Used Barford Sx 5000 for sale (4,220)

Condition: excellent (used), Year of construction: 1995, Inlet Ø: max. 13.3 mm – min. 5.5 mm Finished Ø: max. 12.0 mm – min. 5.0 mm Motor power block: 200 kW Block drawing discs Ø (e.g.: 525mm for a pull and 700mm for finished?) no Winder capacity - 5 t Cslor Nfvmsq Igntegt The line consists of : - Drain mandrels - Horizontal sling catcher KWA 12 - Inlet trestle - Feed Driver - Drawing flour application device - Roll stand - KOCH type: KEG 5000 Drawing block - WiTechs Type: DEG 2.5 reassurance - KOCH type: KSS 1250 Bobbin winder - ABUS Type: VS used Column slewing crane - Protective fence - El. Cabinet - Comand pults

Condition: used, mileage: 953,000 km, power: 340 kW (462.27 HP), fuel type: diesel, tire size: 385/65 R 22.5, fuel: diesel, wheelbase: 6,450 mm, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, trailer coupling, = More options and accessories = - AdBlue system - Aluminium fuel tank - Digital tachograph - Electric windows - Lifting axle - Air suspension - Radio/CD player - Sleeping cabin - Sunshade - Parking air conditioning - Power take-off (PTO) - Central locking - Tow bar = More information = General information Cab: SPACECAB Cjlq Ignewdl Dcstjgt Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Drivetrain AdBlue system: Yes Axle configuration Front axle: Tire size: 385/65 R 22.5; Steered; Tire profile left: 20%; Tire profile right: 20%; Suspension: Leaf spring Rear axle 1: Tire size: 295/60 R 22.5; Twin tires; Tire profile left inside: 20%; Tire profile left outside: 20%; Tire profile right inside: 20%; Tire profile right outside: 20%; Reduction: simply reduced; Suspension: air suspension Rear axle 2: Tire size: 315/60 R 22.5; Steered; Tire profile left: 20%; Tire profile right: 20%; Suspension: air suspension Dimensions Dimensions (L x W): 1098 x 255 cm Weights Empty weight: 19,091 kg Payload: 8,909 kg GVW: 28,000 kg Functional Crane: PALFINGER PK 50002, behind the cabin Height of the loading area: 100 cm Condition Damage: none

Condition: like new (used), Functionality: fully functional, Year of construction: 2018, operating hours: 766 h, load capacity: 5,000 kg, lifting height: 5,300 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,650 mm, motor manufacturer: KUBOTA LPG, gearing type: automatic, fork length: 1,200 mm, tire condition: 90 %, front tire size: 300x15, rear tire size: 7,00-12, overall weight: 7,740 kg, empty load weight: 5,000 kg, total height: 2,650 mm, total length: 3,250 mm, total width: 1,400 mm, maximum load weight: 5,000 kg, fuel: liquid petroleum gas (LPG), Equipment: cabin, lighting, pallet forks, sideshift, Hyster is like new. Original only 766 hours. We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English between 9.00 and 21.00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== Cgjlqswf Hwmo Igntst We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts . We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: used, mileage: 107,831 km, power: 160 kW (217.54 HP), first registration: 11/2011, overall weight: 11,990 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, gearing type: automatic, emission class: euro4, total width: 2,450 mm, total height: 3,700 mm, Equipment: air conditioning, crane, parking heater, Subject to errors and prior sale! Internal number: 1433.V225500----U 5000 Flatbed Palfinger Crane Auxiliary Heater Cgelq Ijv N Afisgntot RFK 6-Seater ----The vehicle is unprocessed! Nationwide delivery is available for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also available without a down payment! Do you have any questions? We'd be happy to advise you!

Condition: like new (used), Year of construction: 2020, Arburg ALLROUNDER 920H 5000-4600 (2020) Clamping force: 500 t Machine type: Hybrid Year: 2020 Celq Isuzmpgjgntegt Screw diameter: 80 mm Shot weight: 1653 g Injection volume: 1810 cm3 Drive: Hybrid Arburg ALLROUNDER 920H Distance between tie bars : 920x 920 mm Clampping force : 5000 kN Opening force : 900 mm Mould mounting platens : 1280 x 1280 Weight of movable mould half : 6000 kg Screw diameter : 80 mm Injection unit Screw stroke : 360 mm Injection pressure max : 2500 bar AED - electro-mechanical dosing drive, precise and energy-saving dosing as well as gentle material preparation, with short cycle times Clamping unit - Servo-electric toggle-type clamping unit with short dry cycle times Position-regulated auger with control valve on the injection unit, including reverse regulation pressure, pressure force of the nozzle manually adjustable. 4 Electric and pneumatic control of needle-type 1x Hydrulic ejector 2x Air blow Accumulators Machine weight : 31 700 h Lenght : 9490 mm Height : 2838 mm Width : 1100 mm only 492 hours! new machine

Condition: used, Year of construction: 2014, Kannegiesser belt conveyor GF 5000-680-600 RA2298 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 5000 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Conveyor speed: freely adjustable between -1.3 and 1,3 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Cslq Ietvb Imsgntogt Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), Year of construction: 2016, Straw pellet production line for sale ! Year - 2016 Capacity - 600 kg/h Used only 2000 working hour Line Consists : Mixer Mill Pellet press Vertical transporter 2 pieces Roto Silos for raw material 2 pieces Straw work desk Command counter A fan large Libra Vibro Sito Fan small A straw crusher Colq Igopa Uhujntsgt Cyclone for dust Refrigerator Pellet silo

Condition: as good as new (ex-display), Year of construction: 2025, KAESER compressed air tank 5000 liters standing, galvanized 11 bar include fittings Year of construction: 2025 Cgeljkzkfrjq Igntjt High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 5000 liters Overpressure max: 11 bar -Diameter: 1400 mm Container height: 3570 mm Mass: 1050 kg Connection compressed air inlet: 2x DN 100 Connection compressed air outlet: 2x DN 100 Connection safety valve: G 2 " Connection condensate drain: G 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2010, Condition: excellent (used), 4-AXIS MACHINING CENTER 2 PALLETS Colepy D T Heq Igntogt Crs 730 x 730 x 740 mm, 2 pallets 500 x 500 mm, spindle speed 18,000 rpm, pallet indexing in all degrees, Renishaw preparation, BT 40 40 tool magazine, 70 bar center coolant, chip conveyor. CN MATRIX

Condition: good (used), Year of construction: 2004, operating hours: 73,056 h, Functionality: limited functionality, machine/vehicle number: A0060A0266, Machine operating hours: 73,056 h Max. punching force: 220 kN Punching working area: 2,535 x 1,280 mm Max. sheet thickness: 8.0 mm Total connected load: 29 kVA Last commissioned: March 2024 Standard equipment Machine • Sturdy C-frame • Coordinate guide with integrated linear magazine • 21 tool stations • 3 clamps • Automatic part chute 500 x 500 mm Punching head • Hydraulic single-tool holder, 360° rotation • Adjustable hold-down force • Programmable hold-down device • Spray lubrication for punches • Punch slug extraction Safety Celq Ignowduukstsgt • CE mark • Multi-beam light barriers • Rapid hydraulic shutdown • Bowing detection Extended equipment • Brush table with loading and unloading aid • Height-adjustable, individually opening clamps • Reloading cylinder • Vibration-damped installation • Chip conveyor Available additional options • Trumalift Sheetmaster • Trumagrip 2500x1250 mm • Trumatool 40 • Trumasort R4 • Trumasort L The machine is available immediately. Due to the last commissioning more than a year ago, malfunctions may occur during commissioning. The sale is ex works: dismantling, removal, loading, and transport are at the buyer's expense.

Condition: ready for operation (used), total length: 5,000 mm, T-slot Table 5000 x 2300 mm Large: 2300 mm Cgelq Igsv Takqsntjt

Condition: used, Year of construction: 2014, Kannegiesser belt conveyor GF 5000-880-800 RA2301 Make: Kannegiesser year of construction 2018 Conveyor length (FL): 5000 mm Belt width (GB): 800 mm Cgjlq Ignjtvhv Dotet Nominal/outer width (NB): 880 mm Conveyor speed: 0,47 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Grequency converter Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Colq Ignswak U Eetogt Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: excellent (used), Functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,100 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. Cgslqjwfxrve Igntjt We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: used, Year of construction: 2008, Overview This cooking kettle, type: Steiner SX-100 was built in 2008 in Germany. Functions: cooking meals, soups or stew. When ready just tilting. Technical Details 0,25 kW 400 V 140 liter Scope of delivery Cooking kettle | Steiner | SX-100 | 2008 Cjlq Ijv Tvz Segntogt

Condition: ready for operation (used), Lenze / Schneider Electric SX-1/21/0/2/8 m LED L1 card 51130049 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Cslqspf Aq To Igntsgt

Condition: ready for operation (used), Type: 1304 -The ZINSER cutting machine 1306 has been particularly developed for efficient machining of pipes for cylindrical pipes. Apertures, notches and the entire end preparation can be realized quickly and economically. A variety of standard figures is available from the ZINSER MCC software. Colq Ijv Tap Tjgntjgt - Pipe cutting machine with track (X) and rotation axis (A) - Three-jaw chuck or four-jaw chuck - A hollow shaft through the chuck enables the use of an internal ventilation - CNC-controller - Thermal dynamics plasma power source with dialogue system - Torrit filter system - max cutting cap: 25 mm - X-movement: 5100 mm - Z-movement: 150 + 270 mm Plasmasource: Thermal Dynamics A60

Condition: good (used), Functionality: fully functional, Morgana DigiFold 5000P is automatic creasing and folding machine in one pass. Excellent machine for folding digital printed stock without cracking the paper Specifications Manufacturer Morgana Systems, UK Model DigiFold 5000P Max paper size 900mm x 385mm Min sheet size 210mm x 140mm Max paper weight 400gsm Cgelowfnx Esq Igntet Min paper weight 120gsm Max number of creases per sheet 9 Max number of folds per sheet 2 Min repeat crease distance 40mm Min fold distance 70mm Max working speed 5000 A4 sheets per hour Min crease and fold distance from lead edge 50mm Power connection 220/240v single phase Machine weight 190kgs

Condition: ready for operation (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: MSV05000, total length: 1,450 mm, total height: 1,800 mm, total width: 1,110 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 220 V, input current: 10 A, input frequency: 50 Hz, Condition: Used, in perfect condition. Operational details: • Production date: 04/2022 • Purchase: 11/2022 • Installation: 01/2023 Technical specifications: • Build volume: 1450 x 1110 x 1800 mm • Machine weight: 2500 kg • Power supply voltage: 220/380 – 240/415 V • Socket: 3W + N + PE; 10A,50/60 Hz • Air pressure: 6–8 bar, 250 l/min • Serial number: 170 • Product code: MSV-05000 Description: The Massivit 5000 is an industrial 3D printer designed for the production of large, complex models. Based on GDP (Gel Dispensing Printing) technology, it offers high performance thanks to: • Dedicated control unit • Double print heads with independent X, Y, Z axes • Large printing platform Cgslswdxqisq Igntjt • Dual material system • Integrated UV curing engines with automatic image recognition • 44” broadcast monitor capable of recording the entire printing session We have €20,000 of consumables for the Massivit 5000 in stock. Type of material available: • Dimengel 110 (3) • Dimengel 400 (6) • Dimengel 90 (7) • Dimengel 20 (1) Ideal for applications in the advertising, industrial design, scenography, automotive sectors and much more.

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3100 mm Y-Axis Movement 1600 mm This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. Application Types Punching Cgslq Iswbauwjgntot

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 965x2085x2130 mm Weight 300 kg Celqevz Erpo Igntjgt Total power requirement 5,5 kw

Condition: ready for operation (used), controller model: Heidenhain Manual Plus, total length: 8,400 mm, total width: 3,550 mm, total height: 2,100 mm, net weight: 10,000 kg, swing diameter over cross slide: 5,000 mm, additional equipment features: yes, Heidenhain-besturing Spaantransportband Beschermhoezen Extra stabiel Swing over bed: 1250 mm Swing over cross-slide: 930 mm Dia of spindle bore: 128 mm Power on the spindle: 41 kW Cgolqsv St Ere Igntst Number of speeds: 4 > 630 rpm Total power needed: 67 kVa Chuck: dia 1000 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Control Unit Model WIN NT Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm General Data Machine weight 17500 kg Control Unit Model WIN NT Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Colowbauqjq Igntsgt Application Types Punching

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2070x930x2280 mm Cgoljvz Erieq Igntet Weight 400 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1685x765x650 mm Weight 91 kg Cjljvz Ek Esq Igntjgt Total power requirement 2,2 kw