Used Isal Pb120 D for sale (8,614)

Condition: used, Luenette Dusb E Tb Eocrcxpjgst Height without foot 350 mm Diameter 140 mm Foot width 40 mm

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, FILMEX Film Extrusion Lines - Cast Film Type: FILMEX 5 1500 / 2100 Manufacturer: W & H Year / MR: / 2014 Price: Contact us for price. Parameter: Number of layers:5 Film structure: A-B-C-D-E Description: EN: The machine is in very good technical condition, under power, possible to test it. The price of a new machine was 2,500,000 EUR Extruder 1 Layer ref: : A Screw diam 1:120 Extruder 2 Layer ref: : B Screw diam 2:50 Extruder 3 Layer ref: : C Screw diam 3:70 Extruder 4 Layer ref: :D Screw diam 4:50 Extruder 5 Layer ref: : E Screw diam 5:70 Main description: Automatic with external wooden deck 1800mm The extrusion unit is movable in 2 directions for better maintenance. The extrusion units have safety handrails and ladders for better access and production control. 1.Extruder Automatic material feeding system 5 sets Alarm before stock runs out - 5 sets Thread diameter: 3 sets, set ceramic heated Heating Ceramic unit with digital temperature adjustment 2.Casting Cooling main cooling cylinder aluminum surface - 1 set control motor: speed control Additional cooling cylinder motor control, speed control Drive cylinder 3.Film thickness control 4.Ionization unit - corona 5.Winding system traction rollers resistant to corrosion traction motor automatic cutting system automatic winding system - friction system winding motor Dob Eev Azk Ds Tb Egjut

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K Dueb E Tb Ejwgd I Eegot - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR Deb E Tswf Dzveb Egsut External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2008, Description - 3x guide channel D 46, 66 + 86 mm Dujbslf H Ras E Tb Egjt - Length of slide XXL, outlet 2,045 mm - Centering device - optional capacity of the loading magazine 8-80 mm - Max. bar length 3,800 mm - Support surface 3x 600 mm - Shifting device by 600 mm - separate switch cabinet - Weight approx. 1,600 kg - Dimensions LxWxH: 5,100x1,270x1,300 mm

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing Duob E Tbewgwl Dj Egjt General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: like new (used), Item: D-7033-Elevator Elevator with plastic conveyor, Stainless Steel support structure, Dimension: Length: 2000 mm, Approach H.: 250 mm Discharge H.: 1050 mm, Width: 250 mm Flight H.: 30 mm Distance: 250 mm Debeitk D Aj E Tb Egjut

Condition: good (used), axle configuration: 3 axles, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, first registration: 10/2021, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy Wheels = Remarks = Number of axles: 3, Tare weight: 8545 kg, Gross weight: 39000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Body year of construction: 2021, Engine manufacturer: Carrier, Engine model: Vector1550, Engine: Diesel/electric, Electric engine hours: 3485, Diesel engine hours: 2652, Wall thickness: 45 mm, Axle type: SCHMITZ, Carrier D+E, double-decker, Alcoa = Additional information = General information Cab: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tire profile: 12 mm; Right tire profile: 11 mm Axle 2: Left tire profile: 3 mm; Right tire profile: 5 mm Axle 3: Left tire profile: 13 mm; Tire tread right: 16 mm Dimensions Dimensions (L x W x H): 1410 x 260 x 400 cm Weight Curb weight: 8,545 kg Payload: 30,455 kg GVW: 39,000 kg Functional Engine: Diesel and electric (2,652 operating hours diesel; 3,485 electric) Wall thickness: 45 mm Dueb E Tjwfw Enob Egst Environment Emission class: Euro 0 Maintenance General technical inspection (MTI): inspected until December 2025 Condition Technical condition: Good Visual condition: Good Damage: Damaged vehicle (not roadworthy) = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm Dujb E Tswgd Ixjb Eget - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR Deb E Tjwf Dh Nsb Egjut This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle mount MT 5 Throat 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Dsb E Tjtwzk Djb Egsut Column diameter Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Feed • Right-to-left travel • Motorized up and down travel • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Dusb Eovtgn Ne Tb Egst Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), Item: D-8705-SS roller transporter Stainless Steel roller conveyor without engine, Stainlless Steel support Structure Plastic Rollers Dimension: L 250 cm x W 54 cm x H 87 cm Dob E Tboitk Dxe Egsut

Condition: good (used), axle configuration: 3 axles, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, first registration: 11/2021, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy Wheels = Remarks = Number of axles: 3, Tare weight: 8545 kg, Gross weight: 39000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Body year of construction: 2021, Engine manufacturer: Carrier, Engine model: Vector1550, Engine: Diesel/electric, Electric engine hours: 3146, Diesel engine hours: 2690, Wall thickness: 45 mm, Axle type: SCHMITZ, Carrier D+E, double-decker, Alcoa = Additional information = General information Cab: Day License plate: KLEYN1 Dujb E Towfw Ehob Egst Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tire profile: 10 mm; Right tire profile: 9 mm Axle 2: Left tire profile: 13 mm; Right tire profile: 13 mm Axle 3: Left tire profile: 4 mm; Tire tread right: 15 mm Dimensions Dimensions (L x W x H): 1410 x 260 x 400 cm Weight Curb weight: 8,545 kg Payload: 30,455 kg GVW: 39,000 kg Functional Engine: Diesel and electric (2,690 operating hours diesel; 3,146 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Maintenance General technical inspection (AIT): inspected until November 2025 Condition Technical condition: good Visual condition: good Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing portfolio • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg Duobswgd Irj E Tb Eget - Connected power: 2.5 kW

Condition: excellent (used), Multifix base body D 1 with 9 interchangeable inserts Stock number (28617) 2 x D 65 x 180 Dob E Tbjwf Afyo Egsut 2 x D 50 x 180 3 x D 40 x 180 1 x J 63 x 180 1 x H 63 x 180 1 x sleeve 63 x MK 5 (L 563) Weight 100 kg

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm control Heidenhain TNC 426 tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,2 t In our opinion, the machine is in very good condition and can be viewed under power by appointment. The chuck on the 4th axis and on the table are not included in delivery. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe Dujbewf D Atj E Tb Eget Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 Dusb Eoihh Spo Tb Egot inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: good (used), axle configuration: 3 axles, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, first registration: 11/2021, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy Wheels = Remarks = Number of axles: 3, Tare weight: 8545 kg, Gross weight: 39000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Body year of construction: 2021, Engine manufacturer: Carrier, Engine model: Vector1550, Engine: Diesel/electric, Electric engine hours: 4060, Diesel engine hours: 2305, Wall thickness: 45 mm, Axle type: SCHMITZ, Carrier D+E, double-decker, Alcoa = Additional information = General information Cab: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tire profile: 12 mm; Right tire profile: 11 mm Axle 2: Left tire profile: 12 mm; Right tire profile: 13 mm Axle 3: Left tire profile: 11 mm; Tire tread right: 10 mm Dueb Eowfw Dws Tb Eget Dimensions Dimensions (L x W x H): 1410 x 260 x 400 cm Weight Curb weight: 8,545 kg Payload: 30,455 kg GVW: 39,000 kg Functional Engine: Diesel and electric (2,305 operating hours diesel; 4,060 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Maintenance General technical inspection (AIT): inspected until November 2025 Condition Technical condition: good Visual condition: good Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing portfolio • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2022, tank 1.300 l Dsb E Tjwgd Iljb Egsut Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, output 7800 kVA voltage 6300 V turning speeds 1500 U/min frequency 50 Hz 0,8 Overspeed 1800 U/min Nominal current 715 A In our opinion, the system is in good used condition and can be inspected live by appointment. The system consists of: Djb E Tbewf D Amo Egout - Gas turbine, Turbomach, Solar Turbines - Waste heat boiler, Wulff - Economizer, Wulff Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) Dsb E Tb Ejwf Rgfsgeut - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: used, Year of construction: 2002, max. wheel diameter 130 mm gear width 25 mm max. module 3 min. module 0,5 work-spindle diameter 85 mm strokes - infinitely variable 500 - 2500 Hub/min Dsb E Tev N Ra Ijb Egout stroke 30 mm The machine is incomplete and is being sold as a spare parts carrier. The following parts are not included in delivery: - Counter-holder unit - Siemens PCU50 - Hydraulic unit - Workpiece clamping - Chuck See photos for scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, x-travel 500 mm y-travel 400 mm z-travel 400 mm table dimension - longitudinal 800 mm table dimension - cross 650 mm Deb Eewf Rf Uj Tb Egeut weight of the machine ca. 850 kg dimensions of the machine ca. 1,1 x 0,9 x 2,4 m Measuring Machine MITUTOYO EURO-M 544 - incl. Probe Renishaw MH20i - incl. PC Workstation (Windows 7 Pro) - MCOSMOS V4.1 Release 4

Condition: used, workpiece length - min. 300 mm workpiece length - max. 1000 mm working lenght 250 - 950 mm clamping diameter 130 mm Inner diameter of milling head 230 / 280 mm Dujbov N N U Re E Tb Egst cutting speed 120 / 160 m/min x-axis 300 mm y-axis 300 mm z-axis 1085 mm electr. connected load 3x400V / 50Hz installed capacity: 130 KVA current intensivity max. 185 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 8 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!