Used Nilfisk-Alto Neptune 2-41 for sale (49,335)

Condition: used, Year of construction: 2000, machine/vehicle number: 921115, Ideal machine for the production of rolling pins, turned round chair legs and similar. Cgobsrmxr Aj Ey Ugist

Condition: new, Year of construction: 2024, Construction As a standard, the exhaust filter frame is made of steel - AISI 304 (it is possible to make a special version of steel, e.g. AISI 316) Principle of operation The scrubber is equipped with two filtration towers - a pre-treatment column and a proper treatment column. The first column has one filtration level, the second column additional four levels of exhaust gas filtration. Each filtration level is equipped with spray nozzles, allowing for self-cleaning of the filter cartridges. Oils and impurities condensed from the exhaust Cjb Eysitc Hho Ugiegt gases enter the water tank located at the bottom of the machine. Then, impurities are filtered out of the bath using a lamellar oil separator. Installation Purchaser should ensure access to the machine of media such as: cold/hot water, compressed air and ensure the possibility of replacing the water bath after the cleaning process. The columns are disassembled to facilitate transport and installation.

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 3784031, Electric motor AC DEMAG Type: KBF 80 A 8/2, Serial No: 3784031, 0.13/0.50 kW S4-40 %ED, 630/2710 rpm., Y380 V-50 Hz, 1.2/1.5 A DEMAG AC electric motor Type: KBA 71 A8, Ser.No. 4407067, 0.1 kW 100 %ED, 670 rpm, D/Y 220/380 V - 1.35/0.79 A Csb Eou Dk Acsy Ugijgt

Condition: like new (used), Year of construction: 1990, Plastic waste recycling chipper. Good condition, no vibration, no extraneous sounds. We export in any direction Ceb Ey Ugsui R H Djijgt

Condition: good (used), We can sell the unit as is or fully refurbished. Please check out our other listings as well. Cgjb Ey Ugsn Uwc Ejiot

Condition: used, Year of construction: 2009, Blow moulding machine PET tenz Cob Eysupi Iae Ugiogt

Condition: new, Year of construction: 2024, Our new generation Double Shaft Multi Slitting Machine CML/2/250 has entered the service of our sector... Self-adjusting feed speed according to the cutting height... Ability to install saws of different diameters thanks to the up-and-down movable saw shaft Automatic positioning according to cutting height Adjustable cutting height from 20 mm to 250 mm ----- Csbottlamo Ey Ugijgt Our new generation Double Spindle Multiripsaw Machine CML/2/250 has entered the service of our industry... Self-adjusting feed rate according to cutting height... Ability to mount saws of different diameters thanks to the up-down movable saw spindle Automatic positioning possibility according to cutting height Adjustable cutting height from 20 mm to 250 mm

Condition: new, Manufacturer: Demag Cranes Type: Chain Hoist 380-415V 50Hz Model: DMC-PRO-1-125 1/1 H2.8 V8/2 Csb Ey Uouywdrjgijgt Load Capacity: 250Kg Hook Path [m]: 2.8 m Group Of mechanisms FEM: 4m / M7 Condition: NEW OUT OF BOX

Condition: new, Manufacturer: Demag Cranes Cgeb Ey Ugjuywdlsijt Type: Chain Hoist 380-415V 50Hz Model: DC-ComA 1 125 1/1 H4 V8/2 Load Capacity: 250Kg Hook Path [m]: 4m Group Of mechanisms FEM: 3m / M6 Condition: NEW OUT OF BOX

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke distance: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Cgjb Ejwcn H Roy Ugiot Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Csb Eowc Ucfoy Ugiogt Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Year of construction: 2010, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 13483, No reserve price - guaranteed sale to the highest bidder! Cgob Ey Ugowcntdsijt With new knives, screens, and wear-resistant plating, as well as overhauled electrical components! TECHNICAL DETAILS Motor power: 75 kW Motor speed: 990 rpm Design: heavy-duty Inlet & Rotor Inlet opening: approx. 450 x 580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Number of stator knives: 2 rows Number of rotor knives: 3 x 3 EQUIPMENT - Solid enclosed rotor - Chunk mill, ideal for crushing solid parts - Hardox wear-resistant plating - new - Stator and rotor knives - new - Hydraulic unit - Temperature monitoring on the housing - Screen basket and 1 screen - new - Control cabinet with new cabling, approx. 6 m

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) Cobewcz U Io Ey Ugiogt TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Chip conveyor: available Cooling system: available Maintenance: regular

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Cgob Eyowhdk Ne Ugiet Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: Flex 41/42, Storti Flex 41/42 Year: 2017 Material Capacity: Cgob Ey Uswbuw Hsgiot Min.27.5’’ x 27.5’’ Max 72’’ x 60’’ Voltage: 480V 60HZ Right | Right

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Cjbsv Nw Npj Ey Ugijgt Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: ready for operation (used), Year of construction: 2014, operating hours: 543 h, Functionality: fully functional, machine/vehicle number: 797298, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, One robot will be auctioned (built in 2014; operating time 543 hours; serial number 797298) Kuka robots now available at attractive package prices. Please also check out the other auctions: Cgeb Ey Uowc Uaqegijt Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Four-pack with robots built in 2013 and an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: good (used), Year of construction: 1993,

Condition: used, mileage: 166,000 km, Year of construction: 2006, Serial number: ZCFC35A600563xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19211 Specifications: - Km: Approx. 166,000 - Gear: Manual - 4x2 - Tires (see pictures) - 2 sets of tires on rim - Trailer hitch - Plan length: Approx. 4 meters says the owner - Spare tire - 3 seats - Radio/CD - Climate/AC Cob Eyevg A Rgs Ugiogt - Ready for delivery Description: Iveco truck from 2006. The truck is delivered Eu-approved. Sold with 2 sets of tires. Km: 166000 HK: 136 Technical approved: no EU-approved until: 09.06.2024 Own weight: 2140 Total Weight: 3500 Payload: 1285 Width: 218 Length: 640 Euro: 4 Gearbox: Manual

Condition: good (used), mileage: 631,125 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/55R22,5, fuel: diesel, wheelbase: 3,950 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Other options and accessories = - Digital tachograph - Tachograph (control device) - High roof - Slider = Remarks = Number of axles: 3, Configuration: 6x2, Own weight: 8472 kg, Gross weight: 26000 kg, Total tank capacity: 400 liters, Fifth wheel height: 121 cm, Fifth wheel: Slider, Number of locks: 1, Suspension type: Air suspension, Cabin type: High roof, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heating, Color: White, Engine power: 338 kW (453 Hp), Euro: 6, Gearbox type: AS-Tronic, Gears: 12, Power steering, ABS, ASR = Other information = Gearbox Gearbox: 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire profile left: 4 mm; Tire profile right: 7 mm; Suspension: leaf springs Axle 2: Tire size: 385/55R22.5; Lift axle; Tire profile left: 2 mm; Tire profile right: 1 mm; Suspension: air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Tire profile left inside: 15 mm; Tire profile left outside: 15 mm; Tire profile right inside: 15 mm; Tire profile right outside: 15 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 667 x 255 x 390 cm Weights Empty weight: 8,472 kg Payload: 17,528 kg GVW: 26,000 kg Condition Technical condition: good Cgjb Ey Ugeuxz T Ueijt Visual condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), SDD Square Fold Module SFM 0704 + 2 Side Booklet Trimmer BLT 0202 Perfect condition , low meter ! As an experienced retailer of second hand copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. Ceb Ey Ujfybf Aegijgt We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797273 + 797258, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2013/2013; operating hours 2,154/14,355 h; serial numbers 797273/797258) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Cgeb Ey Ugjwc T Tcoiet Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Year of construction: 2020, Condition: used, Please contact ATS Norway AS for more information Please provide reference number upon request: 19238 Specifications: - 2020 model - 380 hours and 830 hours - Pump is Atex and EX approved - DNV 2.7.1 Containers - Volvo Motors - Light - Ready for delivery Description: We are talking about 2 identical pumps, both of which have conversion kits. Cgjb Ey Usvg Abxjgist Set 1: 2500 bar 40l/min Set 2 1000 bar 100L/min The pump has been running for 380 hours and 830 hours, respectively The pumps are Atex and EX approved according to Zone 2 offshore use The pump is built in DNV 2.7.1 containers We have machine card on one machine It includes various sensors for the machine, which are fully encapsulated in ex enclosures. Ready for delivery.

Condition: good (used), mileage: 578,294 km, power: 338 kW (459.55 HP), first registration: 08/2019, fuel type: diesel, color: red, axle configuration: 6x2, tire size: 315/60R22,5, fuel: diesel, wheelbase: 3,950 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Slider - Parking air conditioning - Additional braking system = Remarks = Number of axles: 3, Configuration: 6x2, Own weight: 8467 kg, Gross weight: 26500 kg, Total tank capacity: 460 liters, Fifth wheel height: 111 cm, Fifth wheel: Slider, Number of locks: 1, Suspension type: Air suspension, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Parking air conditioning, Auxiliary heating, Color: Red, Engine power: 338 kW (453 Hp), Euro: 6, Gearbox type: AS-Tronic, Gears: 12, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR = More information = Gearbox Gearbox: 12 gears, Automatic Axle configuration Tyre size: 315/60R22.5 Brakes: disc brakes Axle 1: steered; tire profile left: 8 mm; tire profile right: 9 mm; suspension: leaf spring Axle 2: lift axle; tire profile left: 13 mm; tire profile right: 2 mm; suspension: air suspension Axle 3: double tires; tire profile left inside: 10 mm; tire profile left outside: 10 mm; tire profile right inside: 10 mm; tire profile right outside: 10 mm; Suspension: air suspension Dimensions Cob Ejuxyamoy Ugiogt Dimensions (L x W x H): 674 x 255 x 354 cm Weights Empty weight: 8,467 kg Payload: 18,033 kg GVW: 26,500 kg Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 2,239 h, Functionality: fully functional, machine/vehicle number: 796105 + 796713, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2006/2010; operating hours 147/2,239 hours; serial numbers 796105/796713) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Cjb Ey Ujwc T Sxogiogt Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included