Used Isal Pb170 D-4 for sale (37,026)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm Csb E Ajd Tbbdez Ddorb 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, 3D perforated table 2000 x 1000 x 200mm, grid 100mm, plate thickness 28mm, hole diameter 20mm, Csb E Ajvlli Ajz Ddorb Plan machined, very solid weight approx. 750 kg With table base Price is without accessories

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: NR: 605.05.033.15, cutting height (max.): 133 mm, cutting width (max.): 800 mm, cutting length (max.): 3,200 mm, power: 7.5 kW (10.20 HP), saw blade diameter: 400 mm, pivoting range: 46 °, table width: 800 mm, height adjustment type: electric, cutting width at rip fence: 800 mm, Length stop 1 digital, length stop 2 manual, Xmotion control, electric parallel stop, protective hood also for miter cuts, Csbswdgvyj E Az Ddsrb

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D Spiral Kneading Machine/Mixer 32 Ah connection with 2-speed motor On casters Csb E Azodc Eh Ao Ddorb Top condition, silent If you have any further questions, please contact us. Thank you in advance.

Condition: like new (used), Year of construction: 1990, Functionality: fully functional, GANNOMAT JUNIOR 320 Dowel and Slot Drilling Machine Very good condition, as good as new. The machine comes from an assembly company and has been used very little. It can mill slots and drill dowel holes on two levels without re-clamping. 380V, 1500W 2800 rpm Built in 1990 With this machine, you can mill slots for lock cases and similar items, or create all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and similar applications. Drilling on two levels, the grids and stops, and the machine's design allow dowel joints to be produced in a very short time, making it very economical. The machine requires a 6-bar compressed air supply (air consumption is very low). Clockwise rotation Crob E Az Dewb U H Isdjb Milling and drilling Very good and clean. With 2 angle stops (a center stop and a side stop that can be used on both sides) and a 45° miter stop. You also get a 2000mm long stop rail with 2 folding stops. This stop rail can also be extended. The workpiece is clamped with 2 pneumatic clamping cylinders. The height adjustment from one drilling level to the other is also pneumatic. The pneumatic switch for this is located at the front of the machine, ensuring quick adjustment of grids and drilling levels. With a 12mm precision grid rail, which has a center grid and 12 grids on the left and right. Can be quickly converted to mortise milling. The machine can then be used without a grid. With 2 adjustable stops on the left and right, it then has a working width of max. 420mm. The machine has conical stop rings at the front of the machine table, which can be rotated downwards if necessary. The maximum hole height is 100mm. The maximum The hole depth is 150 mm with stop and scale. The maximum workpiece height is 160 mm. Everything works perfectly. The machine will be delivered and demonstrated by us personally throughout Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible upon request. The machine table is 870 mm wide, 140 mm deep at the sides, and 350 mm deep in the middle. Professional tool, not hardware store junk. You can start working with the machine immediately. With 2-jaw drill chuck up to 20 mm. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are OK and operate smoothly.

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, Functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW Ceb E Azewc R D Ej Ddorb • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth Crsb E Azjguk Dks Ddjb - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg Crsb E Ajv A Rq Tsz Ddeb

Condition: excellent (used), Year of construction: 2006, For sale are a functioning and very well-maintained Weishaupt GL9 dual-fuel oil/gas burner, 3510 kW, including gas valve and control panel, manufactured in 2006. Weishaupt GL9/1-D (3510 kW) With control panel - Output: 797-3510 kW 67-295 kg/h - Version: TMD - Connection pressure: 15-200 mbar - Connection pressure: 30-140 mbar - Delivery is available upon request. - All technical data can be seen in the pictures. - Larger and multiple pictures are available upon request. Cjb E Azjia N Ipe Ddorb Priority sale to dealers, businesses, or exporters. All information is provided without guarantee; errors and prior sale are reserved. The seller assumes no liability for typos or data transmission errors.

Condition: like new (used), Technical data for the wide-span shelving system: Racking system: SSI Schäfer Type: WR 600 Technical data for installation: Number of rack rows: 01 pcs. Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x wide-span shelving uprights, second choice (new) Material color: sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, 01x swivel castor / stop castor | 01x fixed castor Castor Ø: 100 mm (bolted framework) 2,195 mm high 1,050 mm deep 08x Wide-span shelving traverse, second choice (new) Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped crossbar Bracket: 5 HK (hooks) Clear width: 2,400 mm 04x chipboard II. Choice (new) Thickness: 22 mm Dimensions: 2,380 x 960 mm Design: all-round butt joint 16x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Crsb E Aeqhkh Asz Ddob

Condition: excellent (used), mileage: 274,387 km, first registration: 12/2016, overall weight: 19,500 kg, fuel type: diesel, color: white, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, Year of construction: 2016, machine/vehicle number: VF620J864HB002768, Equipment: ABS, air conditioning, Przedmiotem ogłoszenia jest samochód ciężarowy marki Renault Gama D z zabudową śmieciarki Semat Cena :108000 PLN EURO VI 1wsza rejestracja: 2016/12/23 Przebieg: 274387 km Skrzynia biegów: Automatyczna Allison Paliwo: Diesel Zawieszenie: resor - pneumat DMC: 19500 kg masa własna: 13175 kg Creb Esuk H Iaj Az Ddjb ładowność: 6325 kg moc: 210 kW Zabudowa: Typ: Semat pojemność zabudowy: 16 m3 Wymiary: długość: 8,50 m szerokość: 2,50 m wysokość: 3,45 m MOŻLIWOŚĆ MONTAŻU ŁAP DO POJEMNIKÓW 1100L Wyposażenie: ABS centralny zamek elektryczne szyby elektryczne lusterka hydrauliczne wspomaganie kierownicy hamulec silnikowy hydraulika immobilizer intarder/retarder komputer pokładowy klimatyzacja manualna kamera cofania lampy przeciwmgielne luk dachowy ogranicznik prędkości radio fabryczne regulowane zawieszenie skrzynka narzędzi sygnalizacja cofania światła rotacyjne światła LED Zapewniamy: Serwis pojazdu po zakupie Naprawy eksploatacyjne zakupionego u nas sprzętu Transport w dowolne miejsce na świecie Na Państwa życzenie wykonamy: Wymianę filtrów i olei w samochodzie Wymianę filtrów i olei w zabudowie Usługa dodatkowa Jako lider na rynku Europy Środkowej specjalizujący się w sprzedaży pojazdów i urządzeń komunalnych, chcielibyśmy zaproponować Państwu skorzystanie z naszego wieloletniego doświadczenia w tym zakresie i sprzedaży za naszym pośrednictwem zbędnego sprzętu komunalnego W Państwa imieniu zajmiemy się: - kontaktem z klientem w kilku językach obcych - przygotowaniem dokumentacji sprzedażowej i posprzedażowej. - organizacją transportu drogowego i morskiego - organizacją dokumentacji celnej (odprawa celna, Eur 1, T1) - przygotowaniem pojazdu do sprzedaży Możliwość leasingu pojazdów starszych, nawet 18 letni. Jeśli chcesz poznać szczegóły skontaktuj się z nami.

Condition: used, overall weight: 44,000 kg, empty load weight: 4,652 kg, maximum load weight: 39,348 kg, axle configuration: 3 axles, wheelbase: 7,400 mm, first registration: 03/2023, next inspection (TÜV): 03/2026, suspension: air-lift, tire size: 385/65 R 22.5, Year of construction: 2022, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Axle manufacturer SAF, anti-spray, disc brakes, air-lift suspension, lifting and lowering, lift axle 1st + 3rd axle, 2x extendable (center and rear), suitable for: 45' containers, 40' containers, 30' containers, 2x 20' and 20' containers flush with the rear, 15 + 2x 7-pin connectors, 2x LED work lights at the rear, chassis height and fifth wheel height: 1,110mm, large plastic toolbox, 2 x 3-chamber lights, 2 x LED reversing lights, ADR, available immediately Cjb E Azjwam Nrj Ddsrb

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Cob E Asguk Dvoz Ddjrb - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, axle configuration: 3 axles, first registration: 03/2017, suspension: air, color: other, tire size: 385/65, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - SAF Assen = More information = Crjb E Az Dev Uwp Tedeb Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg Measures Width: 247 cm Weights Empty weight: 4.819 kg Carrying capacity: 38.181 kg GVW: 43.000 kg Identification Registration number: OP-60-NZ Serial number: XL9DTECFTH0103187

Condition: refurbished (used), Year of construction: 2012, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2012 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder Crob E Azov Ebx Hs Ddjb - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: good (used), saw blade diameter: 315 mm cutting diameter: 120 mm total power requirement: 1,3 / 1,8 kW weight of the machine approx.: 230 kg Capacity 90° Round: 75 mm Capacity 90° Square: 70 mm Capacity 90° Rectangle: 95 X 60 mm Capacity 45° Round: 65 mm Capacity 45° Square: 60 mm Capacity 45° Rectangle: 70 X 55 mm Saw Size: 250 x 2.00 x 32 mm Boron Oil: 20 l Main Motor: 1.3/1.8 kW Crobsr Hbgqj E Az Ddjb Saw Speed: 25/50 - 45/90 m/min Voltage: 380 V Vise size: 120 mm Working Height: 1.300 mm Length: 700 mm Width: 450 mm Height: 670 mm Weight: 160 kg Equipments: - Metal circular saw - 2-step gearbox engine - double miter circular saw until up to 45 ° left / right - new saw blade - Coolant device - Attack - Machine base

Condition: used, axle configuration: 3 axles, first registration: 01/2015, Year of construction: 2015, Equipment: ABS, Rear axle 1: Lift axle Extendable body: Yes General technical inspection (APO): Valid until January 2026 Crobjv Tzf Aj E Az Ddsb Contact Bastien Begemann or Corné Visser for further information.

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Cjbsv U Ag Do E Az Ddsrb Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock.

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Cjb Eerrh T Ae Az Ddjrb Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, axle configuration: 3 axles, first registration: 06/2017, suspension: air, color: other, tire size: 385/65, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - Air Suspension Crob Eev T Tupj Az Ddjb - Disc brakes - SAF Assen = More information = Axle configuration Make axles: SAF Rear axle 1: Tyre size: 385/65; Lift axle; Max. axle load: 9000 kg; Tyre profile: 40%; Brakes: disc brakes; Suspension: air suspension Rear axle 2: Tyre size: 385/65; Max. axle load: 9000 kg; Brakes: disc brakes; Suspension: air suspension Rear axle 3: Max. axle load: 9000 kg Measures Width: 247 cm Weights Empty weight: 4.834 kg Carrying capacity: 38.166 kg GVW: 43.000 kg Maintenance APK (MOT): tested until 06/2025 Identification Registration number: OP-15-TR

Condition: good (used), door magnet, door magnet, holding magnets, fire door -Type: GT 70 A 001 -Voltage: 24 V 8 W -Holding force: 2000 N -Quantity: 5x magnets available -Price: per piece -Dimensions: Ø 70 x 35 mm -Weight: 0.83 kg Ceb Eocb T R Hs Az Dderb

Condition: new, Year of construction: 2025, You can call us 24/7 for vibrating screen system for sale Our vibrating screen systems make your production processes more efficient by combining high performance and durability. Our CVS-1240, CVS-1640, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 and CVS-2470 models offer options suitable for your needs with different layer numbers and sizes. Each model provides maximum efficiency with the number of layers ranging from 2 to 4 and large production capacities. Our vibrating screen systems meet all your production needs with production capacities ranging from 70 t/h to 336 t/h. For example, our CVS-1240 model has a production capacity of 70 - 95 t/h with its 1,200 x 4,000 mm layers and operates with only 7.5 kW motor power. Our other models draw attention with their higher capacities and different motor powers. Especially our CVS-2470 model can produce up to 336 t/h with its 2.400 x 7.000 mm layers and double motor power. Each of our vibrating screen systems offers you a long-lasting use with their durable structures and high capacities. With weights from 7,400 kg to 24,000 kg, they are robust and reliable. It allows you to increase your production capacity while reducing your costs with both high efficiency and low energy consumption. Csboud Tbrj E Az Ddorb Our vibrating screen systems have the capacity to screen all kinds of materials quickly and effectively. They are designed to optimise your production processes, increase productivity and reduce costs. Each model offers flexible solutions with various layer options and production capacities. It operates smoothly for many years with its high quality and reliable performance. Our products offer you the best results by combining superior engineering and innovative design. Make a difference in your production processes with our vibrating screen systems.

Condition: good (used), Double D Rack oven 2006, stainless, single rack oven, timer and temperature controls, with fan and light, 45Kw, 3Ph Creb E Azoquvmle Ddsb

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Crjb E Az Dev Ukz Aodeb Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, You can call us 24/7 for vibrating screen system for sale Our vibrating screen systems make your production processes more efficient by combining high performance and durability. Our CVS-1240, CVS-1640, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 and CVS-2470 models offer options suitable for your needs with different layer numbers and sizes. Each model provides maximum efficiency with the number of layers ranging from 2 to 4 and large production capacities. Our vibrating screen systems meet all your production needs with production capacities ranging from 70 t/h to 336 t/h. For example, our CVS-1240 model has a production capacity of 70 - 95 t/h with its 1,200 x 4,000 mm layers and operates with only 7.5 kW motor power. Our other models draw attention with their higher capacities and different motor powers. Especially our CVS-2470 model can produce up to 336 t/h with its 2.400 x 7.000 mm layers and double motor power. Crsboud Tdae E Az Ddjb Each of our vibrating screen systems offers you a long-lasting use with their durable structures and high capacities. With weights from 7,400 kg to 24,000 kg, they are robust and reliable. It allows you to increase your production capacity while reducing your costs with both high efficiency and low energy consumption. Our vibrating screen systems have the capacity to screen all kinds of materials quickly and effectively. They are designed to optimise your production processes, increase productivity and reduce costs. Each model offers flexible solutions with various layer options and production capacities. It operates smoothly for many years with its high quality and reliable performance. Our products offer you the best results by combining superior engineering and innovative design. Make a difference in your production processes with our vibrating screen systems.