Used Job-Mann 100-30 for sale (81,261)

Condition: new, Year of construction: 2023, cutting diameter 1100 mm saw band length 12000 x 67 mm cutting width 1,6 mm Capacity 90° - round 1100 mm Feb E Uyreuddc Hewegb Capacity 90° - rectangle 1100 x 1100 mm Capacity 90° - square 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 12.000 kg dimensions of the machine ca. 3300 x 3000 x 5300 mm The KSS 1100 X 1300 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table, which is 1 metre long.

Condition: used, Year of construction: 2005, turning diameter 340 mm turning length 1.000 mm control OSP E 100 L greates pass round over bed 530 mm Swing dia. over traverse guideway 420 mm distance between spindles 1.020 mm axis stroke: x-axis 260 (185 + 75) mm z-axis 1.020 mm C-Axis 360 ° Main spindle: turning speed range - main spindle 38 - 3.800 min/-1 power capacity - main spindel 22 / 15 kW transmission ratio 1 spindle nose JIS A2-8 spindle bearing diameter 120 mm max. usable bar diameter 70 mm C - Axis 0,001 ° chucking diameter 250 mm turret: number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 25 mm Drill shank diameter 40 mm tool taper VDI 40 Spindle speed - driven tool stations 45 - 4.500 min -1 power capacity - driven tool-stations 5,5 / 3,3 kW Tailstock: diameter of quill 90 mm quill stroke 120 mm taper of center MT 5 feeds: rapid traverse ( X / Y / Z ) 20 / 10 / 25 m/min rapid traverse C-axis 200 min/-1 feed speeds 0,001 - 1.000.000 mm/min total power requirement 25 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC-Turning- and Millingcenter OKUMA - SpaceTurn LB 300 MC / 1000 Feb Ejtqmr Dj Uyrwsgb - Tool-Drive - C-Axis - Without driven toolholders shown on pictures !

Condition: excellent (used), Year of construction: 2008, INJECTION MOLDING MACHINE KRAUSS MAFFEI KM 300-1000 CX Year of production: 2008 Injection elements: Screw diameter: 50 mm Injection weight: 393.1 g Injection pressure: 2304 bar Injection volume: 432 ccm Closing elements: Closing force: 300 t Clearance between columns: 630x630 mm Table plate dimensions max: 995x1050 mm Ejector: hydraulic Closing system: hydraulic Control: MC 5 Dimensions and weight Machine dimensions LxWxH: 6.5m x 2.2m x 2.3m Total weight: 15000 kg Febjvy Iris E Uyrwegb

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Fsbehv A A Do E Uyrwsgb Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: excellent (used), Gockel G8 el (6130PL) x 5100mm Vertical Spindle Surface Grinder Fgsb E Uyou Tuxdjrweb Serial Number 5908 Digital Readout in X Magnetic Table 800mm x 5100mm 1000mm Dia segmented wheel, Coolant Independent hydraulic pack, Electrical Cabinet,

Condition: used, Vacuum with pump and 3 suction platesused, good conditionmake Schmalztype PVT-3-SPL-300x100-VE SEG 4vacuum generator ejector SEGoperating pressure 5 barload capacity approx. 90 kgadjustablewith vacuum pump pneumaticsuction plates 3 piecessize 300 mm x 100 mmswivelingspace requirement approx. 1200 mm x 600 mm x 900 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Fsbevwf D Rj E Uyrwogb

Condition: ready for operation (used), machine/vehicle number: S6061436, Condition Used Stock Number 412983 This listing is for a CS Cleaver Scientific S0100A-CLE-230V Vortex Mixer. The unit is in full working condition and is ready for immediate release. Fsb E Uevl Az Asyrwogb This Cleaver Scientific variable speed Vortex Mixer combines fast, efficient mixing with minimal vibration. Unlike other vortex mixers using elliptical orbits, the true circular orbit of the CSLVORTEX facilitates uniform sample-vortexing even at low speed. The CombiHead head, which is supplied as standard, accepts many different tube sizes, while the unique overmoulding technology used in its manufacture provides a sturdy plastic core with non-slip TPE that fits optional heads for microplates, microtubes, PCR strip tubes, 15ml and 50ml tubes and blood vials. CSLVORTEX may be used in touch or continuous mode, being activated by simply depressing the sample head and then stopped by releasing the pressure. An optimised counter balance system within the CSLVORTEX minimises vibration and movement of the unit during operation, whereas its lightweight construction and small footprint allow it to be readily transported and used in areas where space is restricted.

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 30 mm, sheet thickness (max.): 30 mm, roller (top) diameter: 400 mm, overall weight: 20,200 kg, total length: 5,850 mm, total height: 2,250 mm, total width: 2,350 mm, bending length: 3,100 mm, side roll diameter: 300 mm, warranty duration: 12 months, power: 38.5 kW (52.35 HP), Equipment: emergency stop, STANDARD Very suitable for bending medium and heavy platine sheet metal or stainless materials Very suitable for bending round, ellipse, oval shapes and materials with various diameters 1-Lower roll and side rolls move linearly up and down with pistons hydraulically connected to the body Protected against overload 2-Upper roll and side rolls are driven by hydromotor and planetary reducer (3 rolls are motor driven) 3-Three digital displays easily read the position of the rolls 4-Hydraulic opening head and automatic upward lifting spindle easily remove the bent part 5-Very easy to use with movable control panel 6-Welded steel construction body 7-SAE 1050 (CK 50) induction hardened, forged or rolled steel spindles 8-Conical bending system 9-Central lubrication system Hydraulic balancing system for parallel movement of the spindles (Ø280 -320 -350 -380 -400 -460) Electronic balancing system (Ø500-550-580-620 -680) 10-Double speed working system OPTIONAL (NOT INCLUDED IN THE PRICE) 1-Automation with NC and CNC control 2-Top crane (elevator) for support in large diameter bending 3-Hydraulic side supports for support in large diameter bending 4-Hydraulic sheet metal removal system 5-Ground and polished balls for special jobs 6-Stepless speed adjustment system Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) BENDING LENGTH: 3100MM CENTER BALL DIAMETER: 400MM SIDE BALL DIAMETER: 300MM MOTOR POWER: 38.5 KW WEIGHT : 20 200 KG THICKNESS WITHOUT PRE-FOLDING : 30MM THICKNESS WITH PRE-FOLDING : 25MM WORKING SPEED : 1.5 – 5 M/MIN (MIN) LENGTH : 5850 MM WIDTH : 2350 MM HEIGHT : 2250 MM Fjb E Uyrsvu Rz Aowjgb COUNTRY OF ORIGIN : TURKEY CONTACT US FOR DIFFERENT MODELS.

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Fgjb Esi D Daqe Uyrwob Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Centrifugal fan REITZ Type: MAE 031-007130-00 Serial no. 601475 Year of construction 2017 Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 250 mm (spigot diameter in the base plate) Air outlet 245 x 195 mm Motor speed 2915 rpm Fgobor H Sqys E Uyrwjb Motor power 7.5 kW Mains connection 400 Volt 50 Hz - Fan wheel with 9 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 310 x 260 mm - Sturdy metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight centrifugal fan 200 kg very good condition, only completed test run

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Fsbstximvo E Uyrwegb Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: excellent (used), Year of construction: 1995, CNC GEAR TESTER, HOFLER – ZP 630 Make: HOFLER Model: ZP 630 CNC: ZEIZZ YOM: 1995 Max gear diameter: 650mm Vertical axis: 1000mm Max workpiece length approx. : 1500mm Other Info: Fob E Uyop Ebpdsrwjgb THE MACHINE IS THE BEST ONE FOR TESTING LONG SIZE SHAFTS AND PINIONS

Condition: ready for operation (used), machine/vehicle number: 000019007289, Condition Used Stock Number 413011 This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condition and is ready for immediate release. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: 85% Fsboup Nbgj E Uyrwogb Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

Condition: good (used), Year of construction: 2009, Three Spindle. Automatic tool changer on 3 spindles. 25 metres In-Feed. 45 metres Out-Feed. Feb E Uysva El Horwjgb Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. Swarf Brush. 1000mm Section Capacity.

Condition: new, Year of construction: 2025, Siemens ONE control system Turning diameter over bed: 800/950/1100 (optionally 1200) mm Center distances: 2,000 to 16,000 mm Spindle bore: 140/220/320/360 and 450 mm Parat holder, Multifix, Recolver, C-axis ... ++ Wide range of options and automation available on request ++ Fgsbeqa Dicj E Uyrweb

Condition: used, machine/vehicle number: PR30-1005, Proseal PR30 Very simple compact traysealer with a high output with its rotating table system. Have a look at the video for an impression. Fjbeku H Nhs E Uyrwjgb

Condition: new, Experience unrivaled precision and performance with ROBBI cylindrical grinding machines. Our machines offer grinding lengths starting from 1000mm and are available in semi-automatic and CNC versions. With a grinding diameter of 300-1000mm, you have unlimited possibilities. Some machines are quickly available from stock! Discover our extensive range of special accessories that make your cylindrical grinding machine even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in ROBBI's many years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here is a selection of possible machine types, and we are happy to offer additional models or custom machines upon request: TECHNICAL SPECIFICATIONS: Model Omicron CNC 60 or semi-automatic series Grinding diameter: 595/695 mm Grinding length: 1000 - 3000 mm Max. workpiece weight between centers: 1200 kg TECHNICAL SPECIFICATIONS: Model Omicron CNC 36/32 or semi-automatic series Grinding diameter: 320 / 355 / 455 mm Grinding length: 630 - 2030 mm Max. workpiece weight: 120 (opt. 250 / 300 opt.) kg CONVENTIONAL MACHINES: TECHNICAL SPECIFICATIONS: Model Omicron E Series Grinding diameter: 360 - 430 mm Grinding length: 630 - 1530 mm Workpiece weight between centers: 200 - 300 kg Further technical data available upon request or in the attachment. Fjb E Uyrodzba Iswogb ACCESSORIES (EXAMPLE FOR OMICRON CNC 60): CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tank Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for the spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and operational parameters: - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The grinding machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially created software. EASY PROGRAMMING: Complex programs can be created without knowledge of ISO programming. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the different parameters step by step. The programming of the working cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be changed quickly and intuitively. Our services for you: • On-site consultation and finding solutions • Organization of machine transport to your facility • Installation, assembly, commissioning, and ready-to-use handover, and more.

Condition: good (used), Distance between points 1000 mm Stitch height 230 mm Main motor power 9.2 Kw Working wheel dimensions (h x w x d x w) 500x80x203.2 mm Feb E Ujtrgnzeyrwogb Ø max to grind 460 mm Tailstock cone MORSE 4 MORSE 5 tailstock nose cone Max. Z-axis travel 1115 mm Max. X-axis travel 260 mm Approx dimensions (length x width) 440x370 cm Approx. weight 4700 Kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 54,535 h, Functionality: fully functional, clamping force: 3 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13973 Manufacturer Krauss Maffei Type of machine KM 300 – 1000 C1 Year 2006 Working hours 54535 h Controlversion MC 4 Screentext German Location Eschweiler - Germany Fjb Eoucc Ave Uyrwsgb Clamping unit: Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 19 kW Adjustable barrel heating zones 5 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 14370 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 150 X: 900 mm Y: 1400 mm Z: 2500 mm C: 90 ° Additional Options: - 1 x air valve - 2 x core pulls - 16 x hotrunner controllers

Condition: new, overall weight: 1,300 kg, empty load weight: 450 kg, maximum load weight: 850 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 195/55r10c, *Tiltable car trailer with *grid attachment* and 100 km/h from *trailer manufacturer* STEMA type MUT O2 . With the sturdy *leaf grate attachment*, the *box trailer* is suitable for transporting *garden waste*, *small furniture, firewood, lawn mowers, quad bikes, ATVs* and *small machines*. As standard equipment, the *steel trailer* has a *crank for tilting the loading area*, *drive-over flap*, *100km/h approval*, *support wheel*, eight *lashing eyes*, *high-quality locks*, *galvalum galvanized side walls, hot-dip galvanized grid attachment* and a *V-drawbar*. This *car trailer* is also available in different versions, for example as a *canvas trailer* or open. We also offer accessories such as *side wall attachments*, *tarpaulin & frame*, *flat tarpaulin*, *drawbar box*, cargo net, *drawbar protection cover, anti-theft device and lashing straps* at a reasonable price. Fjb E Uyeiwh Nmjrwjgb

Condition: as good as new (ex-display), Infeed width: 720 mm Fjb Eegabfqj Uyrwsgb Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: used, Size of the roller conveyor: 3300 x 1100 mm speed: 36m/min Fjb E Uyetwnd Derwegb roller diameter: 65 mm 2 strips: 1050x370mm speed: 10m/min

Condition: new, Brand new, highly stable CNC head turning machine series from the KDB series. Whether you desire conventional or CNC-controlled precision, we offer you the optimally fitting solution with controls from Siemens, Fanuc, or Fagor. Choose from our extensive range of accessories, including the optionally available C-axis and much more. KDB 2000 available immediately. Further models with the following technical specifications available as CNC and conventional: TECHNICAL DATA: Faceplate diameter: 1600|1800|2000 | 3000 mm Turning diameter: 1600|1800|2000 |3000 mm Fjb E Uyrsi Aqdqewogb Turning length: 700 mm Spindle bore: 230 mm Spindle nose: A2-15 Spindle speeds: L:10~50, M: 50~150, H: 150~400 1/min Spindle motor: 37 kW Travel - x: 900|920||1020 mm Travel - z: 1500 mm Servo motor X-axis: 1FK7101, 4.3 kW, 27 Nm Servo motor Z-axis: 1FT7105, 11.7 kW, 65 Nm Rapid traverse in X and Z directions: 5 m/min Machine weight approx.: 15 t Space requirement approx.: 4950mm (with conveyor: 6610mm) x 3100mm x 2750 mm - Conventional or with CNC control Siemens/Fanuc/Fagor - Optional with C-axis and additional extensive accessories - Bed longitudinal or transverse - Also available with tailstock and more. Are you interested in the brand new, highly stable CNC head turning machine series from the KDB series? Do not wait any longer and contact us today to find the optimal solution with controls from Siemens, Fanuc, or Fagor. Choose from our extensive range of accessories, including optional C-axes and much more. The KDB 2000 is available immediately, so do not hesitate! Send us your machine requirements, and we will adapt the machine to your needs. Take advantage of the favorable leasing and hire purchase conditions from our leasing partners. Just ask us about it! We are happy to organize the delivery free to your doorstep, including installation, commissioning, and turnkey handover with instruction. Do not hesitate and contact us now! Send us your machine requirements, and we will tailor the machine to your needs! Image shows KDB 2000 (turning diameter 2000mm) Take advantage of the favorable leasing and hire purchase conditions from our leasing partners: Inquire with us! We are also happy to organize the delivery free to your doorstep, including installation/commissioning and turnkey handover with instruction.

Condition: new, overall weight: 2,700 kg, empty load weight: 820 kg, maximum load weight: 1,880 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50R13C, 3-S tipper from trailer manufacturer HAPERT model COBALT HM-2 2700kg 305x180x100. In our opinion, Cobalt tippers from Hapert are extremely stable, very well equipped and also have a fair price. The high loader car trailer is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the tipper trailer at a glance. Fobsrx S She E Uyrwsgb It has an extremely sturdy steel frame, hot-dip galvanized in an immersion bath, 70 cm aluminium dropside attachment, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium dropside walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000 kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for Hapert three-way tipping trailers. Here you will find a grid attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: new, overall weight: 1,000 kg, empty load weight: 560 kg, maximum load weight: 440 kg, loading space length: 2,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 155r13c, Highly visible sales trailer for snacks or goods. Our* snack trailers* are manufactured in an insulated sandwich construction. A very stable frame, welded and hot-dip galvanized, provides the basic stability. The flaps and doors have a welded frame so that the sales box is permanently stable. A proper personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich case body has a galvanized sheet steel outer skin which is also powder-coated. The insulation is a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The *snack van* is supported by 4 crank supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *food*, *beverages*, *fast food*, *low food*, *non-food,* * *street food*, *sales goods* and much more. The standard equipment of the sales trailer at a glance: *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, four stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. Fjbjpfcpfs E Uyrwsgb As accessories for our *sales trolleys* we offer further *sales flaps*, *tarp triangles*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, PVC on floor, *100km/h shock absorber* and *anti-theft device*.