Used Isal Pb170 D-4 for sale (37,117)

Condition: excellent (used), Year of construction: 2002, WEISHAUPT G7/1-D, gas burner with gas train. -Power: 250-1550 kW Bwolq Sewgykcortxol -Version: ZD-LN -Year of manufacture: 2002

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Bwjlqstq Nlro Srtxjl Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. Bjljwfpkceq Srtxjwl - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet, all holders with c6 have been removed, no longer available pallet 5 (photo 1 to 4) euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 (photo 5 to 8) euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 (photo 9 to 12) euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 (photo 13 to 16) euro 2730 total 3x driven tools vdi 40 euro 580/pc Bjlq Srevry T Netxswl 11x tool holder vdi 40 euro 90/pc

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, overall weight: 1,300 kg, filling opening length: 1,300 mm, filling opening width: 1,400 mm, Technical specifications: Funnel opening: length x width 1300 x 1400 mm Cutter opening: length x width 700 x 760 mm Number of shafts: 4 of which: 2 cutting shafts Bolq Srtjwf H Hbexswl Number of cutting discs: 37 Number of clearing discs: 37 Shaft speed: 25 rpm Drive power: 2 x 11 kW

Condition: used, axle configuration: 3 axles, first registration: 11/2007, Year of construction: 2007, Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Unladen weight: 5,300 kg Bjlqowd I Aze Srtxewl Payload: 37,700 kg GVW: 43,000 kg Width: 247 cm Extendable body: Yes Contact Bastien Begemann or Corné Visser for further information.

Condition: good (used), Year of construction: 1994, For sale are two Weishaupt dual-fuel oil/gas burners in very good condition (1750 kW) with control cabinet and gas train. Weishaupt GL 7/1-D Model: ZMD Year of manufacture: 1994 Output: 300 - 1750 kW Bolowgk A Asq Srtxewl 25 - 147 kg/h

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Bwjlq Srtsp U Umkjxol

Condition: like new (used), Functionality: fully functional, Year of construction: 2024, MA-0008: LIFTING DOORS for TRUCKS AND VANS for sale, brands D HOLLANDIA and ZEPRO, for 1,000 kg and 1,500 kg. The dimensions of the complete platforms are 2.60 m wide and 1.60 m high, and the half-plate platforms are 1.20 m wide, 1.60 m high approximately. They are in perfect condition!! Bwolq Seuubz Nertxjl

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Bwelqswhcfxe Srtxjl Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: excellent (used), Functionality: fully functional, mileage: 1,035,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, color: blue, axle configuration: 4x2, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: air/air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, sleeping cabin, spoiler, MAN TGX 18.580 D 38 Full-Air -first picture: 03/2019 -Km: 1,035,000 -Retarder: Intarder -ADR AT -Stationary climate -Navigator -Led headlights -Double tank -Double bunk -50% tires IN OTHER LOCATIONS OF OUR GROUP WE ARE OFFICIAL MERCEDES-BENZ DEALERS D.E. TRUCK S.P.A. NAPLES HEADQUARTERS (NA) DOMENICO ESPOSITO S.P.A. EBOLI HEADQUARTERS (SA) OFFICIAL DEALER FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS DOMENICO ESPOSITO S.P.A. HEADQUARTERS EBOLI (SA),NAPLES (NA) - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS DOWN PAYMENT 0 TEL. -0823 1686306 -335 6713062 -377 7064530 HEADQUARTERS OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 Bjlqewgy H Re Srtxowl The company Domenico Truck srl declines all responsibility for any discrepancies in technical equipment, optional and characteristics that could in some cases differ from the elective reported in the description. We invite you to check the characteristics of the specific vehicle. WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-TIPPING CRANE-4 Axles-4 Axles - rear-tway-T-Way-540-460cv-Xway-X-Way-trilateral - V8 - Scania - Frost Edition TARPAULIN-BOX-TAIL LOADER AND-FRIDGE BOX- INSULATED WITH FRIDGE - VAN

Condition: good (used), Year of construction: 2008, Crack testing machine Manufacturer: K+D Flux-Technic Type: Universal 4000 ACC Year of manufacture: 2008 Bjlq Srsvmzm Hetxswl Clamping length: 4,000 mm Test diameter: approx. 400 mm Workpiece weight: 2,400 kg Workpiece handling: minimum 200 mm 170425ä

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm Bjlq Srtjhhyitsxswl length 450 mm 40 pieces in a package 6 packages available 95 Euro per package

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.10 E -Class: 8502 -Price: per piece -Number: 26 pieces Bwjlod Sp I Aoq Srtxol -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: new, Year of construction: 2025, You can call us 24/7 for vibrating screen system for sale Our vibrating screen systems make your production processes more efficient by combining high performance and durability. Our CVS-1240, CVS-1640, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 and CVS-2470 models offer options suitable for your needs with different layer numbers and sizes. Each model provides maximum efficiency with the number of layers ranging from 2 to 4 and large production capacities. Our vibrating screen systems meet all your production needs with production capacities ranging from 70 t/h to 336 t/h. For example, our CVS-1240 model has a production capacity of 70 - 95 t/h with its 1,200 x 4,000 mm layers and operates with only 7.5 kW motor power. Our other models draw attention with their higher capacities and different motor powers. Especially our CVS-2470 model can produce up to 336 t/h with its 2.400 x 7.000 mm layers and double motor power. Dppwiv Each of our vibrating screen systems offers you a long-lasting use with their durable structures and high capacities. With weights from 7,400 kg to 24,000 kg, they are robust and reliable. It allows you to increase your production capacity while reducing your costs with both high efficiency and low energy consumption. Our vibrating screen systems have the capacity to screen all kinds of materials quickly and effectively. They are designed to optimise your production processes, increase productivity and reduce costs. Each model offers flexible solutions with various layer options and production capacities. It operates smoothly for many years with its high quality and reliable performance. Our products offer you the best results by combining superior engineering and innovative design. Make a difference in your production processes with our vibrating screen systems. Bslq Ssuf D Hbjrtxowl

Condition: good (used), load capacity: 2,500 kg, Tehag welding turntable hydraulically height-adjustable, 2.5 tons load capacity used good condition with hand and foot remote control diameter of the clamping disk 1550mm Bwjlq Srtet Uzkdexol speed infinitely variable from 0.01 to approx. 1.5 rpm Height horizontal min. 1400mm Height tilted min. 1200mm Height tilted max. 1800mm Travel height adjustment 600mm Length 2600mm Width 1600mm

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Bslqovllxdo Srtxjwl Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Bjlq Sjd Tqaljrtxjwl - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 3,25 mm length 350 mm Bwslq Srohhyizotxjl 120 pieces in package 2 packages available 95 Euro per package

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Bolq Ssfdkb Tortxewl - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Bwjlq Srtjfdkb Uexsl - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Bwslq Srtefdkbhexol According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth Bslqed Tbbds Srtxewl - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Bwslq Srjguk Dkjtxsl - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Bwelq Sreguk Dvstxsl The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.