Used Doosan Dx140Lc for sale (414)

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC spindle taper BT40, spindle power 18.5 kW, Fanuc control, coolant, swarf conveyor and probe. Celnou T Iybj El Tgjrb

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor Csln Eot H Nbujl Tgerb

Condition: good (used), Year of construction: 2018, operating hours: 755 h, General information Field of application: Construction Drivetrain Make of engine: Kubota D1005 Crsloq Eauijn El Tgob Weights Empty weight: 515 kg Functional Capacity: 2 m³/m Condition Technical condition: good Visual appearance: good Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 2.7x1.32x1.1 Working pressure: 7 bar Additional information Please contact Sales Department for more information

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Crjln Elethb Ice Tgeb Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1500 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Crjln Eoiy Nppol Tgob Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning Creln Esullmdol Tgsb * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Csln Esvhpr Hjl Tgorb Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter Crsln Eoqqivvsl Tgob 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: reconditioned (used), Year of construction: 2006, operating hours: 13,584 h, turning diameter over cross slide: 770 mm, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 37 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,050 mm, total length: 42,640 mm, total width: 22,000 mm, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe “DOOSAN mod. PUMA 400B” with Fanuc 21i-TB CNC Creln El Tjtvprcegeb

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P126TI, General information Field of application: Construction Serial number: EDIOAO183496 Weights Empty weight: 2.985 kg Functional Generator capacity: 275 kVA Other information Fuel consumption: 43 Liter/Hour at 75% Load Generator: Mecc Alte ECO38 1L4 Frequency: 50 Voltage: 400 Crjlsr H A D Aon El Tgeb Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 470 l Transport dimensions (LxWxH): 3,96x1,36x2,17 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: good (used), Year of construction: 2018, operating hours: 412 h, General information Field of application: Construction Drivetrain Make of engine: Kubota D1005 Weights Empty weight: 515 kg Functional Capacity: 2 m³/m Coln El Toq Eau Hjgorb Condition Technical condition: good Visual appearance: good Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 2.7x1.32x1.1 Working pressure: 7 bar Additional information Please contact Sales Department for more information

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: FANUC, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, table height: 560 mm, table load: 300 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 34, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Csln Eou T Hg Tol Tgjrb

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P086TI-1, General information Field of application: Construction Serial number: P086TI-1 Weights Empty weight: 1.950 kg Functional Generator capacity: 165 kVA Other information Fuel consumption: 26.7 Liter / Hour at 75% Load Cjln El Tjkhnrdsgerb Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Transport dimensions (LxWxH): 3,35x1,13x1,8 Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Condition: good (used), Year of construction: 2019, operating hours: 268 h, General information Croln El Tjq Eav Segjb Field of application: Construction Drivetrain Make of engine: Kubota D1005 Weights Empty weight: 515 kg Functional Capacity: 2 m³/m Condition Technical condition: good Visual appearance: good Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 2.7x1.32x1.1 Working pressure: 7 bar Additional information Please contact Sales Department for more information

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: MV0055-000189, Vertical machining center with 3 axes with automatic rotopallet DOOSAN DT 360D/40 FANUC 0I-MD Accessories: chip conveyor Meta with 300 litres tank litres high pressure pump Calpeda pump for washing predisp. Robot interface pre-set Locking... Csln Eoga Efcol Tgorb Total auto switch-off Tool life management

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P126TI-II, General information Field of application: Construction Serial number: EDIOC0183027 Weights Empty weight: 3.100 kg Functional Generator capacity: 330 kVA Other information Fuel consumption: 47 Liter per Hour at 75% Load Generator: Mecc Alte ECO38 2L4 Frequency: 50 Celn El Ter H A D Hogsrb Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 470 l Transport dimensions (LxWxH): 3,96x1,36x2,17 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: good (used), Year of construction: 2018, operating hours: 606 h, General information Field of application: Construction Colnoq Eau Uo El Tgerb Drivetrain Make of engine: Kubota D1005 Weights Empty weight: 515 kg Functional Capacity: 2 m³/m Condition Technical condition: good Visual appearance: good Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 2.7x1.32x1.1 Working pressure: 7 bar Additional information Please contact Sales Department for more information

Year of construction: 2007, Condition: used, machine/vehicle number: VM640033, Vertical machining center with 3 axes DOOSAN ACE-VM640 FANUC 21I-MB Accessories: Chip conveyor belt Cslegay Ngen El Tgorb Remote electronic handwheel Automatic high-pressure cooling system pressure through the spindle line

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Serial number: DP180LA Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA Other information Cjln El Tekhmkbsgjrb Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Arjen van Dijk or Kenny Bongers for more information

Condition: good (used), Year of construction: 2008, operating hours: 9,267 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of spindles: 60, tool length: 550 mm, tool diameter: 250 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Creln El Tjtvf Smegjb

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP126LB, General information Field of application: Construction Weights Empty weight: 3.382 kg Functional Generator capacity: 410 kVA Other information Crelnjkhmi Ee El Tgjb Fuel consumption: 57.1 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 625 l Transport dimensions (LxWxH): 4,15x1,4x2,1 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: like new (used), Year of construction: 2022, operating hours: 259 h, turning diameter over cross slide: 790 mm, turning length: 2,124 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 35 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, 2-axis CNC lathe "DOOSAN DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Crsln El Tjqrr Nwjgjb

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, turning diameter over cross slide: 900 mm, turning length: 2,001 mm, turning diameter: 650 mm, spindle bore: 166 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 45 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, total height: 2,170 mm, total length: 6,750 mm, total width: 2,250 mm, overall weight: 11,750 kg, bar passage: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe “DOOSAN mod. PUMA 480L” with Fanuc 21i-TB CNC complete with “AUTOBLOK K5Z” steady rest Coln Eou Ut Elol Tgsrb

Condition: good (used), Year of construction: 2011, Functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Crjln Eljtvl U Hj Tgsb

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, workpiece height (max.): 1,200 mm, workpiece diameter (max.): 1,310 mm, workpiece weight (max.): 1,600 kg, total height: 3,330 mm, total length: 7,060 mm, total width: 4,270 mm, table width: 800 mm, table height: 800 mm, overall weight: 21,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 37 W, spindle nose: ISO 50, number of slots in tool magazine: 40, tool length: 550 mm, tool diameter: 135 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer “DOOSAN mod. HM8000” with CNC Fanuc 31i-A Crslju Rrhtjn El Tgob