Used Bimak 35 Au/C for sale (83,913)

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens total power requirement 100 kW weight of the machine ca. 16,7 t Feljtumrpoquu Nksgb dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Fgelquuepfatpo Nksb Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: used, Year of construction: 2022, operating hours: 164 h, load capacity: 3,500 kg, lifting height: 6,700 mm, free lift: 2,160 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, ground clearance: 110 mm, front tire type: Trelleborg, front tire size: 315/45-12, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 4,850 mm, wheelbase: 1,800 mm, drive type: Elektro, construction width: 1,420 mm, net weight: 4,561 kg, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 Fgolsvdxnpjquu Nksb - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen - Integrierte Ablagen und Getränkehalter - Anzeige- und Bedieneinheit mit Display, Funktionstasten und Menüführung (spritzwassergeschützt) - MSG 65 Grammer Sitz mit Kunstlederbezug - Haltegriff am Schutzdach vorn und hinten - Mehrhebelbedienung - 3 festgelegte und 2 frei konfigurierbare Fahrprogramme, Energiesparmodus Blue-Q, Sprintmodus für höchste Umschlagleistung auf Knopfdruck - Anzeige des Energieverbrauchs und der verbleibenden Fahrzeit bei aktuellem Batterieladestand - Lithium-Ionen-Batterie 1:1 austauschbar - Automatische Feststellbremse - Curve Speed Control - Intelligente Sitzgurtkontrolle mit Logik-Prüfung

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 660 mm, controller manufacturer: MAZATROL, table width: 750 mm, table length: 1,740 mm, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 820 mm, CONTROLS .. CNC controls MAZATROL WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 1500 mm .. Y-axis travel: 800 mm .. Z-axis travel: 660 mm .. distance spindle nose - table surface (max.): 820 mm TABLE .. table surface (left-right): 1740 mm .. table surface (front-back): 750 mm .. workpiece load (max): 2500 kg SPINDLE / HEAD .. spindle revolutions (min): 35 /min .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 50 TOOL MAGAZINE .. number of positions: 30 .. tool diameter max.: 125 mm .. - with free neighbour positions: 210 mm .. tool length max.: 380 mm .. tool weight max.: 20 kg AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 2 ELECTRICAL SPECIFICATIONS .. mains power supply: 74 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS .. chip conveyor: yes .. coolant unit: no .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Felquewhlm Eju Nkjgb Machine comes without coolant system but with a high-pressure pump. The magnetic plates are not included but can be purchased if you are interested.

Year of construction: 2005, Condition: excellent (used), USED KARCHER BR/BD 55/40 C SCRUBBER WE HAVE 2 VARIANTS - ROLLER HEAD BR - DISC HEAD BD TECHNICAL DATA: Brush working width (mm) 550 Working width of the squeegee (mm) 850 Theoretical capacity (m2) 2200 Tank capacity (l) 40 Fgelqjgd Tpmsuu Nksb Weight (kg) 120 Power supply voltage 24 V Dimensions (L x W x H) 1285 mm x 695 mm x 1115 mm INCLUDES: - Roller brushes / Disc brushes - Collection bar - Battery charger - ATTENTION: THE KIT DOES NOT INCLUDE BATTERY Elements to be purchased according to individual customer order LARGEST SELECTION IN POLAND !!! WE PROVIDE WARRANTY! DELIVERY UP TO 100 KM FREE OF CHARGE ! We offer: - a large selection of washers of this model, in technical condition as well as visually very good - we provide warranty on purchased equipment - we have warranty and post-warranty service - possibility of transport - possibility of shipping the washer by courier Why is it worth to buy the device in BUBU-KAR? Buying machines in our company you are sure that the equipment is in working order, because all machines are serviced by our specialized technical department. You do not have to worry about spare parts, because we have a wide range of spare parts on sale, more than 4 thousand items. Our advantages: - large selection - professionalism - flexibility - knowledge and experience

Condition: good (used), Year of construction: 2005, Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suction: N° 4 suction inlets diameter 180 mm - N° 4 suction inlets diameter 120 mm - N° 4 suction inlets diameter 100 mm Suction speed m/sec 25 Quantity of suction air m3/h 11000 Compressed air kg/cmq 6 Controlled power Kw 43 Overall dimensions: mm 4500 x 2438 - 2030 h Weight kg 8000 Felquu Nshfwfljkogb

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . Fjlquu Nsd Ih H Nokjgb (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Year of construction: 1999, Condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Fgjlektfiaequu Nkeb Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Fgslquswhi Slou Nkeb Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, Year of construction: 2000, table width: 850 mm, table length: 1,450 mm, installation height: 420 mm, overall weight: 24,000 kg, pressing force: 200 t, ram stroke: 200 mm, lifting height: 200 mm, worktable length: 1,450 mm, tool height: 420 mm, PRESS DESIGN .. frame design: C-frame, double sided PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1450 mm .. table surface (front-back): 850 mm SLIDE .. slide force: 200 to .. table surface (left-right): 850 mm .. table surface (front-back): 630 mm .. stroke: 200 mm Fslquu Njwhf Amekogb SLIDE (MECHAN. PRESS) .. slide adjustment: 110 mm .. stroke rate (min.): 30 /min .. stroke rate (max.): 55 /min TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 420 mm DIMENSIONS / WEIGHTS .. total weight approx.: 24000 kg ATTACHMENTS (PRESSES) .. light barrier: yes

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsaw machine with double column guidance and 2° cutting inclination to the table support surface make: HUVEMA - BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device Folquu Nebw H T Dokogb - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Fjlqstu Hy Esuu Nkogb Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: ready for operation (used), Year of construction: 2017, operating hours: 12,750 h, General Data Measurements width 2300 mm Measurements depth 2600 mm Measurements height 1400 mm Machine weight 4450 kg Control Unit Brand ENGEL Model CC300 Fgslqjwg Ic Teuu Nksb Injection Unit Screw diameter 15 mm Clamping Unit Clamping force 350 kN Opening stroke 400 mm Max open daylight 590 mm Mould height min 190 mm Size of mold platens 780 x 400 mm Ejector stroke 100 mm Ejector force for / back 20.1 kN This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available. Application Types Injection Moulding

Condition: excellent (used), Vötsch Type: VTL 60/60 The Vötsch VTL 60/60 is an industrial heating and drying cabinet, specifically designed for the safe drying of coated materials, such as paints and resins. It meets the safety requirements of EN 1539 and is therefore suitable for processes where flammable solvents may be released. Technical specifications: Usable volume: 0.216 m³ (600 × 600 × 600 mm) Nominal temperature: 250 °C Maximum heating surface temperature: over 750 °C Nominal power: 7.2 kW Connected load: 8 kW Minimum exhaust air flow rate: 102 m³/h External dimensions (L × W × H): 1150 × 1000 × 1700 mm Weight: approx. 250 kg Safety features: Fgelqewgcxcsuu Nkeb The VTL 60/60 is equipped with a powerful recirculation fan, which ensures even temperature distribution and effective dilution of solvent vapors. This prevents the formation of explosive atmospheres and ensures safe operation. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI Fgslqorxw Ezeuu Nksb -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

Condition: used, Year of construction: 2006, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 585 mm, controller manufacturer: MAZAK, controller model: MAZATROL 640 M, total height: 3,546 mm, table width: 750 mm, table length: 1,740 mm, overall weight: 13,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 26 W, space requirement length: 5,150 mm, space requirement width: 3,274 mm, CONTROLS .. CNC controls MAZAK MAZATROL 640 M WORKING RANGE -CUBIC- .. X-axis travel: 1500 mm .. Y-axis travel: 800 mm .. Z-axis travel: 585 mm TABLE .. table surface (left-right): 1740 mm .. table surface (front-back): 750 mm .. workpiece load (max): 1600 kg SPINDLE / HEAD .. spindle type: vertical .. spindle revolutions (max): 10000 /min .. drive power: 26 kW .. spindle torque: 529 Nm AXIS DRIVES .. rapid traverse: 18000 mm/min TOOL MAGAZINE .. number of positions: 120 ELECTRICAL SPECIFICATIONS .. mains power supply: 59 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5150 mm .. space requirements -front/back-: 3274 mm .. total height: 3546 mm .. total weight approx.: 13100 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no Folquu Nswhfhcjkegb The system comes without a cooling system as it is connected to a central cooling system. High pressure pump is included. Tool holder SK 50 (Din 69871 A)

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar Fslquuswg Hrgo Nkegb table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 385706, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fslquujnri Eue Nkogb

Condition: used, Heraeus Vötsch Type: VT 4021 Folquuowga Rco Nkogb Heraeus Vötsch Temperature Test Chamber, Air-Cooled Housing dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Interior: Width 560 mm, Depth 570 mm, Height 630 mm Temperature range -40°C to +180°C Temperature deviation over time ±0.2 to ±0.5 K Temperature deviation over space ±0.5 to ±1.5 K Temperature change rate cooling: 3.1 K/min Temperature change rate heating: 2.5 K/min Rated voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.5 kW, Rated current: 7 A 1 x side feedthrough 90 mm Refrigerant: R-404A Weight approx. 325 kg / Volume 210 liters For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2019, total height: 4,532 mm, controller manufacturer: SIEMENS, controller model: 840 D SL, power: 210 kW (285.52 HP), overall weight: 23,000 kg, space requirement length: 13,480 mm, space requirement width: 10,502 mm, CONTROLS .. CNC controls SIEMENS 840 D SL DIMENSIONS / WEIGHTS .. space requirements -left/right-: 13480 mm .. space requirements -front/back-: 10502 mm .. total height: 4532 mm .. total weight approx.: 23000 kg ELECTRICAL SPECIFICATIONS .. total power consumption: 210 kW Fgslquu Nsv Hglbjksb .. mains voltage: 400 V .. mains frequency: 50 Hz asic machine system with 10 stations Station 1: Component loading (multi-axis handling) Station 2: Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling (max. 15,000 rpm) Station 3: Sauter 112 crown turret (3 spindle units) HSK 40 with external cooling 1 SEMA AE2-35/50/NC 2-axis unit Station 4: 1 SE – HSK 50C spindle unit including internal cooling (max. 15,000 rpm) Station 5: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling Station 6: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling 1 SEMA 2-axis unit AE1-35/50/NC Station 7: 1 hydraulic docking unit including C-axis positioning unit (1 2-axis unit SEMA AE1-35/50/NC) Station 8: 1 hydraulic docking unit including C-axis for positioning 1 permanently integrated angle head Benz or equivalent Station 9: 1 2-axis unit SEMA AE3-35/50/NC Station 10: Permanently integrated angle,S-35/50/NC Station 11: Blow-off inside/outside

Condition: ready for operation (used), Rexroth MAC071B-0-TS-3-C / 095-A-2 / S001 Permanent Magnet Motor MNR: R911241380 , SN:MAC071-92272 , used, strong signs of use, 100% functional, scope of delivery as per photos Fslqei D Nfqjuu Nksgb

Condition: ready for operation (used), Fanuc A06B-6078-H211 # 501 Servo Amplifier Module Version C SN:EA8403816, used, normal signs of use, 100% functional, scope of delivery as per photos Fgolqji D Uxasuu Nksb

Condition: new, Fanuc A20B-8100C - A20B-8100 /C PCB-PMC C Languarde Board, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Fgslquu Noi D U Hpjksb

Condition: new, Heidenhain ROD 260 6000 01-03 angle measuring device, . 331 881-35 , SN:10330464 , unused with signs of storage, 100% functional, scope of delivery as per photos Felqei Eavzeuu Nksgb

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Felqoi D Ihusuu Nkegb