Used International 856 Xla Turbo for sale (10,555)

Condition: used, mileage: 200,000 km, Year of construction: 2021, Serial number: ZCFA875F40271xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18743 Specifications: - 2021 model - Km: approx. 200,000 - 4x2 - 2021 Hiab Zepro lift - Tires (see pictures) - Suspension: Steel front, air rear - Retarder - Side door on box - Norwegian cabinet - Internal width: Approx. 2,470 m - Internal length: approx. 6 m - Internal height: approx. 2,353 m - External height: approx. 3,459 m - Wheelbase: 418.5 cm - Automatic - Tool cabinet - 3 seats - Climate/ac - Radio - Service history is available - Ready for delivery Dusb Hl R Ujvgzw Sj Rjt Description: 2021 Iveco box truck with zepro lift. The truck has been kept in good condition and has been serviced at a specialist workshop. The box is very good (see pictures). Ready for delivery. Km: 200000 HK: 207 Technical approved: Yes EU-approved until: 27.09.2025 Own weight: 4990 Total Weight: 7500 Payload: 2435 Width: 255 Length: 810 Inside width: 2470 Inside lenght: 5997 Inside hight: 2353 Outer total height: 3459 Kw: 152 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr230983, CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, Duob Hl Rowiifbj U Rot FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2024, operating hours: 73 h, load capacity: 10,000 kg, lifting height: 4,535 mm, free lift: 1,530 mm, load center: 120 mm, mast type: triplex, power: 168 kW (228.42 HP), fork carriage width: 2,550 mm, ground clearance: 235 mm, front tire type: Hauler LT, front tire size: 12.00-20, rear tire type: Hauler LT, rear tire size: 12.00-20, total length: 7,400 mm, wheelbase: 2,980 mm, engine type: Cummins B6.7, drive type: Diesel, construction width: 2,560 mm, net weight: 21,820 kg, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 Deb Hleviyc Ss R U Rjut · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Dsb Hl Rewhdhzs U Rout Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Djb Hl R Uev D R A Se Rjut Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill Dsb Hl Rewhf Ngj U Rjut table-size 1.100 x 560 mm max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2022, Serial number: WKVDAF3030011xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19622 Specifications: Duob Hl Revyfhnj U Ret - 2022 model - Air suspension - Tires (see pictures) - Lift on row 1. - Turn on 3. - Liftable roof - Internal length: approx. 1,367 cm - Internal height: approx. 278 cm - Wheelbase: 131/181 cm - Weight: 7,880 kg - Tool cabinet Description: 2022 Kaessbohrer Curtainsider with liftable roof. It is lift on 1st and turn on 3rd. It is ready to be put into operation. Can be delivered within a short time. Technical approved: Yes EU-approved until: 20.04.2026 Own weight: 7880 Total Weight: 45000 Payload: 37120 Width: 255 Length: 1385

Condition: new, Year of construction: 2024, fuel type: electric, lifting capacity: 2,000 kg, net weight: 109 kg, This new electric pallet truck from mer WELDON has a capacity of 2,000 kg;Forks 1150 mm;Super compact, weighs only 109 kg;Equipped with a 48v 10Ah Lithium battery and INTERNAL charger;Pick up yourself or delivery for an additional charge;Order in our webshop or visit us for a test drive. Dusb Hl R Uev E H Hij Rjt

Condition: used, Year of construction: 2023, operating hours: 95 h, load capacity: 12,000 kg, lifting height: 5,550 mm, free lift: 1,900 mm, load center: 600 mm, mast type: triplex, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, ground clearance: 210 mm, front tire type: Hauler LT, front tire size: 12.00-20, rear tire type: Hauler LT, rear tire size: 12.00-20, total length: 7,200 mm, wheelbase: 3,000 mm, engine type: Cummins B6,7, drive type: Diesel, construction width: 2,560 mm, net weight: 21,540 kg, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler Dob Hl R Uovix Ias Rjut · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: new, Functionality: fully functional, Year of construction: 2024, operating hours: 22 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, total length: 2,715 mm, engine type: Nissan, drive type: Treibgas, construction width: 1,225 mm, net weight: 4,490 kg, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Djb Hl Rewhr Rko U Rsut Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand SIEMENS Model Sinumerik Main Drive Number of axis 3 Tools Max weight 5kg Max tool diameter 65 mm Max tool length 220 mm Media Chip conveyor Yes Additional Equipment Coolant Preparation (Filter Fleece) Internal and External Cooling Pendulum Machining Control Unit Brand SIEMENS Model Sinumerik Main Drive Number of axis 3 Tools Max weight 5kg Max tool diameter 65 mm Max tool length 220 mm Media Chip conveyor Yes Additional Equipment Dsb Hl Rewh A Sfo U Reut Coolant Preparation (Filter Fleece) Internal and External Cooling Pendulum Machining This 3-axis CHIRON FZ 15 L vertical machining center was manufactured in 2002. It offers robust construction and precision engineering, ideal for a variety of machining tasks. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 L machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, mileage: 518,814 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, number of seats: 63, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, sleeping cabin, +++new GPS tachograph+++ +++Original KM+++ Emission class: Euro 6 Gearbox: Automatic Seats: 61+1+1 sleeping seats with lap belts _____ Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * LED light * Brake assistant Dusb Hsvzdw Rol R U Rot * Lane departure warning * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Kitchen * Refrigerator * Coffee machine * Central toilet * Leather headrests * Driver microphone Exterior * Trailer hitch * Raising/lowering system * Power steering * Tachograph with card * Sun visor * Sleeping cabin * Electric exterior mirrors * Central locking * Roof hatches, fans, roof vents Audio, communication & electronics * Navigation system * Radio * USB on the radio * Video Other * Vehicle dimensions: Length: 13.90 m, width: 2.55 m, height: 3.84 m * Twin tires * Hubcaps * Tires: VA 30% MA 80% HA 30% Our internal vehicle number: 11293 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: used, mileage: 248,000 km, Year of construction: 2016, Serial number: YV2V001A4GZ10xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18307 Specifications: - 2016 model - Km: approx. 248,000 - Transmission: automatic - Fresh air - Tires (see pictures) - Full page opening - 2500 kg Zepro lift - 20 pallets cabinets - Internal length: approx. 806 cm Dusbsvgziue Hl R U Rst - Internal height: approx. 260 cm - Internal width: approx. 251 cm - Euro 6 - Length: 1,181 cm - Width: 260 cm - Wheelbase: 610 cm - Net weight: 10,300 kg - 4x2 - 326 hp - Bed - Radio/cd Description: 2016 volvo FE 320 with 20 pallet cabinets. It has full side opening and a 2500 kg Zepro lift. Can be delivered within a short time. Km: 248000 HK: 326 Technical approved: Yes EU-approved until: 23.09.2025 Own weight: 10300 Total Weight: 19500 Payload: 9125 Width: 260 Length: 1181 Euro: 6 Gearbox: Automatic

Condition: good (used), operating hours: 1,109 h, fuel type: electric, mileage: 1,109 km, lifting capacity: 1,300 kg, net weight: 200 kg, Electric pallet truck from the Jungheinrich brand is in good condition1,109 hours on the counter;Very compact and weighs only 200 kg;Forks 1150 mm Euro pallet size;Capacity is 1,300 kg;Equipped with a LION battery with INTERNAL charger;Order the pallet truck in our webshop or make an appointment for a test drive. Deb Hl Rev Imh Ss U Rsut

Condition: good (used), Year of construction: 2000, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +- 45 ° strokes - infinitely variable 130 - 1300 Hub/min Minimum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 450 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 30 UpM Max. Workpiece speed 55 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 95 A 160 L coolant capacity 550 l workpiece weight 1000 kg control Siemens Simunerik 840 C weight of the machine ca. 10,5 t dimensions of the machine ca. 3,22 x 3,05 x 2,85 m Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth Dueb Hjvu E Nzel R U Rot - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: not inspected (used), Year of construction: 2019, Functionality: unexamined, Framax bottling line comprising: Framax de-palletiser model Depal-Microlay-300 Framax model Modulblock RFCI-12/12/1-C+RP Rinser Filler Crowner, glass bottles, advised capacity 2,500bph on 275ml bottles Framax LLA-R-SQ-Turbo labeller Framax CIP system model CIP 0500X2 Framax skid mounted de-aerator system (100lt) Deb Hlowid Uke R U Rsut Siat DX PS50 case taper Line conveyors

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining Dob Hl Rjwh Safj U Reut • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: used, mileage: 388,000 km, Year of construction: 2008, Serial number: VF629AHA00000xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18445 Specifications: - 2008 model - Km: approx. 388,000 (want anything) - Suspension: Air - Gear: manual - Tires (see pictures) - Full side opening - 2000 kg Zepro lift - Inside length: approx. 762 cm - Internal height: approx. 261 cm - Internal width: approx. 245 cm - Net weight: 9,650 kg - 4x2 - 320 hp - Reversing camera - Extra lights - Tool box - Bed - Radio/cd Dueb Hlevgxwcj R U Rst - Climate/ac - Services taken by owner Description: Renault premium cabinet truck from 2008. It has full side opening and a 2 tonne lift. Gearbox and clutch were changed around 200,000km. Can be delivered within a short time. Km: 388000 HK: 319 Technical approved: Yes EU-approved until: 30.03.2026 Own weight: 9650 Total Weight: 19000 Payload: 9275 Width: 255 Length: 1005 Euro: 4 Gearbox: Manual

Condition: like new (used), Year of construction: 2015, operating hours: 7 h, fuel type: electric, mileage: 7 km, lifting capacity: 1,800 kg, This electric pallet truck from the GERMAN brand STILL comes from 2015;The pallet truck has a capacity of 1,800 kg;The pallet truck has a battery from 2015 with an automatic filling system Equipped with an INTERNAL charger ONLY 7 hours on the counter;Spoons 1,000 mm, suitable for small spaces and in the truck Make an appointment for a test drive or order the pallet truck in our webshop. Djb Hl Rsvm A S De U Rsut

Condition: good (used), max. wheel diameter 1000 mm Djb Hloudn E Se R U Reut gear width 160 mm max. module 7 min. module 0,4 total power requirement 8 kW weight of the machine ca. 5,6 t This machine is set up for shaping and drawing spur and helical gears using the hobbing process. By means of a special device, gears can also be produced using the hand-piece method. Cutting wheels with a pitch circle diameter of approx. 4" = 100 m/m are normally used. As the machine works according to the hobbing method, all numbers of teeth can be cut with just one cutting wheel of a particular module. Dimensions for external gearing: - largest wheel diameter for pinions: 1000 mm - Largest wheel diameter for helical gears: 750 mm - largest tooth width: 160 mm Dimensions for internal gearing: - Largest wheel diameter for pinions: 750 mm - Largest wheel diameter for helical gears: 750 mm - Largest tooth width: 130 mm - largest pitch to be planed in steel: 8.5/8.6 module - Bore of the table spindle: 160 mm - Number of ram strokes: 6 - Number of cutting wheel feeds: 8 Additional information + accessories: - Column extension 50 mm - Max. Max. installation height 2540 mm - Year of construction unknown - including change wheels

Condition: used, Year of construction: 1998, operating hours: 60,931 h, machine/vehicle number: IntNr231212, Star Bros. SR - 32 Year 1998 Operating hours 60931 IntNo231025 Control: CNC Fanuc 18i Tb Machining diameter: max. 32mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 (driven and smooth tools) Duebewh R Uzo Hl R U Rst Coolant used in the machine: Oil CE declaration of conformity According to seller: Fanuc cross drive drive system defective and was deactivated by Star Micronics. Dimensions of the machine 1700x2512x1700 mm Weight of the machine 2900 kg Bar loading magazine FMB TURBO 5-42. Bar capacity 5-42 mm attachment variant "A" Hinged belt conveyor MAYFRAN Kraft and Bauer extinguishing system and CO2 extinguishing agent container (10 kg) Operating and maintenance manual Operating tools Machine dimensions: approx. 1700 x 2512 x 1700 [mm] Machine weight: approx. 2900 [kg] Loading magazine dimensions: approx. 4500 x 1000 x 1800 [mm] Weight of loading magazine: approx. 1800 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 200 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Used. Star SR - 32 Year 1998 Operating hours 60931 Control: CNC Fanuc 18i Tb Machining diameter: max. 32mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 (driven and smooth tools) Coolant used in the machine: Oil CE declaration of conformity Operating and maintenance manual Operating tools According to the sender: Fanuc transverse drive system defective and was deactivated by Star Micronics. Machine dimensions 1700x2512x1700 mm Weight of the machine 2900 kg Bar feeder FMB TURBO 5-42. Bar capacity 5-42 mm attachment variant "A" Hinged belt conveyor MAYFRAN Small extinguishing system Kraft and Bauer and extinguishing agent container CO2 (10 kg) Machine dimensions: approx. 1700 x 2512 x 1700 [mm] Machine weight: approx. 2900 [kg] Loading magazine dimensions: approx. 4500 x 1000 x 1800 [mm] Weight of loading magazine: approx. 1800 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 200 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, mileage: 334,062 km, Year of construction: 2001, Serial number: YV2E4CBA31B29xxxx Please contact ATS Norway AS for more information Dusb Hsvgx E Tel R U Rst Please provide reference number upon request: 18503 Specifications: - 2001 model - 334,062 km - Eu-approved until 16.08.25 - Euro 2 - Engine brake - Manual transmission - Century superconstruction - Ramsey winch - Cradles - Internal width plan: 2,200 m - Internal length plan: 5,664 m - Climate - Light - Radio - Delivery by agreement Description: Volvo FL6 is sold with cradle and winch. Everything works as it should according to the previous owner. The truck starts very easily, and there is a service history. Delivery by agreement. Km: 334062 Technical approved: Yes EU-approved until: 16.08.2025 Own weight: 6300 Total Weight: 7490 Payload: 1115 Width: 250 Length: 790 Euro: 2 Gearbox: Manual

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Dsb Hjul Etdsl R U Rout Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: used, Year of construction: 2016, operating hours: 44,682 h, machine/vehicle number: IntNr231032, IntNo231032 HANWHA CNC sliding headstock lathe XD20 V (Y2), year 2016/10 Dujb Hljwh R Uue R U Ret CNC control FANUC 32i-B with 8 axes Operating hours: 44682 MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 210 Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 3.7 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 80 C-axis with 0.001° stroke Z2 [mm]: 210 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 5 driven drilling/milling spindles modular - (tools 2 x ER16 - 3 x ER11) - Power: [kW]: 1.0 (S6000) - Front drilling unit for 5 drilling quills Rear machining with Y2 axis - Tool carrier for 8 tools - 4 driven ER16 modular drilling/milling spindles - 4 stationary ER16 modular drilling/milling spindles Rapid traverse speeds m/min: 40m/min (X1,Z1,C1,Y1, Z2,C2,X2,Y2) Connected load [KVA]: 15 ACCESSORIES Alignment shoes with leveling elements Service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation (Maintenance and operating instructions incl. parameter list and test report) LCD/MDI color monitor Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for JBS Parts conveyor belt with collecting tray 1° indexing on pick-up spindle Chip conveyor with coolant pump Machine coolant: oil CE declaration of conformity Accessories Bar feeder FMB Turbo 2-20 2-23mm/3200mm attachment variant "A" HD high pressure system SFB M60 eco / 150bar. 24L/min 4valves, switch-over filter 2 x 40um Tank with approx. 280L Hinged belt conveyor Small extinguishing system Kraft and Bauer and CO2 extinguishing agent tank Machine dimensions: approx. 2460 x 1380 x 1730 [mm] Machine weight: approx. 2900 [kg] Loading magazine dimensions: approx. 4220 x 620 x 1800 [mm] Weight of loading magazine: approx. 600 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 300 [kg] HD system dimensions: approx. 1660 x 612 x 1500 [mm] Weight of peripherals & accessories: approx. 300 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Used. HANWHA CNC sliding headstock lathe XD20 V (Y2), year 2016/10 CNC control FANUC 32i-B with 8 axes MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 210 Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 3.7 Maximum pick-up diameter [mm]: 20 max. part length ejection to the fr

Condition: used, Year of construction: 2019, Serial number: YF2T36SFGKKN3xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18721 Specifications: - 2019 model - EU-approved until 02.06.2025 - 3 axle - Full side opening - Wheelbase: 132/132 cm - Payload: 33,020 kg Internal measurement: Dusb Hsvg Aguel R U Rjt Height: 3.03m Width: 2.50m Length: 13.40m Outside measurement: Length: 13.80m Height: 4.30m Width: 2.60m Description: 2019 Ekeri cupboard hanger with full side opening. The cupboard hanger is Eu-approved. Delivery by agreement. Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 8980 Total Weight: 42000 Payload: 33020 Width: 260 Length: 1380 Inside lenght: 1340