Used Nilfisk-Alto Floortec R360 B for sale (6,719)

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V Fslirahov Dmnwjtegb weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: excellent (used), Year of construction: 2006, operating hours: 21,257 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 200 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 2,200 mm, table width: 380 mm, table length: 500 mm, table load: 200 kg, rotational speed (max.): 18,000 rpm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,257 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Deckel Maho DMU 50 eVo Linear 5 Axis Machining Centre Machine Type: 5 Axis Machining Centre Year: 2006 Control: Heidenhain iTNC530 Spindle On Hours: 21257hrs Condition: Very Good Includes Selection of Tool Holders Swarf Conveyor Electrostatic Oil Mist Filter Rittal Cabinet A/C Unit Technical Specifications Table Dimensions: 500 x 380mm Max Table Load: 200kg X Axis Travel: 500mm Y Axis Travel: 450mm Z Axis Travel: 400mm B Axis Travel: 180 Deg Foliswip Snorahtsgb C Axis Travel: 360deg Spindle Speed: 18,000rpm Spindle Taper: BT40 ATC: 30 Stations Max Tool Diameter: Ø130mm Max Tool Length: 315mm Max Tool Weight: 8kg Machine Dimensions: 2800x2200x2500mm Machine Weight: 6500kg (approx)

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00416, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 260 kg, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant. Fjlirahewh Iybetsgb   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, Year of construction: 2007, Used 2007 Mori Seiki NH 5000- DCG 4-Axis Horizontal Machining Centre with MSX701- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing, in super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new machine having spent its life in a 1st Tier Aerospace sub-contractor. Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 499.1 kg Number of tool pockets 60 Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 Kw Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg Fgolirjvkwlgeahtob Stock number: cmj/0203 Control: MORI MSX-701-iii Accessories: CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing Name of the machine: Mori Seiki NH 5000 DCG / 40 No of pallets: 2

Condition: good (used), Year of construction: 1982, Functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Fsliowid Spsrahtegb Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Year of construction: 2016, centre distance 1000 mm centre height 175 mm x-travel 285 mm z-travel 1150 mm Fgslowh Uhrjirahtjb Control Fanuc 0i-TD feed speed x-axis mm/min feed speed z-axis mm/min workpiece weight max. 120 kg weight of the machine ca. 5,1 t Only 9604 switch-on hours! Equipment/accessories: - Workpiece table can be tilted +8.5° with fine adjustment and pneumatic lift for swiveling Grinding headstock H1 - Swivel axis (B-axis) with Hith toothing 1° Swivel range B-axis -15 °- + 225 ° - Motor spindle 1 Drive power 7.5 kW/1400 - 11 kW/3200 rpm (1400 rpm corresponds to v=37 m/s in relation to grinding wheel diameter 500 mm) - Motor spindle 2 Drive power 7.5 kW/1400 - 11 kW/3200 rpm (1400 rpm corresponds to v=37 m/s in relation to grinding wheel diameter 500 mm) - Passive grinding ring sensor for tool position T2 - Internal grinding device for high-speed spindle diameter 120 mm in tool position 3 HF internal grinding motor spindles Fischer MFM 1242/60 42,000 - 60,000 rpm / 10 kW Workhead - Universal workhead ISO 50/Ø110 mm cylindrical Spindle clearance 50 mm Manual spindle blocking without monitoring - C-axis normal for cylindrical grinding and circumferentially positioned stopping Reference accuracy +/-0.5° Drive with AC servo motor via toothed belt Tailstock - Tailstock with mounting cone MK 4 and 35 mm stroke, quill diameter 50 mm Dressing - Hydraulically swiveling dressing device can be mounted on workpiece table with interface E 01 for mounting a dressing spindle holder - Electrical interface 1 rotary dressing up to 3 kW drive power Balancing - P 6002 operational balancing device for tool head H1 for 1 or 2 external grinding spindles with integrated balancing head - Portable control unit Studer PCU-Terminal II - Grinding detection - Open setting vice - 3 jaw chucks diameter 160 mm - Magnetic chuck diameter 165 mm - Oil mist extraction - Coolant unit with paper belt filter (375L, 6 bar) - div. external grinding wheels with flange - div. internal grinding wheels - Technical documentation

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V Fgslirahev Da Tgstsb weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, spindle hollow 65 mm spindle diameter in front bearing 100 mm clamping chuck diameter 165 mm max. turning diameter 200 mm max. swing diameter 420 mm turning speeds 5.000 U/min control Siemens 840 D sl CNC Turning- and Milling Center | INDEX - G200 equipped with a turret for driven tools as well as y- + B- axis. The INDEX - G200 has been overhauled by RSV-Service GmbH (including control conversion) in 2014. The machine only has 19.000 hours of Power-On. Felirajvzcp Ejhtogb Further information: - Please note that the bar loader is not included in the scope of delivery! The machine videos from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G-200 | G 200

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00348, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 350 kg, Refurbished FANUC M-900iA/350 manufactured in 2013.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Feliowh Ixqsrahtegb   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2013.06 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.06 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm Fgjliewig Ugerahtob NC rotary table: B-axis input and display resolution: 0.001° Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Tool breakage detection

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Fgolsv Sfn Eoirahteb Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Fgelirahswinp Soteb Machines can be inspected under power by appointment.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Fgolisv Da Taerahtob Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty 48V 6PZS 750AH - DIN B REMA 320 A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L 1,030 x W 619 x H 627 mm Weight: approx. 1,050 kg Capacity: min. 90-100% (C5 report included with delivery) Fits: Linde A 10 - 117-00 Linde A 10 Z - 117-00 Jungheinrich EFX Jungheinrich EFX 125 Jungheinrich EFX 13 Jungheinrich EFX 413 Jungheinrich EKX 410 Nichiyu FBT18-80 and more... All common battery sizes available. Fgolewindcsirahtsb

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00366, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 185 kg, Refurbished FANUC R-2000iB/185L manufactured in 2012.03. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Fgelowh Iw Toirahtob Model: R-2000iB/185L Model Number: A05B-1329-B211 Year of Manufacture Robot: 2012.03 Warranty term (months): 12   Payload (kg): 185 Reach (mm): 3060 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.03 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12  

Condition: used, Year of construction: 2009, Functionality: fully functional, CNC Control unit FANUC MSX-701 III Working area Circulation diameter over bed => 800 mm Circulation diameter over cross slide => 800 mm max. turning diameter => 320 mm Standard turning diameter => 200 mm max. distance between tips => 1130 mm max. turning length => 810 mm max. workpiece height => 300 mm Travel x-axis => 210 mm (per Revolver 1 and 2) Travel y-axis => +65 / -45 mm Travel z-axis => 810 mm (per Revolver 1 and 2) Travel b-axis => 920 mm Fgslirajwig Nwohtsb Main Spindle max. spindle speed => 5000 min-1 drive capacity (30 min / permanent) => 25 / 22 kW max. bar diameter => 65 mm Spindle bore => 73 mm spindle diameter in front bearing => 120 mm Two directly driven AC high-performance spindles, spindle orientation without locking Tool revolver Two Revolver with 16 tool stations each, y-axis at the first revolver, Switching time of 0.18 s to the neighbouring station integrated motor with a drive power of 7,5 / 5,5 kW (5 min / permanent) Bar feeder LNS Quick Load Servo 65 Diameter range => 6 - 65 mm Round and hexagonal material bar length => 350 - 1300 mm (max Headstock length) Further equipment Chip conveyor, discharge on the right Coolant system with increased pressure (5 bar), flow rate 20 l/min Automation with displa of the total quantity, workpiece counter with cycle-stop-command, integrated mobile workpiece unloading system with gripper, workpiece collection container for workpiece unloading system

Condition: new, Year of construction: 2025, Standard equipment: robust, high-quality and inclined rotating hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop continuous speed control connection cable with SCHUCO plug (1.2 m) undervoltage release drill protection with electric. Protection Emergency stop push button Technical data: Weight in kg: 30 Motor kW: 0.45 Alternating current 230 V Fgslirasby Stpjhteb Speed 1/min: 250-3000 Drilling capacity mm: 10 - Steel Ø 12 mm - Aluminium Ø 20 mm - Soft wood Ø 40 mm - Drilling depth 50 mm - Projection 180 mm - Column diameter 50 mm - Usable work surface WxL 300 x 200 mm - T-slots, number 2, distance 100 mm Dimensions width 12/20 mm - Spindle B 16 - Digital speed display - Drilling depth display scale - Drilling depth stop: quickly adjustable stop ring - Manual feed - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE FLOTT'S SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 2005, Ref. -No.: 10453 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2005 Folowinp Ejirahtegb Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36,0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 15 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Fgslev Da S Neirahtob - in checked conditions - machine video - ?v=DrOH6oWnvKo Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty 48V 4PZS 620AH - DIN B REMA 320 A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: H 1,035 x W 443 x L 782 mm Weight: approx. 969 kg Capacity: min. 90-100% (C5 report included with delivery) Suitable for the following models (reach trucks) and more: Linde A (1120) - 5022-00 Linde K - 5231-00 Linde K - 5231-00 - side-loading Linde K 10 - 148-00 Linde K 10 - 148-00 - vertical-loading Linde K 12 - 01 - 148-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal change Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal change Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - frontal change Linde R 14 N - 1120-00 - vertical change Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical change Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal change Fjliraewinawehtogb Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115-02 - vertical change Linde R 16 N HD - 1120-00 - frontal change Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - frontal change Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical change Linde V 10 E - 146-00 Linde V 12 E 01 - 146-00 - vertical change Linde V 12 E 02 - 146-00 - vertical change Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Capricorn Boss WR 16 All common battery sizes available

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00426, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 210 kg, FANUC R-2000iB/210F manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 Folirswhyamjahtjgb RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm Fjliraheu Sa U Dstsgb capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00411, arm reach: 3,500 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 100 kg, Refurbished FANUC R-2000iB/100P manufactured in 2008.10. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/100P Model Number: A05B-1329-B231 Year of Manufacture Robot: 2008.10 Warranty term (months): 12   Payload (kg): 100 Reach (mm): 3500 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Rack Mount Weight (kg): 1560   Controller: R-30iA B-Size Folirahewhw Dcstogb Year of Manufacture Cabinet: 2008.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12  

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00349, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 350 kg, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 Feliswhwxmsrahtogb RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00453, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 125 kg, Refurbished FANUC R-2000iB/125L manufactured in 2012.07. The robot comes with an R-30iA B-Size controller including iPendant. Fjlswhvwzeirahtsgb   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2012.07 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.07 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10