Used Isal Pb120 E for sale (5,978)

Condition: excellent (used), Functionality: fully functional, year of last overhaul: 2025, DGUV certified until: 06/2026, LCM Model: 25 TP Temperature controller with chocolate pump - For pouring, filling, or coating Fgjb E R Dyewhai Ie Tob - Stainless steel design - Tabletop unit - With manual controller - Tempering unit with water bath heating - Adjustable from 20 to 50°C - 25-liter container - Plug-in ready Connection: 220V, 600 watts Used machine, cleaned Option: Maintenance contract E-box Instructions & commissioning Visit our large bakery machine warehouse!

Year of construction: 1994, operating hours: 4,268 h, Condition: used, Drive: Track Height: 306 cm Serial number: 2MJ01806 Condition undercarriage: 75% Fgjb E R Doupfiasy Teb Caterpillar D6E Welding Tractor, E-rops cab, Non-electronic Cat 3306DI engine with 155HP (116kW), Hiab 045 crane, bottle rack, rear platform, welding equipment not included, 3 speed powershift transmission, undercarriage on average 75% remaining, 510mm pads, CE Marked. Machine has low hours, is fully serviced, new paint and is in very clean condition. Machine is available for sale or rent, subject to terms and conditions. Delta Machinery offers a wide range of pipeline equipment for sale or rental, please check our website for actual stock.

Condition: good (used), mileage: 725,913 km, power: 309 kW (420.12 HP), first registration: 04/2014, fuel type: diesel, color: other, axle configuration: 6x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 4,350 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2014, Equipment: ABS, air conditioning, crane, cruise control, = Additional Options and Accessories = Fjbewgicze E R Dy Tsgb - Digital Tachograph - Tachograph (Control Unit) - Power Take-Off - Pump - Slide Valve = Remarks = Number of axles: 3, Configuration: 6x2, Tare weight: 13,735 kg, Gross weight: 26,000 kg, Total fuel capacity: 400 liters, Fifth wheel height: 119 cm, Fifth wheel: Slide Valve, Number of locks: 1, Suspension type: Air suspension, Cruise control, Tachograph (Control Unit), Digital tachograph, Air conditioning, Color: Multicolored, Engine manufacturer: Iveco, Engine power: 309 kW (414 Hp), Euro: 5, Transmission type: AS-Tronic, Gears: 12, Power steering, ABS, Power take-off, Pump, Crane, Crane manufacturer: FASSI E-230XP, Crane year of manufacture: 1995, Crane load capacity: 23, Maximum load: ?, Number of support columns: 4, CE-approved, Control position: Side control on the left, Remote control, Crane position: Behind the cab, Pushable: 4, Additional hydraulic connection: None, Load hook, Crane winch, FASSI F235 AXP (1995 YEAR) WITH REMOTE AND WHINCH = Further information = Drivetrain Engine brand: IVE Transmission Transmission: 12-speed, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Left tire profile: 5 mm; Right tire profile: 9 mm; Suspension: Leaf spring Axle 2: Tire size: 385/65R22.5; Lift axle; Steered; Left tire profile: 7 mm; Right tire profile: 8 mm; Suspension: Air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Tire tread depth, left inner: 8 mm; Tire tread depth, left outer: 8 mm; Tire tread depth, right inner: 7 mm; Tire tread depth, right outer: 8 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 685 x 255 x 390 cm Weights Unladen weight: 13,735 kg Payload: 12,265 kg GVW: 26,000 kg Functional Crane: FASSI E-230XP, built in 1995, behind the cab Pump: Yes Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), Year of construction: 1992, Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Manufacturer: Reinecker Type: WZS-50 CNC Control Unit: Siemens Sinumerik 880G Year of Construction: 10/1992 Including extinguishing system Including various accessories Travel axes: X – Y – Z – C – E Interface Type: E32R Weight: 3000 kg Space required approx. (L x D x H): 3 m x 3 m x 3 m Fgjbowhqu Us E R Dy Tob Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex-stock, plus VAT. Condition: good - ready for demonstration Delivery: ex-stock - as seen Payment: net - upon receipt of invoice Subject to prior sale, errors excepted. We welcome your order. Additional machines and systems are available from stock – please inquire. We look forward to hearing from you.

Year of construction: 2022, Condition: used, Used machine Year of manufacture 2022 Condition: like new, still in original packaging Image shows an example of the system Features and technical specifications: JumboErgo vacuum tube lifter With the JumboErgo vacuum tube lifter, both light and heavy loads can be moved quickly and precisely. Load capacity: 140 kg Consisting of: 1 x direct-drive vacuum blower for tube lifter applications Type: SBL-260-520-IE3-TYP1 Size: L Suction capacity (50 Hz): 260 m³/hm Vacuum (50 Hz): -520 mbar Rated power (50 Hz): 4 kW Version: IE3: EU/CN/IND Sound pressure level (50 Hz): 74 dB Voltage (50 Hz): D230V/Y400V ±10% Voltage (60 Hz): D265V/Y460V ±10% Approval: UR or UL or CSA Protection class: IP 55 - Powerful blower with optimal characteristics for tube lifter applications - Accessories: Vacuum safety valve and exhaust silencer - The device is mounted using a base for floor, wall, or column mounting. (Mounting hardware not included) - Safe handling even with porous workpieces - Electrical design according to VDE, UL, and CSA The installation of a dust filter in the suction line is strongly recommended to protect the vacuum generator from any type of contamination. The noise level of the entire system may vary from the vacuum generator's values depending on the suction cup. Note: Recommendation for on-site circuit breakers: D 230V [50Hz] / D 265V [60Hz] / Y 400V [50Hz]: Type D16 1 lifting unit for Jumbo hose lifter Type: HE-140-1700-230 Load capacity (horizontal): 140 kg Outer diameter: 230 mm Height H: 2920 mm Lifting unit stroke: 1840 mm Color: RAL 7035 Light Gray - Flat, ball-bearing swivel inlet for continuous rotation of the control unit - Suspension eye on the swivel inlet for easy attachment to a crane chassis - Suspension eye diameter: 23 mm - Flexible, robust, and durable multi-layer lifting hose - Safety check valve for slow lowering of the load during Power outage * Since the lifting hose is produced manually, a tolerance of +/- 50 mm in the lifting height must be taken into account. Fob E R Dyjwhukms Tegb 1 x Control Unit for Jumbo Hose Lifter Type: BE-140-750-E-STAR Control Element: Ergo Load Capacity: 140 kg Operating Handle Length: 750 mm Design: Rigid Color: RAL 7035 Light Gray - Rotary handle for ergonomic control of the up and down movement and the lifting speed with and without load - Adjustable floating position without load Due to the length of the operating handle, the use of a spring balancer is mandatory. 1 x Hose for Vacuum and Compressed Air Systems Type: VSL 58-50 15 PVC-PS Outer Diameter D: 58 mm Inner/Bore Diameter d: 50 mm Length L: 15 m Material: PVC, with PVC spiral Installation Radius (min): 170 mm Color: Gray Pressure Range (Operating Pressure): -0.50 ... 0.50 bar Ambient temperature: -40 ... 60 °C 1 dust filter Type: STF 50 P 4.5 SSD Connection: Ø50mm Design: Piclon housing Nominal flow rate: 270 m³/h Filter fineness: 3 μm Additional equipment: SSD hose clamps - Plastic housing with replaceable filter cartridge, including bracket for wall mounting and 2 hose clamps - Total weight

Condition: used, overall weight: 8,358 kg, axle configuration: 3 axles, first registration: 07/2022, Year of construction: 2022, total width: 2,600 mm, total height: 4,010 mm, ID: 8855-290648 All our vehicles and the latest offers - Technical specifications FP 45 SMART. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck, BIO-Diesel proofing. Tires 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unloaded) - 4009mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Fgeb E R Dyov I I S Ee Tob

Year of construction: 2017, Condition: excellent (used), Functionality: fully functional, Shop oven double station Unox model: XFT119 Convection oven for 2 x 3 trays 460 x 330 mm Stainless steel version with exhaust hood Manual control Fixed water connection for steaming Connection 230V 2x Schuko plug, 3 kW Dimensions: 600 x 665 x 1060 mm, WxDxH Used oven cleaned Fgjb Eor Axb No R Dy Teb Option: Water filter Maintenance contract E-box Come to our oven exhibition!

Condition: used, Year of construction: 2023, operating hours: 177 h, load capacity: 6,000 kg, lifting height: 25,900 mm, mast type: telescope, power: 115 kW (156.36 HP), fork carriage width: 1,110 mm, ground clearance: 360 mm, front tire type: Aeolus, front tire size: 445/65R22,5, rear tire type: Aeolus, rear tire size: 445/65R22,5, total length: 9,280 mm, wheelbase: 3,050 mm, engine type: Yanmar 4TN107FHT-6SMU1, drive type: Diesel, arm reach: 21,700 mm, construction width: 2,500 mm, net weight: 18,000 kg, MANITOU MRT 2660 360 160Y ST5 S1 Drehbarer Teleskoplader Dieselmotor Anbaugeräte auf Anfrage Technische Daten der Maschine: max. Tragkraft: 6.000 kg Tragfähigkeit bei max. Ausladung: 300 kg (Maschine auf Rädern) Hubhöhe Teleskoparm: 25,9 m max. Reichweite: 21,7 m Baubreite: 2,5 m Bauhöhe: 3,1 m Bodenfreiheit: 0,36 m Oberwagen: gelagert auf doppeltem Drehkranz mit Innenverzahnung, Drehsystem mit Negativbremse, Fgeb E Rjvg Rp Rj Dy Tsb endlos drehbar 360° Bereifung vorne/hinten: 445/65 R22.5 TLAG P23 AEOLUS Motor: YANMAR - EU STAGE V, Typ 4TN107FHT-6SMU1 wassergekühlt 4 Zylinder, 156 PS / 115 kW, 4567 cm³ Antrieb: Speedshift-Steuerung und Hydrostat von Danfoss 2-Gang Dana 367N Synchronisationsgetriebe Fabr. Bosch-Rexroth hydrostatischer Antrieb mit automatischer Leistungsregulierung, 2 Geschwindigkeiten, elektromagnetische Schaltung, automative Bedienung und Incheinrichtung, Allradantrieb Achsen: verstärkte Vorder- und Hinterachse mit Planetenantrieb im Endantrieb, Doppel- gelenken für engen Wenderadius (Radeinschlag) an Vorderachse +/- 8° (15%), Hinterachse pendelnd mit automatischer hydraulischer Sperrung bei der Drehung +/- 7,5°, seitlicher Niveauausgleich +/- 7° Bremsen: Ölbad Lamellenbremse mit Bremskraftverstärkung an Vorder- und Hinterachse Parkbremse: automatische negative Parkbremse Lenkung: 2-Rad Lenkung, 4-Rad Lenkung, Kriechgang Hydr. Steuerung: elektroproportionale, feinfühlige Steuerung über 2 Joystick, Kreuzsteuerhebel links und rechts vom Fahrersitz Stützen: einfache Teleskop-Abstützung, Stützenbefehle einzeln oder gleichzeitig steuerbar Sicherheitseinrichtung: optisches und akustisches Signal und automatische Lastabschaltung, Sicherheitsventile und Schlauchbruchsicherung an Hub-, Neige-, Teleskop- und Abstützzylinder, Lastkontrollsystem zur Überwachung der Resttragkraft, hydr. Last- Moment-Abschaltung Zugkraft: 8700 daN Eigengewicht: 18.000 kg Serienmäßige Ausstattung: - auf Gummi-Silentblöcken gelagerte neue Druckkabine mit Heizung und Lüftung (Kabine entspricht den Normen ROPS und FOPS Stufe 2) - 3 zusätzliche Einstiege im Rahmen - Easy Step (einfacher Einstieg) - LED-Scheinwerfer am Kabinenzugang (Türlicht) - Mechanisch gefederter Stoffsitz - Verstellbare und teleskopierbare Lenksäule - Frontscheibenwischer und Heckwischer mit Scheibenwaschanlage - Multitouch-Farbdisplay an der Armlehne montiert (höhenverstellbar) - übersichtliches Armaturenbrett mit Betriebsstundenzähler, Temperaturanzeige für Kühlwasser, Verstopfungsanzeige für Hydrostat- und Luftfilter, Ladekontroll- und Öldruckanzeige - Sonnenblende an Dachfenster und Windschutzscheibe - Einteilige Windschutzscheibe bis zum Dach - Innenrückspiegel - Elektrischer Spiegel links und rechts mit Entfrostung - Rückfahrkamera - StVZO Straßenbeleuchtung - Rundumkennleuchte orange - Rote LED-Alarmblinkleuchte - Weiße LED-Blinkleuchte bei Betrieb über Fernbedienung - Batteriehauptschalter - Batterie 2x12V - 180 A/H -1200A - Rücklaufleitung zum Hydrauliktank - Hydraulikleitungen für Zubehör am Teleskopkopf mit Schnellkupplungen - programmierbarer Arbeitsbereich - Reduzierung der Geschwindigkeiten bei Bewegungen - Rückfahrwarnsignal - Automatische Nivellierung der Abstützung - Automatische Radausrichtung - Bühnenvorbereitung inkl. Funkfernsteuerung - automatische Anbaugeräte-Erkennung E-Reco (soweit vom Anbaugerät unterstützt) - TÜV Vorbereitung als selbstfahrende Arbeitsmaschine 20 km/h oder 40 km/h - Easy Link Standard Modul

Condition: used, Year of construction: 2019, Additional title: vertical stainless steel tank Capacity approx.: 41 hl Operating pressure: 3 bar Operating temperature: 50 °C Weight: 900 kg Material: stainless steel Fgeb E Revcqpps Dy Tsb Position: vertical Base construction: 4 x height-adjustable feet Features: Resistance thermometer (E+H); safety valve; vacuum valvel; manway in side wall; sampling valve

Condition: used, Year of construction: 2019, operating hours: 12,568 h, Empty weight: 38.630 kg Dimensions (LxBxH): 890 x 395 x 403 cm Chassis type: rigid Fgeb E Rswgh U Nj Dy Tob Serial number: 106 Condition undercarriage: 30% Caterpillar 772G Quarry Truck, 3.972 Idle hours, 8.596 Actual working hours, E-rops cab with A/C, 6 cylinder turbocharged Cat C18 engine with 598HP (446kW), EPA Compliant, Tier 4 Final/EU Stage IV, automatic 7-speed powershift transmission, max speed 79,2 km/h, automatic lock-up torque converter, automatic retarding control, flat floor body with body liners, target gross operating weight 82,100 Kg, empty machine weight 38,630 Kg, nominal payload class 46.8 Tonnes, body capacity 31.2 M3, 21.00R33 tyres, central grease system, front and rear work lights, rear view camera, CE marked. Machine comes straight out of work and is in very clean condition. Inspections are welcome.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, tool mount: 40 mm, 3-axis machining center Manufacturer: DMG Series: DMU-80P Year of manufacture: 1999 Control type: Heidenhain TNC-430 Switch-on hours: approx. 95,900 h Program run: approx. 28,100 h technical data: ----- - Travel X-Y-Z: 800 x 700 x 600 mm - Work table: 900 x 630 mm - Spindle max.: 12,000 rpm - Swivel head H/V - Tool holder: SK40 - Tool magazine: 30x / chain - Coolant system - Central lubrication Feb E R Dorqhbbey Togb - SpäFö - Weight: approx. 9.2 t Accessories: ----- - Manuals - 3D workpiece probe TS-641 Remarks: ----- - FEB 2023: new spindle + kinematics - FEB 2023: new E-module 36kW - APR 2023: new AC servo inverter - DEZ 2015: General overhaul - Machine absolutely true to size!

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 1,200 kg, lifting height: 3,600 mm, mast type: telescopic, construction height: 2,458 mm, fork length: 1,150 mm, total length: 1,698 mm, drive type: Lithium-Ionen, construction width: 800 mm, net weight: 639 kg, Pedestrian stacker Load center of gravity: 600 Fork width: 170 mm Fgjbou D S I Te E R Dy Tjb Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New machine Technical condition: New Front tires type: Vulkollan Rear tires type: Vulkollan Battery Volt: 24V Battery Ah: 60Ah Battery manufacturer: Manitou Battery type: Lithium-Ion Battery year of manufacture: 2023 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Pulse control, CE certificate, lithium-ion technology,

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit Fsb Eewhfb Ns R Dy Tegb SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Fgsb E R Dyowhi Slj Tsb Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Year of construction: 2019, Condition: used, Capacity approx.: 31000 l Operating pressure: 3 bar Operating temperature: 50 °C Length: ca. 2800 mm Width: ca. 2800 mm Fgebjvcq Ewe E R Dy Teb Height: ca. 8000 mm Weight: 4500 kg Material: stainless steel Position: vertical Base construction: 4 x height-adjustable feet Features: Cooling: cone and side wall; insulation; hydrostatic pressure sensor Deltapilot M (E+H); sampling valve; 3 x PT 100, swivel cone

Condition: used, Year of construction: 2016, operating hours: 6,593 h, Empty weight: 37.780 kg Fjb E R Dyjwga Syo Tsgb Dimensions (LxBxH): 1137 x 319 x 385 cm Serial number: 148 Condition undercarriage: 85% Caterpillar 336FL Demolition Excavator, Made in Belgium, 2.341 Idle hours, 4.252 Actual working hours, E-rops cab with A/C, front cab guard and FOPS, 6 cylinder turbocharged Cat C9.3 ACERT Technology engine with 316HP (236kW), Tier 4 Final/EU Stage IV emission, EPA Compliant, straight boom, check valves, 3.90 Mtr stick length, hydr. quick coupler, hammer lines, Heavy Lift, extra aux. hydr. function, refurbished GP Cat bucket with new Esco teeth, UC on average 85% remaining, New sprockets, 600mm track shoes, work lights, rear and side view camera, operating weight 37,780 Kg, CE marked. Machine has low hours, comes straight out of work and is in clean condition. Inspections are welcome.

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Equipment: safety light barrier, Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: cca. 1991 Stroke length: 80mm Distance above table: (adjustable) 190-250mm Table size: 810x360 Bear size: 410x350 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Fgsb E R Dyju D Hkcj Tob Net weight: 3600kg Size: 980x1480x2275mm Automatic greasing system. Optionally with sheet feeder and straightener.

Condition: ready for operation (used), Philips 4022 226 3632 LM / RM DRIVE MOD card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Feb E R Dyoi Echgs Togb

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central module E Stand 4 , software version V5.2.0 , serial no. according to photo as new, professionally tested, 100% functional, scope of supply according to photos Fjbei Eduge E R Dy Tsgb

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel E-Stand: 22 SN:C-F4C01265, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos Fgjb E R Doi Edctsy Tsb

Condition: new, Siemens VIPA SSN-BG81A module, E-Stand 24, unused, in original opened packaging, 100% functional Fsbeudrkxs E R Dy Tjgb

Condition: new, Siemens 6FX1138-6BL01 PLC 135WB/ACOP, 256KB RAM E-Stand: C SN:1359 ,unused in opened original box, 100% working, scope of supply according to photos Fjbei Ed S Ee E R Dy Tjgb

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central module E Stand 4 , software version V5.2.0 , serial no. according to photo as new, professionally tested, 100% functional, scope of supply according to photos Fjb E R Doi Eduney Togb

Condition: new, Schneider Automation TSX A25 KPE 141-1 MMS Ethernet controller, E status and serial no. according to photo, unused in opened original packaging, 100% functional, scope of delivery according to photos Fsb E R Doi Ec Hzoy Tegb

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel E-Stand: 19 SN:C-C3G26586 , professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery according to photos Fgsbei Edcls E R Dy Teb