Used Bolinder Munktell Bm 55 for sale (24,716)

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 662210191, total height: 2,000 mm, overall weight: 1,300 kg, total width: 820 mm, total length: 1,380 mm, The DURMA P 55 hydraulic metal slotting machine was manufactured in 2010 by the renowned DURMAZLAR brand. Technical parameters: - table dimensions: 550x510 mm - reach: 510 mm - hole diameter fi 40 mm in 10 mm thickness - hole diameter fi 20 mm in 20 mm thickness - stroke: 60 mm - cycles per minute: 37 - engine power: 5.5 kW - tank capacity: 76 l Csb Exhjvb Ia Aocvogt - machine dimensions (length x width x height): 1340x1850x930 mm - machine weight: 1300 kg

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, Electric heating stove Brand Leventi Model BM MM Q4 Serial number: 07030172 Year of construction: 2007 Cgeb Eowar Slexhcvst Power 18.5 kW Voltage 380/415 V, 3 Ph, 50/60 Hz 12 levels Level dimensions: (12x) 600 mm x 400 mm Overall dimensions: 980 mm x 900 mm x 1800 mm

Condition: like new (used), Year of construction: 2023, operating hours: 2,350 h, Functionality: fully functional, machine/vehicle number: API900148, overall weight: 1,431 kg, total length: 2,135 mm, total width: 1,221 mm, total height: 1,804 mm, power: 64 kW (87.02 HP), volume flow: 626.4 m³/h, pressure (max.): 7.5 bar, ambient temperature (min.): 4 °C, ambient temperature (max.): 46 °C, noise level: 70 dB, Equipment: type plate available, Technical data: Possible operating pressure: 7.5 bar(g) Volume flow according to ISO 1217/Annex C: 10.44 m³/min Installed drive motor power: 55 kW Total power consumption: 64.0 kW Specific power consumption: 6.13 kW/m³/min Motor efficiency: 95 % Protection/insulation class drive motor: IP55 Connection voltage: 400/3/50 V/ph/Hz Cooling air fan: 2.6 kW Cooling air volume: 9000 m³/h Ambient temperature min./max. : 4-46°C Compressed air outlet temperature, Delta T: 10 °C Noise level (ISO 2151): 70 dB(A) Compressed air connection: 2½" Residual oil content: 3 ppm Dimensions & weight: : Cob Exov S Ucljhcvegt Length: 2135 mm. Width: 1221 mm. Height: 1804 mm. Weight: 1123 kg Series The ALUP LARGO 55-75 series stands for industrial reliable screw compressors with direct drive and fixed speed. The high-efficiency drive guarantees energy-efficient performance. The series is modular and available in air-cooled as well as water-cooled versions, with options for, among other things, a built-in compressed air dryer, heat recovery and integrated overarching control. Fixed speed Compressors with fixed speed are often used when the compressed air consumption is fairly constant or cover a certain base load. The compressors start in star-delta and produce compressed air based on a full-load - no-load operating principle. At full load, the compressor delivers its full capacity. No-load mode anticipates the maximum permitted switching operations per hour. Heat recovery (optional) Around 80% of the heat generated when compressing air can be converted into warm or hot water using the optionally integrated heat recovery system, which can be used for process water, central heating or underfloor heating, for example. This option enables very serious energy savings! Control The smart microprocessor control Airlogic2 T has a 4.3” full-colour touchscreen with graphic display for easy operation and navigation. All essential compressor functions are constantly monitored. Adjustable timers in combination with double pressure bands ensure optimum coordination with the production process. The intelligent no-load control (IUC) reduces no-load hours to a minimum. Automatic restart after a possible power failure can be programmed. Integrated connectivity Always in contact with your compressor thanks to the integrated ICONS communication module. 100% in control thanks to push messages, reports and analysis options.

Condition: new, Year of construction: 2025, fuel type: diesel, power: 44 kW (59.82 HP), motor manufacturer: 1103A-33TG2, General information Field of application: Construction Weights Empty weight: 984 kg Functional Generator capacity: 55 kVA Other information Fuel consumption: 8.7 L/Hour at 75% Load Prime Generator: FG Wilson FGL20070 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 145 l Transport dimensions (LxWxH): 2,298x1,025x1,427 Cgjbjtw Raue Exhcvet Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, mileage: 352,595 km, power: 271 kW (368.46 HP), first registration: 04/2016, fuel type: diesel, number of seats: 55, gearing type: automatic, next inspection (TÜV): 05/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, spindle speed (max.): 3,500 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, table length: 420 mm, table width: 125 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Cgjbev Um A Ae Exhcvjt Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: used, Functionality: fully functional, Year of construction: 2011, operating hours: 6,963 h, lifting height: 5,500 mm, mast type: triplex, construction height: 2,675 mm, fork length: 1,400 mm, drive type: Treibgas, Sideloader Cgsbeu Ac Hws Exhcvot Mast type: Triplex Technical condition: good

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Cebjwakkts Exhcvjgt Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: ready for operation (used), Electrolux BM30 AS, unit ready to work, 30 and 20litres pans with accessories Cgeb Eov T Ndysxhcvot

Condition: used, Functionality: fully functional, Year of construction: 2023, operating hours: 5 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,740 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Elektro, construction width: 1,260 mm, net weight: 4,146 kg, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires size: 28x9-15 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 6.50-10 Rear tires condition: 80 - 100% Battery voltage: 80V Battery Ah: 600Ah Battery manufacturer: Kion Group Battery year of manufacture: 2023 Battery condition: New Side shift, Cgsb Eev Ek Iwexhcvst 3rd valve, 4th valve, rear work light, front work light, heating, load protection grille, full cabin, CE certificate, Safety Light,

Condition: ready for operation (used), Functionality: fully functional, the machine is unused Electric motor A 37-1770-55 The engines are unused. Voltage 575V D 60Hz Power 37 kW Speed ​​1770 rpm Shaft diameter 55 mm Net weight 250 kg Ceb Ejv Txryjxhcvegt In stock 7 pcs

Condition: used, mileage: 332,385 km, power: 271 kW (368.46 HP), first registration: 03/2016, fuel type: diesel, number of seats: 55, gearing type: automatic, next inspection (TÜV): 05/2025, emission class: euro6, color: white, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, bathroom, parking heater, sleeping cabin,

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 1,279 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,650 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, Cgjb Exheu Acykjcvst

Condition: reconditioned (used), Year of construction: 2014, operating hours: 416 h, Functionality: fully functional, working width: 560 mm, area performance: 3,000 m²/h, overall weight: 190 kg, warranty duration: 12 months, COMAC INNOVA 55 B SCRUBBERS NEW 12V 105Ah SIAP GEL BATTERIES (2x) 2014 year of production Machine mileage: 416 hours 560mm cleaning head equipped with a new medium-hardness disc brush, allowing work on any surface New natural rubber (rear rubber) and polyurethane (front rubber) squeezing rubbers The device is equipped with a new durable drain hose and a new suction hose The new suction turbine provides high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 560 Suction width (mm): 800 Theoretical efficiency (m²/h): 3000 Tank capacity clean/dirty water (l): 70/70 Number of brushes (pcs): 1 Brush speed (rpm): 170 Weight without batteries (kg): 110 Total weight, ready to work (kg): 190 Climbing ability (%): 10 Csb Esv Up Unexhcvogt INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (x2) NEW suction turbine NEW drain hose NEW suction hose NEW 560mm PPL 0.6 disc brush Suction bar with new rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: 70-litre tank allows you to pour a large amount of solution cleaning agent, so you don't have to stop work often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic suction beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (560mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: ready for operation (used), Jenaer Antriebstechnik 23S31-0650-805L7-55 (200) 2-phase 50 Pole-Pair Hybrid Servo Motor, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cgjb Exhei D Ixkecvot

Condition: ready for operation (used), fuel type: diesel, Year of construction: 1977, operating hours: 10,500 h, Equipment: all wheel drive, Hanomag 44 or 55C with scale, built in 1977 with approx. 10,500 operating hours, the loader is ready for use and runs well, transport and delivery possible. Viewings also possible on weekends by arrangement. Csb Eevvvmmsxhcvsgt

Condition: excellent (used), Year of construction: 1999, width 55 cm age 1999 rotary feeder 1. station: 4 folding pockets 2. station: 4 folding pockets cross fold KB noise absorbing hoods following knife shaft window folding pocket stream delivery SAK Ceb Exjlyqckehcvsgt power supply 230 volts Delivery time: immediately from stock

Condition: used, mileage: 292,000 km, power: 235 kW (319.51 HP), fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 6,600 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, loading space width: 2,480 mm, loading space length: 8,900 mm, loading space height: 2,650 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, tail-lift, traction control, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: parabolic suspension Empty weight: 8.695 kg Carrying capacity: 10.305 kg GVW: 19.000 kg Cob Exov Rmukehcvegt Tail lift: Palfinger, tail lift, 1500 kg Registration number: 51-BXH-5

Condition: used, Year of construction: 2000, Used Machine MAKA CNC Door Machining Center HC 55 TBZ Year of Manufacture: 2000 Door machining center for machining interior doors (fittings, light cutouts, spy hole milling, etc.) Cgob Exhsv S Dn Docvst BWO 900C CNC control, with 1 MB memory, integrated PC. Working areas: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X- / Y-axis 45 m/min. Z-axis 10 m/min. 1 universal milling unit SK40 with integrated A-swivel axis 190° (+/- 95°), in the X-axis direction for lock/hinge machining on both sides along the long edge of the door directly with the unit. Water-cooled milling spindle, rated power 8 kW, available from 7,000 rpm. Speed continuously adjustable from 1,000 to 17,100 rpm. SK40 tool holder for automatic tool changing. 1 x chain tool magazine with 24 positions, for tools up to 90 mm in diameter, with sorted storage up to a maximum of 160 mm in diameter, arranged at the unit's starting position. Total tool length max. 200 mm from the spindle mount. Milling spindle and 2 x magazine positions configured for angle/probe heads with torque support. Machine table with program-controlled width adjustment and width measurement for machining with edge finishers to ensure consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically raised and lowered. 1 x longitudinal stop with pneumatic insertion stroke, mounted on the unit, for positioning according to the door length and thickness. 4 x pneumatic stops, pivoting sideways, for doors with veneer/cover panel overhangs of up to 15 mm, as well as with selectable height adjustment for changing stop heights for prefabricated doors (single- or double-rebated doors). 2 x vacuum clamping lines, each line with 5 x vacuum plates, 130/200 x 70 mm, with touch valve and blow-off device. 3 vacuum plates per line can be lowered according to the door height being processed. 1 x vacuum pump with approx. 128 m³/h suction capacity, with 250-liter intermediate tank, for rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Work safety: bumpers on both sides of the mobile portal, safety fence on the side. Various tools and tool holders can be included upon request. The machine is assembled and ready for operation and can be inspected in the Hanover region.

Condition: good (used), Year of construction: 2005, Makino A 55 E Cgsb Esvm Edvjxhcvet

Condition: ready for operation (used), Jenaer Antriebstechnik 23S31-0650-807W7-LF-55 (30) 2-phase 50 Pole-Pair Hybrid Servo Motor, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cebei D Ixnj Exhcvogt

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Cob Exhcsl Dpc Esvsgt Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: new, Year of construction: 2023, lifting height: 5,000 mm, fuel type: diesel, power: 55 kW (74.78 HP), color: other, Field of application: Internal logistics Cjb Eolypdmsxhcvsgt Empty weight: 7.750 kg Lifting capacity: 5.500 kg Rental currency: EUR Please contact Jan De Lepeleer for more information

Condition: new, Year of construction: 2024, fuel type: diesel, power: 50 kW (67.98 HP), motor manufacturer: Cummins 4BTA3.9-G2, General information Field of application: Construction Serial number: 20221024029 Weights Empty weight: 1.176 kg Functional Generator capacity: 55 kVA Other information Fuel consumption: 10 Liter/Hour at 75% Load Cgsb Exhcstqlf Ievst Generator: Leroy Somer TAL-A42 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 87 l Transport dimensions (LxWxH): 2,5x1x1,25 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm Cob Exhsva Hi Hocvogt External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.