Used Nilfisk-Alto Floortec R360 P for sale (2,586)

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe brand: TORNOS type: SAS16 new in: 1988 equipped with: sub spindel threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P Fgob Haevwmb Dob Elsb

Condition: used, Year of construction: 2007, Used Case Packer Apsol MCP2 3500 bph Fgeb Haowimnaob Eljb General Features of the Used Case Packer Apsol MCP2 3500 bph APSOL built the Used Case Packer Apsol MCP2 3500 bph in 2007 as an automatic case packing machine for glass bottles. This model ensures reliable operation and supports a wide range of packaging configurations. Consequently, high-efficiency bottling lines can easily integrate this unit, as it remains fully operational and ready for use. In addition, its compact design allows manufacturers to optimize floor space without compromising performance. Performance and Format Configuration The Used Case Packer Apsol MCP2 3500 bph processes up to 3500 bottles per hour, maintaining consistent output even under demanding production schedules. Specifically, it handles bottles in 0.50 L, 0.75 L, and 1 L formats, packed in 4×3 and 3×2 case layouts. Therefore, operators can switch between formats with minimal downtime. As a result, the machine offers remarkable flexibility for producers of wine, oil, and other glass-bottled liquids. Moreover, the system supports both small and medium production batches, which adds to its versatility. Gripping System and Number of Heads The gripping system uses bell-shaped suction heads with air chambers, which apply pneumatic pressure to move glass containers gently. This way, the machine prevents damage during the pick-and-place process. Notably, it features two gripping heads operating in parallel, which significantly increases throughput. Additionally, the dual-head system distributes workload evenly, thereby enhancing mechanical longevity. In particular, this setup proves effective when handling fragile or tall bottles. Automation and Control System OMRON and TOSHIBA programmable logic controllers (PLCs) control the Used Case Packer Apsol MCP2 3500 bph, ensuring high automation reliability and ease of maintenance. Furthermore, technicians can quickly configure parameters thanks to the intuitive interface. Because of this, the machine adapts smoothly to diverse production scenarios. Operators access the control interface on the right-hand side, which improves ergonomics and reduces operational fatigue. Equally important, the PLC architecture allows remote diagnostics and rapid intervention in case of faults. Safety, Dimensions, and Power Supply The machine includes safety guards that comply with European regulations, thus ensuring operator protection. To illustrate, it features interlocked doors and emergency stop systems. It measures 3000 mm in length, 2400 mm in depth, and 2500 mm in height. In terms of energy, the unit operates on a 400 V, 50 Hz power supply and consumes 11 kW. Altogether, these features make the Used Case Packer Apsol MCP2 3500 bph a robust and scalable choice for mid-to-high-capacity bottling lines. Ultimately, the model combines mechanical reliability with flexible automation, making it a strategic investment for modern facilities.

Condition: used, Year of construction: 2017, Serial number: W09STTM3NHEN1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18975 Specifications: - 2017 model - 3 axle - Turn on 3 axles - Hydraulic kj rebruer - Extraction at 5.5 metres - Internal length on 1 stage: 4,413 m - Internal length p 2 stage: 8,887 m - Total internal length: 13,281 m - Internal width: 2,511 m - Tires (see pictures) - Light - Cupboard space - Ready for delivery Fjb Hab Eevgyfzologb Description: 2017 HRD 3 axle machine trailer for sale. Everything works as it should according to the previous owner. There is a turn on 3 axles and an extension of 5.5 metres. Ready for delivery Technical approved: Yes EU-approved until: 08.01.2026 Own weight: 11940 Total Weight: 52900 Payload: 40960 Width: 255 Length: 1375

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Fgjb Habsk E Htcs Elob Altogether 15 geared motors and 12 pieces frequency inverters available !!! Very good condition, directly from production!!!

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 640 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 3,000 mm, spindle speed (max.): 42,000 rpm, distance table center to spindle nose: 450 mm, space requirement length: 2,400 mm, space requirement width: 2,370 mm, CONTROLS .. CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 640 mm .. Y-axis travel: 250 mm .. Z-axis travel: 400 mm .. rotating range B-axis from: 105 ° .. rotating range B-axis up to: -105 ° .. rotating range C-axis from: 0 ° .. rotating range C-axis up to: 360 ° .. distance spindle nose - table surface (max.): 450 mm TABLE .. workpiece load (max): 60 kg SPINDLE / HEAD .. spindle revolutions (max): 42000 /min TOOL MAGAZINE .. number of positions: 90 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2400 mm .. space requirements -front/back-: 2370 mm .. total height: 3000 mm ATTACHMENTS .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Machine equipment: - Accuracy package Feb Hab Ejvzbffslsgb - Workpiece magazine for 36 ITS pallets 50/148 - Renishaw OMP 400 (measuring probe) - MHT media distributor table chuck PowerChuck P Ø150 Tool measurement BLUM Infrared probe Renishaw OMP400 Medium distributor MHT with 3 dosing settings Thermal package / Accuracy package Kinematic-Opt incl. calibration pallet ball 30mm Dynamic Collision Controller (DCM) Z-axis compensation Fault indicator exo-call Remote diagnostics exo-net 1 network connection Hand control bar HSCI FS Additional light for working area Pressure amplification for chuck

Year of construction: 2022, Condition: used, Used machine Year of manufacture 2022 Condition: like new, still in original packaging Image shows an example of the system Features and technical specifications: JumboErgo vacuum tube lifter With the JumboErgo vacuum tube lifter, both light and heavy loads can be moved quickly and precisely. Load capacity: 140 kg Consisting of: 1 x direct-drive vacuum blower for tube lifter applications Type: SBL-260-520-IE3-TYP1 Size: L Suction capacity (50 Hz): 260 m³/hm Vacuum (50 Hz): -520 mbar Rated power (50 Hz): 4 kW Version: IE3: EU/CN/IND Sound pressure level (50 Hz): 74 dB Voltage (50 Hz): D230V/Y400V ±10% Voltage (60 Hz): D265V/Y460V ±10% Approval: UR or UL or CSA Protection class: IP 55 - Powerful blower with optimal characteristics for tube lifter applications - Accessories: Vacuum safety valve and exhaust silencer - The device is mounted using a base for floor, wall, or column mounting. (Mounting hardware not included) - Safe handling even with porous workpieces - Electrical design according to VDE, UL, and CSA The installation of a dust filter in the suction line is strongly recommended to protect the vacuum generator from any type of contamination. The noise level of the entire system may vary from the vacuum generator's values depending on the suction cup. Note: Recommendation for on-site circuit breakers: D 230V [50Hz] / D 265V [60Hz] / Y 400V [50Hz]: Type D16 1 lifting unit for Jumbo hose lifter Type: HE-140-1700-230 Load capacity (horizontal): 140 kg Outer diameter: 230 mm Height H: 2920 mm Lifting unit stroke: 1840 mm Color: RAL 7035 Light Gray - Flat, ball-bearing swivel inlet for continuous rotation of the control unit - Suspension eye on the swivel inlet for easy attachment to a crane chassis - Suspension eye diameter: 23 mm - Flexible, robust, and durable multi-layer lifting hose - Safety check valve for slow lowering of the load during Power outage * Since the lifting hose is produced manually, a tolerance of +/- 50 mm in the lifting height must be taken into account. 1 x Control Unit for Jumbo Hose Lifter Type: BE-140-750-E-STAR Control Element: Ergo Load Capacity: 140 kg Operating Handle Length: 750 mm Design: Rigid Color: RAL 7035 Light Gray - Rotary handle for ergonomic control of the up and down movement and the lifting speed with and without load - Adjustable floating position without load Fgob Habjwhukms Elob Due to the length of the operating handle, the use of a spring balancer is mandatory. 1 x Hose for Vacuum and Compressed Air Systems Type: VSL 58-50 15 PVC-PS Outer Diameter D: 58 mm Inner/Bore Diameter d: 50 mm Length L: 15 m Material: PVC, with PVC spiral Installation Radius (min): 170 mm Color: Gray Pressure Range (Operating Pressure): -0.50 ... 0.50 bar Ambient temperature: -40 ... 60 °C 1 dust filter Type: STF 50 P 4.5 SSD Connection: Ø50mm Design: Piclon housing Nominal flow rate: 270 m³/h Filter fineness: 3 μm Additional equipment: SSD hose clamps - Plastic housing with replaceable filter cartridge, including bracket for wall mounting and 2 hose clamps - Total weight

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Fgobsvnh T Nj Hab Elsb Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm Fgsb Haewgwnlob Eljb control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, mileage: 248,000 km, Year of construction: 2017, Field of application: Freight transport Serial number: YV2R0P0D8HA80xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20120 2017 Volvo FH750 6x4 Truck with 2017 Carnehl Tipper Semi and 2008 Nor Slep Tipper Semi Specifications - Truck: Approximately 248,000 km Fgsb Hab Eowdu Tgoljb Transmission: Automatic Tires: Okay Suspension: Steel - Air Engine: Euro 6, 751 hp Tipping semi-hydraulics Retarder Axle: 6x4 Extra light Bed Refrigerator Radio/CD Air conditioning/AC Specifications - 2017 Carnehl Tippsemi: Axles: 3-axle Lift: on 1 axle Tires: See pictures Suspension: Full air Swing: P 3 axle Sliding axles Checkout: See pictures Large King pin Specifications - 2008 Nor Slep Tippsemi: Has a deficiency note Axles: 3-axle Lift: on 1 axle Tires: Quite ok Suspension: Air Needs some repairs Large and regular king pin Description: Volvo FH750 6x4 truck from 2017 is sold with 2 tipper semi-trailers: a 2017 Carnehl Tippsemi and a 2008 Nor Slep Tippsemi. The vehicle is EU-approved  and has driven approx. 248,000 km. It is equipped with automatic transmission, Euro 6 engine with 751 hp, and tipper semi-hydraulics. The trailer from 2017 is EU-approved and in good condition, while the trailer from 2008 needs some repairs and has a defect note on the EU inspection. Km: 248000 HK: 750 Technical approved: Yes EU-approved until: 19.02.2026 Own weight: 10680 Total Weight: 35000 Payload: 24320 Width: 255 Length: 726 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes Fjb Hab Eowhfb Nologb SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: new, Brugger FMP 225 Forestry Mulcher - New, 225 cm working width, ideal for heavy-duty mulching work! The Brugger FMP 225 is a robust forestry mulcher for use in agriculture, forestry, and fallow land. With its dual belt drive, 32 carbide-tipped blades, and hydraulic equipment, it's ideal for tractors with 110 hp and above – reliable, powerful, and ready for tough applications. Technical Specifications – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 hp Weight: approx. 1,800 kg Attachment: Three-point hitch, CAT II / III Italian CMR transmission Rotor shaft diameter: 219 mm (465 mm with blades) Blades: 32, carbide-tipped Working depth: -70 mm / -30 mm / +10 mm (3-way adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for flap, 1x for crop clamp) Equipment: Hydraulic tailgate & crop clamp Included: PTO shaft Prices + VAT: Brugger FMP180 180cm - 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm - 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm - 36 hammers, 1,800kg = €12,900 ----- Fjb Howhyzwsab Eljgb Contact us for a customized quote!

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L705226, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Fjbjvai Swo Hab Elogb Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: ready for operation (used), Hydac OLF-5/4-S-370-N-N5AM002-C filter system SN: 0002S01021 with FCPA171B-4 / 6018870 motor, Hydac VM 2 C.0 pressure switch and FZP-1/3.1/P/71 cooler, used, minor signs of wear, 100% functional, scope of delivery as per photos Fjb Hab Eony Dm Ujljgb

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Fgeb Hab Eev Raatoleb Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Fjb Hewg Hr Toab Eljgb Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article x slanted window control for vertical cylinder Article x pendulum pressure plates attachable for pressing up to 60 degrees Article Double pendulum pressure plate for pointed window (triangle) Article x extension for p...

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 31-44367, Gebr. Horizontal CNC machining center Fsb Habetq Tnme Elogb Make: HELLER Type: MC16 Year of manufacture: 2000 P/N: 31-44367

Condition: new, Brugger FMP 225 Forestry Mulcher - New, 225 cm working width, ideal for heavy-duty mulching work! The Brugger FMP 225 is a robust forestry mulcher for use in agriculture, forestry, and fallow land. With its dual belt drive, 32 carbide-tipped blades, and hydraulic equipment, it's ideal for tractors with 110 hp and above – reliable, powerful, and ready for tough applications. Technical Specifications – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 hp Weight: approx. 1,800 kg Attachment: Three-point hitch, CAT II / III Italian CMR transmission Rotor shaft diameter: 219 mm (465 mm with blades) Blades: 32, carbide-tipped Working depth: -70 mm / -30 mm / +10 mm (3-way adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for flap, 1x for crop clamp) Equipment: Hydraulic tailgate & crop clamp Included: PTO shaft Prices + VAT: Brugger FMP180 180cm - 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm - 32 hammers, 1,700kg = €11,900 Fjb Habswhyw Ee Elogb Brugger FMP225 225cm - 36 hammers, 1,800kg = €12,900 ----- Contact us for a customized quote!

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Dexion Type: P 90 Included in delivery: 1x pallet rack crossbeam, used Material color: Sendzimir galvanized Box profile: 89 x 50 mm Crossbeam type: SLO89|2 Clamp: 5 HK Clear width: 2,800 mm Max. load per pair of crossbeams: 1,400 kg, with evenly distributed load 2x locking pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Fsb Hab Ejwfq Ddelogb General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Hydac OLF-5/4-S-370-N-N5AM002-C filter system SN: MK116904 with FCPA171B-4 / 6018870 motor, Hydac VM 2 C.0 pressure switch and FZP-1/3.1/P/71 cooler, used, minor signs of wear, 100% functional, scope of delivery as per photos Fob Habsny Dnge Elogb

Condition: used, Year of construction: 2022, Sanding width: 1.100 mm Workpiece thickness min: 3 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 1 Hardness grade of roller in ° shore: 85 Sanding pads total: 1 Segmental pressure pad: electronic Segment width: 25 mm Lacquer sanding: Yes Vacuum table: Yes Main motor power: 15 kW Sanding belt length: 1.900 mm Belt speed max: 19 m/s Adjustable sanding belt speed: continuously variable Feedrate max: 18 m/min Continuously variable feed: Yes Blow-off device: Sanding belt Jump-in control: electropneumatically Aggregates with frequency inverters: 1 Fgobjv D T Auj Hab Eleb Configuration of aggregates: r-p Jump-in control: Yes Control: Touchscreen Conformity marking: CE mark Weight: 1.150 kg

Condition: new, The Brugger Grip 130 logging tongs with 3-ton rotator is the ideal solution for efficient logging and handling. logging and handling. These forwarding tongs offer an opening width of 130 cm and are equipped with a powerful rotator that enables precise control and rotation. rotation. The versatile attachment option makes the Grip 130 extremely flexible. It can be easily attached to the rear attachment with three-point linkage or on the front loader with Eur linkage. This adaptability enables effective wood processing in various application areas. areas of application. Feb Haothht Heb Elsgb - Opening width 130cm - 3T rotator can be rotated through 360 - Two double-acting circles are required - Suitable for three-point linkage KAT 2 + 3 - Suitable for Euro mount front loader The robust construction and high-quality workmanship guarantee durability and reliability reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, foresters and anyone who needs a reliable grapple for their woodwork. timber work.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Dexion Type: P 90 Included in delivery: 1x pallet rack crossbeam, used Material color: Sendzimir galvanized Box profile: 100 x 50 mm Crossbeam type: SLB 100|13 Clamp: 5 HK Clear width: 2,800 mm 2x locking pin, used Design: Sendzimir galvanized For securing the longitudinal beams Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Fgobowfmynj Hab Elob General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2023, Functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 13cm - Weight 420kg Foborblwds Hab Elogb - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: new, Year of construction: 2023, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP Fgob Hab Ejrblx Hjlob

Condition: new, Year of construction: 2023, Functionality: fully functional, The Brugger Grip 130 logging tongs with 3-ton rotator is the ideal solution for efficient logging and handling. logging and handling. These forwarding tongs offer an opening width of 130 cm and are Fgsb Hab Esrbidvelob equipped with a powerful rotator that enables precise control and rotation. rotation. The versatile attachment option makes the Grip 130 extremely flexible. It can be easily attached to the rear attachment with three-point linkage or on the front loader with Eur linkage. This adaptability enables effective wood processing in various application areas. areas of application. - Opening width 130cm - 3T rotator can be rotated through 360 - Two double-acting circles are required - Suitable for three-point linkage KAT 2 + 3 - Suitable for Euro mount front loader The robust construction and high-quality workmanship guarantee durability and reliability reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, foresters and anyone who needs a reliable grapple for their woodwork. timber work.