Used International 856 Xla Turbo for sale (10,575)

Condition: new, Year of construction: 2022, Functionality: fully functional, cooling capacity: 320 kW (435.08 HP), type of input current: three-phase, overall weight: 3,843 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): -25 °C, input voltage: 400 V, volume flow: 55 m³/h, frequency: 50 Hz, total width: 2,210 mm, total length: 4,600 mm, total height: 2,500 mm, noise level: 65 dB, protection type (IP code): IP54, HITEMA INTERNATIONAL CHILLER TFVF.350 FREE COOLING CAPACITY 320KW ATTENTION: > R-1234ze refrigerant type > This refrigerant is classified in group 2 'non-hazardous' according to the criteria of the Pressure Equipment Directive (PED) 97/23 / EC and 2014/68 / EC. According to IS0-817, the R-1234ze is classified in the A2L security group > Local codes the construction and safety standards must be respected > In the absence of local codes and standards, consult the guide to EN-378 (2017) (safety requirements for substances classified as A2L) or IS0- Bwjlq Ajv Rmdro Dkbol 5149 (2014) (for substances classified as A2L) > It is the responsibility of the installer to obtain approval from the local construction authorities

Year of construction: 2007, operating hours: 100 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: EN 133445-3, A complete line for the production of margarine, confectionery fats, shortening, etc. is sold, with an additional line for milk powder and an automatic CIP rinsing system. It combines equipment from the following manufacturers: CHEMTECH, ALFA LAVAL, TMCI Padovan, O/K Internatsonal, FAVEO, Bortolinkemo, Atlanta, Cidiesse. The plant is located in Chornomorsk. Both lines were installed in 2012, produced one batch and shut down. The equipment needs to be dismantled. More info by phone and presentation on request. Terms of sale: contract, cash on delivery, dismantling and shipment by agreement. Bjlq A Dou Dmlmjkbowl Description of margarine production lines Composition of line A. - four 5 m3 tanks for emulsion preparation with stirrers and pumps. The tanks are mounted on strain gauges; - four 50-liter tanks for flavoring and coloring with peristaltic pumps; - main heat exchanger-pasteurizer of 3 sections of plate type; - main piston pump; - block of creamers (C1+C2); - block of creamers (C3+C4); - working module with 2 pin rotors; - working module with 2 pin rotors. A separate option (with the possibility of connecting) in the line is an aging pipe and a molding kempak machine for the production of margarine for puff pastry. Line capacity: 5 tons/hour for industrial margarines, 1 ton/hour for puff pastry margarine. Composition of line B. - two 5 m3 tanks for preparation of emulsion with stirrers and pumps. The tanks are mounted on strain gauges; - one 50-liter tank for flavoring and coloring with a peristaltic pump; - plate-type heat exchanger-fuse; - main piston pump; - block of kemetators (C1+C2); - block of kemetators (C3+C4); - working unit with 2 pin rotors; - working unit with 2 pin rotors. The line capacity for industrial margarines and shortening is 5 tons per hour. Two parallel lines for containerization and filling of margarines consist of:  unit for forming cartons;  unit for lining cartons with plastic film;  station for filling margarines into cartons;  unit for sealing cartons;  printer for printing on cartons. Three tanks for SIR washing are installed to wash the production lines and equipment. The tanks are designed to prepare cleaning solutions and clean water for washing. The washing station is equipped with a pump. All processes of product production, container formation, filling and packaging, and transportation of boxes are automated to the maximum extent possible. The level of automation is PLC plus SKADA. To produce new fatty products, Chemtech International Ltd. supplied a pilot margarine plant with a capacity of 120 kg/h. Function: Production and packaging of margarine, confectionery, culinary and bakery fats, as well as for the dairy industry with a capacity of 12.4 tons per hour or production and packaging of margarine for puff pastry with a capacity of 4.5 tons per hour. Function: Manufacturing and packing of confectionery and bakery fats, and dairy industry with a capacity of 18.6 tons per hour or manufacturing and packing of fats for dairy products, cocoa oil substitutes with a capacity of 12.4 tons per hour. Located in Chornomorsk. Both lines were installed in 2012, made one batch on it and stopped. The equipment needs dismantling. More information by phone and a presentation on request.

Year of construction: 2022, Condition: new, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 250 / total width 305 mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Other specifications: - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting plates - PU belt - spring-assisted height adjustment - inclination of 35 - belt speed constant 3m/min. (standard) but can be changed up to 16m/min. - quality anodized aluminum profile Bwjlq A Deikvwfokbel - worm gear motor 3 x 400 V, 50 Hz - motor protection switch with 5 m cable & CEE - plug Possible on request: - Special size - cycle control - Frequency converter

Condition: good (used), Turbo systems stainless depositor Model: D900 Stainless depositor, 25Kg hopper, variable speed, hand operated trigger for discharging product Bwslqoffh Ads A Dkbel

Condition: excellent (used), Printing International Cristal 90X2 Bwolqjv Iyh Se A Dkbel

Condition: good (used), Year of construction: 2009, Produce natural pasta filata continuously without bath cook water using the direct steam injection cooker.The GPiCS allows for ingredient addition, delivers fast and full CIP (Clean-In-Place), is a hygienic fully enclosed design and has minimal “shut down” losses. The patented GPiCS uses only direct steaminjection to heat curd to produce natural mozzarella and pasta filata varieties continuously. It is specifically designed for the sensitive nature of mozzarella and pasta filata curd. Benefits: Ability to add ingredients inline. Opportunity for increased yield. State of the art continuous direct steaminjection yechnology. No bath cook wáter. Automated Flexible control. Fully Enclosed process. Minimal shut down losses, fast & complete CIP. Bjlq A Dsv Ak H Iokbswl

Condition: used, Manufacturer: Turbo tools ltd Bwslq Ajvlywne Dkbsl Model: NMD888 Type: Piston dosing machine Mode: Automatic / semi automatic (stroke by stroke) Operation: Pneumatic Action by pedal Adjustable dosing pump Feeding hopper Stainless steel 2 sets of filling heads available

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Bwslsvvlkheq A Dkbel Electrical Specifications: 400 V

Year of construction: 2023, Condition: new, - Delivery: 500 mm - Climbing belt: 1.800 mm - Feeding: 600 mm - cleat height: 30 mm - cleat spacing: 500 mm - Belt speed constant: 6m/min. Belq A Dek Nlfxskbjwl Addition: - corrugated edge (cost: 375 €) - closed cleats (standard: from a useful width of 350 mm the cleats are split in the middle!)

Year of construction: 2010, Condition: used, Turbo M100P single shot depositor stainless depositor, 25L hopper, adjustable weight control, variable speed Bwelq A Dodbqx Sjkbjl

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Bwjlq A Dohg Rcxekbjl Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: good (used), Used Thetford International T3 waste compactor. Bwslq Ajhvi Ahs Dkbjl

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, Functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment Bwolq Asv E Nwde Dkbjl • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Year of construction: 2022, Condition: new, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 350 mm / total width 405 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Bslq A Dkjf U Eu Hobewl Possible on request: - Special size - cycle control - Frequency converter

Condition: like new (used), OK International SS2 band sealer Serial: 2165 Continuous band sealer, stainless unit on painted frame, adjustable speed and temperature control, mobile, 3Ph Belq A Dokl Hrbokbjwl

Condition: new, Year of construction: 2022, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 450 mm / total width 505 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Bwelq A Dksg Arxvobel Possible on request: - Special size - cycle control - frequency converter (485 €) - Corrugated edge (492 €)

Year of construction: 2003, Condition: like new (used), machine/vehicle number: D150P511007, 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame, Bwjlq Asdwhfgo Dkbol

Condition: new, Year of construction: 2022, *STOCK CLEARANCE * DISCOUNT PROMOTION Bwoljhy Edvsq A Dkbsl The conveyor belt is from 2022, new and unused. We offer 1 year warranty. New price from year of manufacture 2023: 1.870 € L. 2000 mm W: 150 mm Mobile Belt speed : 3m/min , but can also be changed Height adjustable : 840 mm - 1240 mm Addition: available with or without baffles/side panels (height : 60 mm)

Year of construction: 2009, Condition: excellent (used), stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC Bwsljdwhf Njq A Dkbsl

Year of construction: 2022, Condition: new, Delivery 500 mm Riser belt 1800 mm Feed 600 mm (incl. hopper) Usable width 250 mm Total width 305 mm cleat height 30 mm angle adjustable Bwslqoh T T Tds A Dkbjl mobile

Year of construction: 2022, Condition: good (used), Turbo D250P Depositor Bweloulic Asq A Dkbel 2022, stainless depositor, 150L stainless hopper, with food pedal, on mobile frame

Condition: new, Year of construction: 2024, Functionality: fully functional, The conveyor belt is from 2024, new and unused. We offer a 1 year warranty. L: 2000 mm NB: 450 mm Bwolq A Dehmufkokbol GB : 505 mm Belt speed : 3m/min, but can be selected Height adjustable: 800-1400 mm

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Belsr Uftroq A Dkbewl Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph

Year of construction: 2022, Condition: new, Task: 600 mm Climbing belt: 1.800 mm Bwolqsiq U S Tj A Dkbel delivery: 500 mm useful width: 450 mm Total width: 505 mm Height: 1.000-1.300 mm

Year of construction: 2011, Condition: good (used), Turbo D253P depositor Bwsler E Dlleq A Dkbjl 2011, Stainless, height adjustable frame, three pistons, with 12 mini shot depositing head with rotary cut off valve, height adjustable frame, mobile