Used Bimak 35 Mt/C for sale (40,853)

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. Infeed with blocking unit & turning device. The palletizer builds single rows of bundles which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26001X.30 Serial Number blocking unit: 152 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With Slip sheet dispenser Empty pallet dispenser (model): PT Cgjb Hbfshrigqjlhot Reference-# empty pallet dispenser (pallet terminal): 26001X.40 Includes pallet conveying, reference-no: 26001X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Color: Blue Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: Cgjb Hbfloup T Uqshjt approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Cobehrmk Ro Hbflhjgt Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: excellent (used), Vötsch Type: VCL 4006 Vötsch temperature and climate test chamber, air-cooled 32 bit S!MPAC* control with touch panel Potential-free contact for test material switch-off Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system TCP/IP interface Large observation window Test room lighting 1 pipe feed-through 50 mm 2 insertion grilles Air-cooled cooling circuit Humidification bath Calibration of 2 temperature values and 2 humidity values Test chamber capacity 64 liters Performance for temperature tests -40 to + 180°C Temperature deviation temporal ±0.3 to ±1.0 K Temperature homogeneity in space ±0.5 to ±2.0 K Rate of change Cgeb Hbju Spxljflhjt Heating 3.5 K/min Cooling 5.0 K/min Heat compensation max.800 W Temperature calibration value +23 °C and +80 °C Performance for climate tests VCL Temperature range +10 to +95 °C Humidity range 10 to 95%r.H. Humidity deviation over time ±1 to ±3 %RH Temperature deviation temporal ±0.3 to ±0.5 K Temperature homogeneity in space ±0.5 to ±1.5 K Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: Width 760 mm Depth 980 mm Height 1070 mm Sound pressure level: 56 dB(A) Nominal power, max. 1.8 kW Rated current: 8.0 A Electrical connection: 1/N/PE AC 230 V ±10 %, 50 Hz Refrigerant: R 404A Weight: 235 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): straight Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26046.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Cgeb Hbflohrmk Uehjt Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26046.40 Includes pallet conveying, reference-no: 26046.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 24 KW Rated current: 42 A Refrigerant: R-404A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate Cgob Hbfletz Rl Dohjt 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side / längs Cjb Hbfjhrmlcjlhegt Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26150X.30 Serial Number blocking unit: 75 Infeed with flying cross (turning device) for bundles Serial Number turning device: DK 5 Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26150X.40 Serial number empty pallet dispenser (pallet terminal): 53 Includes pallet conveying, reference-no: 26150X.50 Conveying for a pallet width of 800 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: excellent (used), Here we offer you a Vötsch emission chamber. Water cooled Test chamber volume 1000 liters (usable) (916) liters Adjustment tank 480 liters Performance for temperature tests: Cgeb Hsi Hbylsbflhst Temperature range +20°C to +130°C Temperature deviation temporal K ±0.1 to ±0.3 Temperature deviation spatial K ±0,5 Temperature gradient K 1 Temperature rate of change: Cooling K/min 0.3 Heating K/min 0,4 Performance for climatic tests: Carrier gas conditioning with climatic module according to the evaporation principle Temperature range +20°C to +130°C Humidity range 5 to 95% Dew point range +5°C to +60°C Humidity deviation in time % ±1 to ±3 Carrier gas exchange rate 0.1 to 1.8 chamber volume per hr. Capacity range for desorption Desorption temperature up to max. +240°C, adjustable Test chamber surface temperature between +220°C and +240°C Purge rate max. 4 m³/h Test chamber dimensions: Width 750 mm Depth 1630 mm Height 750 mm test chamber door 670 x 670 mm Outer dimensions: Width 1350 mm Height 2950 mm Height 2050 mm rated current 32 A nominal power 19,0 kW Electrical connection 3/N/PE AC 400V ± 10% 50Hz Weight 1200 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VCE 1000/S Condition: used / used Scope of delivery: (See picture) Sale ex location (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Cgjbeu Au Ute Hbflhet Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Internal dimensions (net) H approx. 2150 mm W approx. 3000 mm D approx. 6000 mm Air circulation system (on chamber rear wall) Width approx. 800 mm External dimensions with machine unit and without control cabinets Height approx. 3360 mm Width approx. 3320 mm Depth approx. 8620 mm Machine room, attached to the rear wall of the chamber Height approx. 2340 mm Width approx. 3320 mm Depth approx. 1500 mm Electrical control cabinet, mounted on the side of the base frame Height approx. 2340 mm Width approx. 2400 mm Depth approx. 600 mm Chamber door (double-leaf) Height approx. 2150 mm Width approx. 3000 mm Pedestrian door (single-leaf) Height approx. 1900 mm Width approx. 900 mm Lighting (switch next to pedestrian door) 4 incandescent lamps 60W Feed-throughs 4 pcs. 125 mm ∅ Floor load capacity 30,000 N/m² (surface load); 2,500 N per polyamide wheel Ø100mm; 4,000 N for a wheel with 4 cm² Ceiling opening (clear dimensions of the lower disk) Length approx. 600 mm Width approx. 700 mm Quantity: 10 pieces Ceiling load: 10 SoSi radiators + 1 person 90 kg Working temperature range: Temperature range -40 °C ... +120 °C (discontinuous) Cooling speed: approx. 1 K/min. linear from 80°C to -40°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. At temperatures < (-20°C) the recirculated air volume is reduced by 50%. (e.g. PV 1200) Heating speed: approx. 1 K/min. linear from -30°C to +90°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. (e.g. PR 308.2) Test specimen mass: 600 kg aluminum (vehicle - partial body) Working range climate without sunlight simulation: Temperature range: +10 °C ...+95 °C Temperature constancy: ≤ ± 0.5 K (temporal) Temperature constancy: ≤ ± 2 K (spatial) Humidity range: 20 ... 80 % r.h., without thermal load Dew point temperature range: -2 °C ...85 °C without thermal load Climate working range with sunlight simulation: Temperature range: +23 °C ...+50 °C Temperature constancy: ≤ ± 0.5 K (temporal) Humidity range: 20 ... 70 % r.h., with thermal load Dew point temperature range: -2 °C ...43 °C without thermal load Thermal load of the SoSi: Max. 10 kW Temperature and humidity instances: Temperature The following maximum deviation is specified for the temperature in the climate and temperature range (including measurement uncertainty and with test material): Blow-out after 15 minutes: ±1K Intake after 45 minutes: ±1.5K (external sensor) Humidity For the relative humidity at the operating point 80°C / 80% r.h. the following maximum deviation (including measurement uncertainty and with test material) is specified: Blow-out after 30 minutes: ±3% r.h. Intake after 60 minutes: ±3% r.h. (external sensor) Connection and consumption data: Air-cooled refrigeration unit, maximum air temperature +38°C Refrigerant R 404 A and R23 Water supply for humidifier: Approx. 40 l/h = 40 kg/h installed steam output, demineralized water, electrical conductivity 5-20 μS/m Mains connection: 400 V; 3 PH + N + PE; 50 Hz Connected load: 250 kVA, 350 A Connection according to VDE 0110 group 2: 5x185 mm2 CU On-site fuse protection: 355 A Air circulation volume (FI-controlled): 24,000 to 28,000 m³/h FC basic setting: 50% (achievement of the parameters) Technical data solar simulation: Cgjbotrmm Ne Hbflhjt Manufacturer: BF Engineering GmbH Type: G-BEM-1119 Number of lights: EPSU 2 x 2k_HQI Ballast: 10 Ignitor: IGC-4k-03 Light source: OSRAM HQI 2000W High Flux 3〜/ N / PE

Condition: good (used), Vötsch Type: VT 7021 Air-cooled temperature test chamber Cgob Hbouuf Rneflhst Operating terminal Color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature limiter min./max. RS 232 serial interface Schuko socket potential-free contact for test material switch-off Air-cooled refrigeration unit 1 lockable door, single-handed operation Calibration of 2 temperature values Mobile version 1x feed-through, NW 80 mm 2x feed-through, NW 125 mm Test chamber volume 210 liters Temperature range -70°C to +180°C Temperature deviation in time ± 0.2 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min Max. heat compensation 800 W Test chamber dimensions: Width 560 mm Depth 570 mm Height 630 mm External dimensions: Width 850 mm Depth 1250 mm Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50Hz Rated power approx. 1.8 kW Rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WK-1000/40/5 Weiss climatic test chamber with Weiss air-cooled condenser S!MCON / 32 control unit Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm, External dimensions: Height 1995 mm, width 1390 mm, depth 1855 mm, Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power 23 KW Rated current: 33 A Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 6.1 K/min Cooling: 6.7 K/min Heat compensation max. 5000 W Data for climate tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % r.h. Dimensions incl. feet Width x depth x height: 1190 x 1120 x 1093 mm Refrigerant: R404 A 5.2 kg Weight: approx. 840 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgjb Hbflou Ap Smohst

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Cgsb Hbfou Nh Rbolhjt Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Cgjb Hbfevaxq Nelhot Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Cob Hsrknagsbflhsgt Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch Cgob Hbjrbiyfoflhot The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Ceb Hjrm Rihsbflhegt Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgeb Hbfloru Dzuehot

Condition: excellent (used), Here we offer you a Memmert precision incubator. Memmert precision incubator 749 litres ICP appliances with powerful CFC-free refrigeration units with automatic hot gas defrosting hot gas defrosting device and motorised air circulation in the interior Electronic fuzzy supported PID - process controller with permanent power adjustment and a time-saving self-diagnosis system for fast fault finding Language setting Alphanumeric text display Internal log memory with 1024kB for the storage of actual temperature, set temperature, and error states with time stamp Control of the unit and logging of actual values on MEMoryCard XL Program sequence control for up to 40 ramp segments Adjustable air turbine from 10%-100% (ICP units only) Integrated weekly timer with group function (e.g. all working days) Retractable push/turn control for easy operation of the unit Optical alarm display Model ICP 800 Interior: Width 1040 mm Height 1200 mm Depth 600 mm External dimensions: Width 1198 mm Height 1895 mm Appliance depth 756 mm Interior volume 749 litres Power 1200 W max. number of insertable trays 14 / 12 max. load per insertion tray 30 kg max. load per appliance 160 kg Setting temperature range ICP 800 -12°C to 60°C Setting accuracy 0.1°C Working temperature range ICP 800 -12° to 60°C Weight 227 kg Type: ICP 800 Condition: used / used Cob Hjg If Huebflhsgt Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!)

Condition: excellent (used), Type: HT 7010 Heraeus Vötsch temperature test cabinet, water-cooled Temperature deviation in time ± 1 K Temperature deviation in space ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x side feedthrough 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Cgeb Hbjhhyz Ssflhot Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you Thermotron temperature chamber. Water cooled Thermotron temperature chamber SE-1000-6-6 Inner dimensions: WxDxH 1000 x 1000 x 980 mm Working volume: approx. 980 liters Temperature range: -70ºC to 180ºC Heating up total : ca 4,1 K Cooling down total : ca 1,2 K Heating power in ºC/minute -65º to 71ºC: 6.8ºC Heating power in ºC/minute -65º to 180ºC: 5.6ºC Heating capacity in ºC/minute -40º to 85ºC: 6.5ºC Cooling capacity in ºC/minute 85º to -40ºC: 4.7ºC Cooling capacity in ºC/minute 71º to -65ºC: 3.7ºC Ceb Heixtitjbflhegt Cooling capacity in ºC/minute 180º to -65ºC: 4.3ºC External dimensions - WxDxH: 1250 x 1900 x 2200 mm Electrical requirements 400V/5P/N/PE 35 A Refrigerants: R508B and R404 A Approx. weight: 900 kg Type: Thermotron SE- 1000-6-6 For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Cgjbjrkm U Uo Hbflhst Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a bird heat cabinet with nitrogen supply. Vötsch heat cabinet with nitrogen supply Nominal temperature: 250°C Name stream: 10 A Connection value: 6.3 KVA Ceb Hbfljd Ngg Tehsgt Nominal voltage: 400V3coma N)PE AC 50/60hz Nominal power: 6 KW Type: TU 60/60 G-ISO Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you.

Condition: good (used), Here we offer a Binder growth cabinet incubator. Temperature range: 0°C to 100°C 1 stainless steel rack MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections Inner glass door Control of several time and temperature display functions Digital tuning air turbine Without harming the environment Refrigerant R134A Cgjb Hbfsdrv Sdelhot Technical data: External dimensions max WxHxD (mm) 1034x1142x746 Internal dimensions WxHxD (mm) 800x600x500 Volume (l) 240 Max. Load (kg) 70 Type KB 240 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WT3-1000/40 Weiss Temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm Csb Hbfsthhw Aolhsgt External dimensions: Height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 4500 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A Rated power 11.5 kW On-site fuse 32 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-404A Weight: 840 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.