tools power : 1.0 [kW] LOWER TURRET - Number of positions : 6 - X/Z stroke : 140 / 310 [mm] POWER SUPPLY - Total installed power : 30 [kVA] Ceb E Hjuhafls Ty Ssrb WEIGHT & DIMENSIONS - Machine floor space : 2.220 x 1.460 [mm] - Machine height : 1.700 [mm] - Machine weight : 3100 [kg] MACHINE HOURS - Number of working hours : 14540 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Bar loader : Top Automation FU342SX (2021) - Electric transformer

Condition: excellent (used), Year of construction: 2010, Functionality: unexamined, machine/vehicle number: 278, total height: 2,400 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 2,500 kg, travel distance X-axis: 340 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 240 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 197 °, TECHNICAL DATA: - Max. grinding wheel diameter: 150 mm - Speed range: 1,000 – 8,000 rpm - Workpiece taper: SK 50 - Max. workpiece weight: 50 kg Workpiece dimensions: - Max. diameter: approx. 250 mm - With counter center: max. Ø 125 mm - Max. length: approx. 500 mm - With counter center: max. 250 mm - Maximum grinding length: 340 mm Ceb E Hswdpc Nj Ty Sorb Travel paths: - X-axis grinding stroke: 340 mm - Y-axis infeed: 240 mm - Z-axis infeed: 240 mm Axes: - A-axis: - Speed: 120 rpm - Rotation range: 360° C-axis: - Speed: 20 rpm - Rotation range: 197° EQUIPMENT: - Coolant treatment - Oil mist extraction - Documentation Note: A standard truck is sufficient for transport.

Year of construction: 1990, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 5000 rpm Tool taper ISO 50 Cjb E H Towd Uytjy Sjrb Additional Equipment Automatic tool changer: 40 positions Working spindle diameter: 128 mm This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 163101 € 3213.09 € 2000x6000 mm Hypertherm XPR 170 CORE 60 mm 38 mm 38 mm 35 mm 22 mm 25 mm 170 A 12 m/min 35 m/min +/- 0,1 mm 0,1 mm 6000 kg HyPerformance plasma power sourceHyperthermXPR 170 COREWITH "TRUE HOLE" TECHNOLOGY Automatic gas console Csb E Hovnv Dij Ty Sjrb Plasma torch height control Collision protection (torch brake away system) CNC control with Aurora Software Lantek CAD/CAM software with auto nesting Control of filter unit by CNC Remote control diagnostic by Ethernet Cutting plate alignment function User manual in GERMAN or ENGLISH Options: Suction with filter Morepricefor Optimix instead of Core Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request.

Condition: excellent (used), Year of construction: 2000, MAZAK SUPER QUICK TURN 200M x 500 Max. machining diameter: 300 mm Max. machining length: 538 mm Max. spindle speed: 5,000 rpm Max. milling speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: - CNC control: Mazatrol PC Fusion CNC 640T - KITAGAWA three-jaw chuck B-208, diameter 210 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 stationary tool holders Ceb Esv Nv Ids H Ty Sorb - 2 driven tool holders

Condition: used, core drilling diameter max. 400 mm bore depth 3500 mm swing diameter 850 mm Control Siemens 840D full boring Ø 20 - 200 mm core boring Ø - 400 mm drilling out Ø - 400 mm mm method of boring BTA motor output at 1500-5000 rpm 100 kW speed range step 1 10 - 499 U/min speed range step 2 500 - 2000 U/min spindle bore Ø 120 mm feed speeds 0 - 7000 mm/min rapid speed 7000 mm/min total power requirement 200 kW weight of the machine ca. 16 t dimensions of the machine ca. 14 x 8,35 x 2,2 m Equipment / Accessories: - set-up station with loading gantry for parallel set-up during drilling process - drill pipes - 2 circular roundabouts for vibration dampers (large/small) - half-shell clamping device (small/medium/large) Csbjwcrwao E H Ty Sorb - cone discs - radial clamping discs - chip conveyor (2004) - oil cooling and filtering system with band filter - chip shredder and centrifuge (2017) - oil tank 20000 l (emptied) - cooling lubricant pumps - 3 screw spindle pumps - stop for counterholder - hydraulic cylinder Ø 25.4 x 120 mm stroke - counterholder - hydraulic cylinder Ø 82.6 x 95 stroke - guide slide - motor output 55 Nm at 2000 rpm - contact force max. 40 KN - longitudinal travel max. 500 mm in front of fixed headstock - clamping diameter for BTA drilling oil supply Ø 490 mm - feed speed 0-7000 mm/min - rapid speed 7000 mm/min - shell-type tailstock - motor output 18 Nm at 2000 rpm - feed speed 0-7000 mm/min - rapid speed 7000 mm/min - toothed belt 40T10/1390 - various spare parts - documentation

Condition: refurbished (used), Year of construction: 2014, Functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Crob Eeu U E Avs H Ty Seb Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: good (used), Year of construction: 1999, Functionality: unexamined, machine/vehicle number: 061, total height: 2,200 mm, total length: 2,000 mm, total width: 2,300 mm, overall weight: 2,000 kg, TECHNICAL DATA: - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Control: ROLLOMATIC Grinding range: - Grinding diameter: 0.1 – 2.0 mm - Collet: B 8 - Cutting length: 0 – 15 mm - Helix angle: 24 – 45° - Total length: 30 – 50 mm - Z stroke: 67 mm - Y stroke: 35 mm Crobewdn Dls E H Ty Ssb Axes: - A: 63° - B: 360° - C: 360° EQUIPMENT: - Three-axis simultaneous + two robot axes Station 1: - Robot for loading/unloading - Shaft diameter: 0.5 – 3,175 mm - Total length: 30 – 50 mm Station 2: - Groove and relief grinding - Direct-drive spindle, 70 mm diameter, 0.30 kW - Converter: 2,000 – 6,000 rpm - Groove grinding wheel: 150 mm diameter - Relief grinding wheel: 100 mm diameter

Condition: good (used), Year of construction: 1994, bending angle: 190 °, bending radius: 700 mm, overall weight: 3,300 kg, wall thickness: 11 mm, - PLC: Siemens Simatic S7 - NCU control system: Siemens 840D - CNC control: MMI Multicontrol 2000 - Dimensions and weight: Ceb E H Towhdrmoy Sjrb Length: 11.9m, width: 5.0m Height: 2.3m (according to manufacturer's data sheet)  3.5m currently measured at the highest point of the machine (see sketch below) o Empty weight: 33t o max. pipe Ø: 168.3mm o max. bending radius Rm: 700mm o min. Bending radius Ri: 80mm o Pipe extension length: 6000mm o max. bending angle: 190° o max. moment of resistance with St35W: 201cm3 - Electr. connected load: o 400V/50Hz o Full load current: 85A

Condition: used, Year of construction: 2020, Working dimension Z: 300 mm Number of milling spindles: 1 HOLZ-HER 5-axes spindle 7840: Yes Milling spindle liquid-cooled: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction HOLZ-HER Drilling aggregate 7882: Yes Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 8 Crjb E H Tyov R Ekws Seb Positioning aid: Yes Laser setup aid: Yes Self-adjusting machine table: Yes Vacuum pump: Yes HOLZ-HER ECO-Vac: Yes Safety device: Safety mat Interface for .dxf data: Yes Pendulum machining: Yes Control: PC control Control cabinet cooling: Yes Software: HOLZ-HER CAMPUS Conformity marking: CE mark Space requirement Length: 8,95 m Space requirement Width: 4,62 m Space requirement Height: 2,86 m

Condition: good (used), Year of construction: 2011, Functionality: fully functional, CNC Turning Center with Bar Loader Manufacturer: Miyano Type: ABX-64SYY Year of Manufacture: 2011/06 Control: Fanuc 31i-B Technical Specifications: Workpiece Length SP1/SP2: 118mm / 125mm Bar Diameter: 64mm Turning Diameter: 165mm Number of Turrets: 2 Speed: 6,000 rpm Crjb E H Tyewdh U Re Seb Machine Weight: 11,000kg

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, CNC Machining centre with 4 controlled axes FOM INDUSTRIE DALI 70 Year: 2015 Condition: excellent, as new (completely renewed) Configuration: - Electrospindle 6,5 kW, 19,000 rpm (ISO30) - 7+3 tool magazine on head (ISO30) - No. 8 vices with independent positioning - Left and right pneumatic reference stop - Dual station machining on two working areas - Module for graphic designing in 3D for FOMCAM - Module for insertion of geometries 'defined by the user' and import of drawings in DXF format for FOMCAM - Data import software in accordance to FOM protocol and wireless optical bar code reader - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system - Chip conveyor - Mobile control consolle with PC, 24'' monitor, keyboad and mouse - Tool set A3 / ISO30 Csb E H Towhrlzjy Sjrb - Cone with horizontal disc Ø 200 mm

Condition: used, Year of construction: 2010, CNC Intorex TMC 3000 Maschining centre 8 (9) axis -Max. working lenghts 3000mm -Max working square 220x220mm -Max. working diameter 450mm (when wood round) Csbjunk Rmo E H Ty Ssrb -Stroke axis X 3800mm -Stroke axis Y 460mm (plus 230, minus 230) -Stroke axis Z 510mm -Stroke axis Y2 360mm (turning) -Stroke axis Y3 360mm (milling) -Stroke axis Y4 360mm (sanding) -Stroke axis B (rotary +/- 90°) Power: -Axis A (rotary main motor) 22,2 kw 0-1500 upm -Axis Y2 11kw 1000-4500 upm -Axis Y3 11kw 1000-6000 upm -Axis Y4 2,2 kw 3000 upm max. 24.000 upm -Electrospindle (HSC) 12 kw max. 24.000 upm - Toolchanger 6 positions HSK 63 F - Total installed power 70 kw - Weight approxm. 9,5 tons

Year of construction: 2007, Condition: ready for operation (used), Workpiece Workpiece X 930 mm Workpiece Y 320 mm Workpiece Z 190 mm This KRÜSI KM-95 G1 was manufactured in 2007. A CNC Wood Machining Centre, it is ideal for a variety of woodworking applications. Consider the opportunity to buy this KRÜSI KM-95 G1 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining Cjbjwdza Ho E H Ty Sorb

Condition: good (used), Year of construction: 1989, spindle speed (max.): 900 rpm, spindle speed (min.): 250 rpm, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 190 mm, grinding wheel diameter: 200 mm, overall weight: 2,000 kg, rotational speed (min.): 3,000 rpm, Workpiece diameter max.: 320 mm Max. workpiece length between the tips: 400 mm Longitudinal movement (X-axis): 400 mm Vertical movement (Y-axis): 250 mm Transverse movement (Z-axis): 190 mm Sanding head, swivels around the vertical axis: 360° Sanding head swivels around the vertical axis: 220° Max. grinding wheel diameter: 200 mm Grinding spindle diameter max.: 70 mm Speeds (pole-changing): 3000 - 6000 min^-1 | 4500 - 9000 min^-1 Drive power (pole-changing): 2.4 / 3.0 kW Center height / with intermediate plate: 165 mm Workpiece holder: ISO 50 Tailstock taper: MK 3 Cjb Eewhbr Rs H Ty Ssrb Total weight of machine: 1605 kg Total weight of switch cabinet: 310 kg Connected load: 12 kVA Comprehensive technical documentation is available.

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, turning diameter: 410 mm, spindle bore: 91 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 670 mm, bar diameter: 80 mm, CNC Fanuc 18i - T WORKING RANGE Max. workable bar diameter: mm 80 Max. diam. workable from recovery: mm 410 Max. workable length: mm 670 Max. rotating diameter: mm 600 MAIN SPINDLE Max. rotation speed: rpm 3,500 Spindle nose: ASA 8 “ Spindle hole: mm 91 Internal diameter of bearings: mm 140 Motor power: kW 22 Motor torque: Nm 539 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction Automatic positioning of B-axis: mm 660 B-axis rapid: m/min 15 TURRET Number of positions: N° 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32-40-50 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: N° 12 Max rotation speed: 4,000 rpm Motor power: 3.7 kW Motor torque: 70 Nm C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: 100 rpm AXES X-axis stroke: 255 mm Z-axis stroke: 670 mm Y-axis stroke: 110 mm (+ 60 / – 50) X-axis rapid: 20 m/min Z-axis rapid: 24 m/min Y-axis rapid: 7.5 m/min COOLANT Tank capacity: 250 l Pump flow rate: 120 l/min Pump motor power: 0.75 Kw Crjb E Howhm Rrj Ty Ssb DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.450 x 1.900 x 2.100 mm h Height of spindle center: mm 1.600 Weight with chip conveyor: Kg 6.300 Machine equipment: • Self-centering hydro-divider Autoblock type AXN 315 mm • Various motorized tool holders (radial and axial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2013

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, CNC Lathe with Bar Feeder Manufacturer: Mazak Model: Quickturn Nexus 250-II MSY Year of Manufacture: 2016 Technical Specifications: Travel X – Y – Z axis: 230 / 100 / 575 mm Machining diameter: 380 mm Bar diameter: 76 mm Machining length: 538 mm Speed: 5,000 rpm Bar feeder: LNS O.L. SERVO S2 With robot interface Automatic door opener Cjb E H Tyswdh S Ne Sjrb

Year of construction: 2024, Condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table Crjb E H Tshlkqpjy Sjb - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 650 mm largest grindable workpiece diameter 360 mm max load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Csb E H Tyetqf Sqj Sjrb Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Year of construction: 2025, Condition: new, XX100292 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: Crob E H Tsiv Imnoy Ssb • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4