Used Icm Smile 80 for sale (52,885)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Belil Hevwlqqe D Iowl Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Ventilation plant ABB Brand: ABB Type: ABY-80-2120 Complete ventilation system for cooling and heating brief description below what is included: -Control center RW165.02 for air treatment compact unit with control, regulation and monitoring functions Bolil Hslk Hvgj D Ijwl -Room temperature sensor - Duct temperature sensor -Outside temperature sensor - Diving temperature sensor -Setpoint converter -Air treatment unit STRATOS ABY - Defrost damper -Air heater water -Cooling battery water -Circulation pumps - Fans -Heat exchanger, water, electricity, battery The plant is still in operation and can be seen on site Contact us for further information if there is interest. Stock no:2001612TKG With reservation for incorrectly presented technical data

Condition: used, Year of construction: 2001, operating hours: 530 h, lifting height: 4,000 mm, fuel type: electric, mast type: duplex, total height: 3,300 mm, color: other, Empty weight: 8.970 kg Lifting capacity: 8.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Lifting capacity: 8000kg - Lifting height: 4000mm - Number of wheels: 6 Wheels - Overhead clearance: 3300mm - Attachment: Fork positioner, Side-shift - Options: Full cabin, Work lights - Mast: Duplex - Year: 2001 - Documentation available: No - Serial number: T32207.0234 - Operating hours: 530 - Battery voltage: 96V Bweliswg Ddyjl H D Isl - Brand/Type: Midac - Capacity: 1440Ah - Drive: Elektric - Transport weight [kg]: 8970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Year of construction: 2004, Item: DP-18231-Pump-APV-W80-80-240 Brand: APV-SPX Type: W+80/80 240 Bwelilstk Hyko H D Isl Brand: APV-SPX Serial number: 3013986 Year: 2004

Condition: used, Year of construction: 2022, Cutting length: 4.300 mm Pusher stroke: 4.300 mm Number of grippers: 10 Feedrate max: 120 m/min SCM HIGH SPEED: Yes Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 340 mm Main motor power: 9 kW Scoring saw: Motoric adjustment Groove cutting function: Yes Labelling: manually Bjlil Hswhfctj D Iewl For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes Workpiece width measuring: Yes Workpiece length measurement: Yes SCM Saw Set: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MAESTRO CUT MANAGER, SCM MAESTRO CUT EDITOR, SCM MAESTRO CUT UTILITY, SCM MAESTRO OTTIMO CUT, SCM MAESTRO OTTIMO IMPORT, SCM MAESTRO PATTERN Conformity marking: CE mark Weight: 4.250 kg Space requirement Length: 7,1 m Space requirement Width: 6,4 m

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Bolil H Dovzmmzj Iswl -Saw blade: Ø 865 x 6 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 27 mm / Ø 120 x 21 mm -Number of teeth: see photo -Weight: 23 kg

Condition: like new (used), Year of construction: 2021, Intended for DMG MORI CLX 450 (never installed, also suitable for other machines) bar length up to 1,600 mm (depending on spindle length) Z-axis axial displacement Belswglmveil H D Iewl 7" Touch control panel Material slide D 26 mm Material slide D 21 mm Material slide D 15 mm Material slide D 12 mm

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, cover plate 355 x 250 mm, external Ø drain nozzle 59 mm, used, good condition, 100% functional Bwsliji D N Nhel H D Isl

Condition: used, Year of construction: 2016, operating hours: 11,349 h, lifting height: 3,230 mm, fuel type: electric, mast type: duplex, fork length: 1,500 mm, total height: 2,780 mm, total length: 3,600 mm, total width: 2,150 mm, color: other, Empty weight: 13.282 kg Lifting capacity: 8.000 kg Fork dimensions: 1.500 x 1.550 mm - Lifting capacity: 8000kg - Lifting height: 3230mm - Maximum fork width: 1550mm - Number of wheels: 6 Wheels - Overhead clearance: 2780mm - Attachment: Side-shift - Options: Work lights, Non-marking tires, Verwarming, Full cabin - Fork length: 1500mm - Free lift: 0mm - Mast: Duplex - Year: 2016 - Documentation available: No - CE mark available: Yes - Serial number: 516343G00041 - Operating hours: 11349 - Battery voltage: 80V - Battery test result: 86% - Brand/Type: Still - Capacity: 1240Ah - Battery year of construction: 2018 - Inspection valid until: 05.2025 Bjlowgyadoil H D Iswl - Drive: Elektric - Transport dimensions: 3600mm x 2150mm x 2780mm (l x w x h) - Transport weight [kg]: 13282kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, first registration: 05/1992, overall weight: 30,000 kg, empty load weight: 5,900 kg, color: other, axle configuration: 3 axles, gearing type: other, emission class: none, maximum load weight: 24,100 kg, suspension: steel, tire size: 9,5R17,5 143/141G, front tire size: 9,5R17,5 143/141G, rear tire size: 9,5R17,5 143/141G, driver cabin: other, Equipment: compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Bwslijwg Rm Usl H D Iel

Condition: new, The R-VT PRO models represent the new generation of the widely used conventional radial drill presses. The unique operating concept simplifies machining and supports the user during the selection of operating parameters. These models allow precise drilling, countersinking, and thread cutting and are an ideal solution for single parts and small batch productions. These radial drill presses are widely used in repair and maintenance operations, tool and steel construction. Bslil H Deuyh Hdo Iowl

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm control Heidenhain TNC 426 tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,2 t In our opinion, the machine is in very good condition and can be viewed under power by appointment. Bslowf D Atoil H D Iowl The chuck on the 4th axis and on the table are not included in delivery. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Bjliloudn Ute H D Iowl Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: new, Schmalenberger SM 80-13/2 pump no. 2016001998/10, item no. 990351501042, unused, with signs of storage, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Bwelisqdm N Sel H D Ijl

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC530 Boliev S Irtol H D Iowl - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm Bwelewfttzjil H D Iol stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec work height max. 1050 mm Number of working hours 32.495 h oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ----- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Condition: used, Year of construction: 2023, operating hours: 116 h, load capacity: 8,000 kg, lifting height: 6,570 mm, free lift: 2,180 mm, load center: 900 mm, mast type: triplex, power: 19 kW (25.83 HP), fork carriage width: 2,180 mm, fork length: 1,800 mm, ground clearance: 110 mm, front tire type: Continental, front tire size: 315/70-15, rear tire type: Continental, rear tire size: 355/45-15, total length: 6,150 mm, wheelbase: 2,300 mm, drive type: Elektro, construction width: 2,140 mm, net weight: 14,050 kg, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 Bwslil H Devfgkhe Iel - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 11 mm/s, table width: 120 mm, retraction speed: 113 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman-B + Touch, power: 12.5 kW (17.00 HP), net weight: 6,200 kg, opening height: 400 mm, passage width: 2,050 mm, 8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V Bovenste type LVD-gereedschap Lager type LVD hydraulisch Optioneel: Willa hydraulische adapter (modifix)trumpf Bweliev Rwk Aol H D Isl Capacity: 80 ton x 2500 mm Backgauge: CNC Locking speed: 130 mm/sec

Condition: used, Year of construction: 1997, machine/vehicle number: 370, Used friction welding machine Make: KUKA Type: RS 80 Year of manufacture: 1997 Bwjliljtq Tb No H D Ijl

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, cover plate 355 x 250 mm, external Ø drain nozzle 59 mm, with riser pipe L = 875 mm, used, good condition, 100% functional Beloi D N Ndjil H D Iowl

Condition: reconditioned (used), machine/vehicle number: 26585, Year of construction: 2018, operating hours: 3,323 h, FRIEDMANN FORKLFITS - REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION AND KNOW-HOW. Used industrial trucks from selected premium manufacturers from us fully serviced, tested and and reconditioned according to FEM-4.004 (UVV) Specifications. Over 350 vehicles in stock Individual conversions of any kind possible on customer request. International transportation with suitable vehicles and customs clearance possible on request. See for yourself and visit us at our factory. Friedmann Forklifts - Our quality promise Full functionality according to FEM-4.004 Maintained & tested (C5 test) battery for electrical appliances (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lifting frame, fork carriage, attachments and hydraulic system, hoses tested Steering axle checked for safety Forks and lifting chains tested Driver's seat and seat belt as good as new New paintwork in original colors and original stickers Industrial truck data Manufacturer: Jungheinrich Type: Jungheinrich EJE 225 -Electric low lift pallet truck Drive type: Electric Load capacity: 2,500 kg Year of construction: 2018 Operating hours: 3.323 Lifting height: 122 mm Bjlsvbv Nlsil H D Iowl Mast type: - Overall height: 1,300 mm Fork length: 1,150 mm Dead weight: 535 kg Load center of gravity: 575 mm Battery capacity C5: 80% (protocol is enclosed with the delivery) Attachments: - Special equipment: - Front tires: Polyurethane Rear tires: Polyurethane Charger: on request

Condition: used, Year of construction: 2020, operating hours: 1,643 h, load capacity: 8,000 kg, lifting height: 4,470 mm, free lift: 1,500 mm, load center: 900 mm, mast type: triplex, power: 19 kW (25.83 HP), fork carriage width: 2,230 mm, ground clearance: 180 mm, front tire type: Continental, front tire size: 315/70-15/8.00, rear tire type: Continental, rear tire size: 355/45-15/9.75, total length: 6,150 mm, wheelbase: 2,300 mm, drive type: Elektro, construction width: 2,160 mm, net weight: 14,300 kg, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 Bwslil Howgfhte D Iel - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: new, GMN TSE 80-16000 / 1.2 high-speed spindle SN:384568, unused in opened original packaging, 100% functional, scope of delivery as per photos Bwsliemq H T Hol H D Isl

Condition: new, SNFA SEB140/NS 7/9CE3 DDL high-precision ceramic roller bearing DEF-STAN 80-34 (1 pair), unused, in sealed original packaging, 100% functional, scope of delivery as per photos Bjlisudrq Sjl H D Ijwl

Condition: new, Schunk SDF KSR-HSK-C63 Ø20 L1 = 80 Tendo hydraulic expansion chuck 0205376, unused in original packaging, 100% functional Bjlil H Doi Ec Nce Iswl