Used Trumpf Trumatic 500R for sale (396)

Year of construction: 2005, Condition: ready for operation (used), Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible. Bjlrev Daf Njagi Tewl

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,280 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Working area: 2,550 x 1,280 mm Punching force: 18 t Maximum sheet thickness: 6.4 mm Maximum workpiece weight: 150 kg Control system: Bosch PNC-P Tool system Tool changer: 21 slots Number of clamps: 3 Coordinate guide: Linear magazine Holder: Mono tool holder with 360° rotation Workpiece system Parts chute: automatic, up to 500 x 500 mm Good parts container: available EQUIPMENT - Stable C-frame - Maintenance-free digital three-phase servo motors - Hydraulic punching head system with closed control loop - Automatic tool length compensation - Programmable stripper movement - Programmable hold-down device - Tool spray lubrication - Punch slug extraction - Chip bucket - Graphic programming ToPs 2000 - CE marking with multi-beam light barriers and quick hydraulic shutdown - Multitool - Thread forming - Deburring and rolling technology - Repositioning cylinder - Sensor for parts slide - Clamping claws that can be opened individually - Vibration-damped installation Bslragiov A Utrj Tswl A deposit of EUR 4,000 is required for transport security.

Condition: ready for operation (used), Year of construction: 1990, Trumpf punching and nibbling machine model trumatic 240 Year 1990 Bwslrasv A Ad Sogi Tol

Condition: ready for operation (used), Year of construction: 2002, operating hours: 11,676 h, Functionality: fully functional, machine/vehicle number: KM-1148, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 3,200 W, punching diameter: 76 mm, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction Belragjv Am Twsi Tjwl - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 112273, laser power: 3,200 W, laser hours: 12,000 h, laser wavelength: 13 nm, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, power: 3.2 kW (4.35 HP), year of last overhaul: 2020, table length: 3,000 mm, table width: 1,500 mm, Trumpf Trumatic Laser L3030 CO2 laser 3.2 KW Belraev A N U Rsgi Tjwl Beam on 12,000 hours Machines on 33,000 hours Viewing possible at any time by arrangement

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function Bolraounh D Dogi Tswl - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Year of construction: 2006, Condition: ready for operation (used), Working range X/Y: 2585mm/1650mm, punching force: 220kN, laser power: 3200W (3.2kW), max. material thickness: 8mm, max. workpiece weight: 200kg, tool positions: 21, positioning speed X/Y: 90m/60m/min, simultaneous: 108m/min. Punching capacity: 900 strokes/min, marking capacity: 2800 strokes/min, laser hours: 14061h, operating hours: 81068h. The laser equipment of the machine has not been used for 8 years, only the punching capacities. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025. Bslrsv Ay N Seagi Tswl

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, punching diameter: 76 mm, workpiece length (max.): 2,585 mm, workpiece width (max.): 1,280 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Technical information according to the manufacturer's brochure TECHNICAL DETAILS Control: TRUMPF CNC control based on the SINUMERIK 840D Passage height in punching mode: 35 mm Passage height in laser mode: 22 mm Maximum sheet thickness in punching mode: 8 mm Workpiece weight: 200 kg Partial slide: 500 x 500 mm Working area (X x Y) without repositioning Combined operation: 2,585 x 1,280 mm Punching mode: 3,085 x 1,370 mm Laser operation: 3,085 x 1,280 mm Punching Maximum punching force: 220 kN Maximum punching diameter: 76 mm Maximum stroke rate: 600 rpm Max. number of tool positions on the linear magazine: 19 with 2 Claws Laser Model: TLF 2400 Power: 2,400 W Sheet thickness mild steel: 8 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 4 mm Distance control: DIAS III Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simultaneous: 108 m/min Positioning speed C-axis: 1 revolution/s Positioning speed C-axis when thread forming: 3 revolutions/s Accuracy Position deviation: ± 0.1 mm Average position spread: ± 0.03 mm Bwolragiovytdwj Tel MACHINE DETAILS Length: 8,100 mm Width: 7,500 mm Height: 2,400 mm Machine weight: 16,000 kg Electrical connection with TLF 2400: 70 kVA Connection pressure: 7 bar Maximum compressed air consumption: 65 Nm³/h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,549 h, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, laser power: 3,200 W, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting Bolragsvzrb Doi Tewl - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Year of construction: 2001, Condition: excellent (used), Make: Trump card Type: TRUMATIC 2000R Year of construction: 2001 Work area: 1270 x 1270 mm Punching power: 18 to Maximum sheet thickness: 6,4 mm Maximum workpiece weight: 75 kg Maximum punching diameter: 76 mm Max speed: 90/60/108 m / min Accuracy: +/-0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Bwolragisdyn Ris Tel Accessories: TOPS 2000 CAM software, tool holder, very good condition, just thin sheets

Condition: excellent (used), Year of construction: 2010, operating hours: 44,973 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection Bwolragiovxivmj Tel - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head

Year of construction: 2003, Condition: good (used), Used quality Trumpf 5kw cnc laser 4metre x 2metre cutting bed Its just been serviced by Trumpf and outputting the same power as new. Very low hours for its age, very good condition, used intermittently on one shift and available to see in operation by appointment: Make – Trumpf Model – Trumatic L 4050 Laser type – TLF 5000TM / 5kw / 5000watts Year of manufacture – 2003 – commissioned 2004 Size – 4metre x 2 metre Bwelraohcw Nzjgi Tel Features – Rotolas tube cutting facility (examples of parts just processed per photographs) Hours – Laser turned on 33861 – Beam on 11480 Fully serviced with Trumpf uk

Year of construction: 2006, Condition: ready for operation (used), A Trumpf CNC laser cutting machine is available. Laser power: 2000W (2kW), travel X/Y/Z: 3000mm/1500mm/115mm, max. sheet thickness mild steel/stainless steel/aluminum: 12mm/6mm/5mm, laser type: TLF 2000TM, connected load: 63kVA. Rapid traverse X/Y: 60m/min, simultaneous rapid traverse X+Y: 85m/min. Machine dimensions X/Y/Z: approx. 10000mm/5300mm/2000mm, weight: approx. 11500kg, laser on: 90834h, beam on: 33269h. Documentation available. On-site inspection is possible. Belsvm Atujragi Towl

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 700275, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,030 mm, travel distance Y-axis: 1,275 mm, punching diameter: 76 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum sheet thickness: 6 mm Punching pressure: 18 t Maximum punching diameter: 76 mm Table load: max. 75 kg Travel path - x: 1,275 mm Travel path - y: 2,030 mm Control Control type: CNC MACHINE DETAILS Connection value: 17 kVA Bwjlovtckasragi Tel Mains voltage: 400 V Machine weight: approx. 10 t EQUIPMENT - Documentation available

Condition: used, Year of construction: 2007, - Siemens SINUMERIK 840D CNC control system - TruFlow 2700 Laser - Trump SheetMaster 1600 - Year of construction 2007 - Machine not fully functional The following parts have been replaced by Trumpf since 2022 - 11/22 Retrofit kit K01 Box PC from 620 to 627C - 12/22 UE module - 05/23 Compressor - 06/23 A-mirror - 02/24 Power Tube transmitter tube - 09/24 Conveyor belt Specifications Machine: - Working area X x Y without repositioning: 2585 x 1650 mm - Punching mode: 3085 x 1740 mm - Laser operation: 3085 x 1650 mm - Max. Punching diameter single stroke: 76.2 mm on all tool stations - Max. Punching diameter standard MultiCut: 200 mm - Max. Edge height: 25 mm - Programmable part chutes: 2 - Max. Part size: 500 x 500 mm Outputs: - Max. Sheet thickness: 8 mm - Max. Punching force (incl. 20 kN hold-down device): 220 kN - Active hold-down device (programmable in stages): 4.5 - 20 kN - Max. Workpiece weight: 230 kg - Max. Passage height in punching mode: 35 mm - Max. Passage height in laser mode: 22 mm Speeds: - X-axis: 90 m/min - Y-axis: 60 m/min - Simultaneous: 108 m/min - Punching stroke sequence: 900 /min - Stroke sequence marking: 2800 /min - C-axis punching: 60 rpm - C-axis thread forming: 330 rpm Tools: - Tool positions on the linear magazine: 18 with 3 clamps - Number of tools when using MultiTool: 18 - 180 tools - Rotation of all tools: 360° through-rotation - Tool change time: 1.5 - 5 s Accuracy: - Position deviation: ± 0.1 mm - Average position spread: ± 0.03 mm Drives: Bwslragovhdcyei Tol - X-/Y-/C-axis: digital three-phase servo motors (maintenance-free) - Punching head: electro-hydraulic drive - Trumpf CNC control: Basis: Siemens SINUMERIK 840D TruFlow 2700 laser: - Laser power: 140 - 2700 W - Beam mode: TEM00 - Max. Sheet thickness mild steel (RSt 37-2): 8 mm - Max. Sheet thickness stainless steel (1.4301 N2): 6 mm - Max. Max. sheet thickness aluminum alloys (N2): 4 mm Total system: - Electrical connection: 73 kVA - Pneumatic connection pressure: 7 bar - Max. Pressure consumption: 65 Nm³/h - Short-term max. compressed air consumption of the SheetMaster at 3 discharges/min: 50 Nm³/h Dimensions and weights: - Space requirement WxL: 7900 x 9100 mm - Height: 2400 mm - Weight: approx. 22500 kg

Condition: ready for operation (used), operating hours: 34,006 h, Functionality: fully functional, laser power: 6,000 W, workpiece weight (max.): 1,800 kg, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, Major maintenance in August 2024 Overhaul of the resonator in 2020 Including LiftMaster TECHNICAL DETAILS Control system: Siemens Sinumerik 840D Travel X x Y x Z: 4,000 x 2,000 x 115 mm Workpiece weight: 1,800 kg Bwslovc U Ucsragi Tol Laser type: Trumpf TLF 6000 Power: 6000 kW Wavelength: 10.6 µm Beam mode: TEM01 Sheet thickness steel: 25 mm Sheet thickness stainless steel: 25 mm Sheet thickness aluminum: 15 mm Axis speed parallel / simultaneous: 200 / 300 m/min Axis acceleration: 16 m/s² Programmable path dimension: min. 0.001 mm Position deviation: 0.05 mm average position spread: 0.03 mm Laser consumption values CO2: 1 l/min N2: 6 l/min He: 13 l/min MACHINE DETAILS Length: 13,000 mm Width: 5,400 mm Height: 2,400 mm Weight: 14.0 tons Rated power: 37 - 76 kw Laser switch-on time: 34,006 h Machine switch-on time: 71,198 h

Condition: ready for operation (used), Year of construction: 2006, operating hours: 36,026 h, Functionality: fully functional, machine/vehicle number: A0250A0290, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, working range: 4,000 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Laser power: 5,000 W Laser hours: 36,026 h Operating hours: 86,385 h Type: CO₂ laser TruFlow 5000 Aluminum sheet thickness (max.): 12 mm Steel sheet thickness (max.): 25 mm Nitrogen high-pressure cutting (NitroLine): up to 20 mm thickness for stainless steel Working area Cutting area: 4,000 mm x 2,000 mm Switching table: 2 cutting tables Workpiece weight (max.): 1,700 kg MACHINE DETAILS Total weight: 14,500 kg Bjlevrxk Hjragi Tewl Total length: 8,100 mm Total height: 2,400 mm Total width: 3,800 mm Power supply Type of input current: three-phase Input current: 160 A Input voltage: 400 V Input frequency: 50 Hz Power: 109 kW (148.20 HP)

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine Bwelrotltl Heagi Tol 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Year of construction: 2004, Condition: ready for operation (used), A Trumpf CO2 laser cutting system including Liftmaster is available. Laser power: 5kW, travel X/Y/Z: 3000mm/1500mm/115mm, max. workpiece thickness: aluminum: 10mm, mild steel: 20mm, stainless steel: 15mm, positioning speed: 200m/min, simultaneous positioning speed: 300m/min, max. workpiece weight: 700kg. Machine dimensions X/Y/Z: approx. 10500mm/4500mm/2300mm, weight: approx. 11000kg, control: Siemens Sinumerik 840D, operating hours: 110000h. Documentation available. On-site inspection is possible. Bslrajudm Dysgi Tjwl

Condition: good (used), Year of construction: 2011, operating hours: 15,971 h, Functionality: fully functional, laser power: 4,000 W, laser hours: 15,971 h, overall weight: 22,500 kg, sheet thickness (max.): 8 mm, Application by the end of 2024 - submission of bids obliges timely collection. Machine including special equipment and automation TECHNICAL DETAILS Working area: 2500 x 1250 mm Laser: TruFlow 4000 Laser power: 4000 W Punching Max. sheet thickness: 8 mm Max. Workpiece weight: 200 kg Max. Punching diameter: 76.2 mm Liner arm magazine: 22 tool positions with 3 clamping claws Punching force: 220 kN Parts flap: 500 x 500 mm Control system Control type: Rexroth IndraMotion MTX Positioning accuracy: 0.1 mm Operating data Operating hours: 80,968 / 81,053 / 15,971 h MACHINE DETAILS Length: 8070 mm (basic machine) Width: 8550 mm (basic machine) Height: 2730 mm (basic machine) Weight: 22,500 kg (basic machine) EQUIPMENT - Standard - Adjustment device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 good parts containers - Chip container - Transport and assembly device - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Liftable laser cutting support - LensLine - High-frequency excitation - Cooling unit - Laser control TASC 4 - Electro-hydraulic punching head - Tool length compensation - Adjustable hold-down force - Spray lubrication punch - Bulge detection - Level monitoring Thread forming and tool lubrication - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device, UTI with bus connection - ControlLine - USB interface and RJ45 network connection - CE marking - Dual-beam light barriers - Protection against stray radiation - Compact dust extraction system EQUIPMENT - extended - TruFlow 4000 including LensLine - Active die - Spray lubrication die - MultiTool function - Thread forming function - Marking function - Engraving function - Rolling technology function - Adaptive stroke calibration - StripLine - Repositioning cylinder - Vibration-damped installation - Chip conveyor with container - Table extension - Special thin sheet machining - Brush tables - Blow-out device for small parts AUTOMATION SheetMaster 2500 x 1250 mm - Suction cup frame with 36 suction cups (y-axis = 400 mm) - Movable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Suction cup plate module - Vacuum sensor system - Central lubrication - Sheet thickness gauge for double sheet control Bolragiou Rbg Eo Towl - Automatic clamp closing SheetMaster Loading and unloading parallel to production time Peeling system Unloading monitoring GripMaster 2500 x 1250 mm - Residual skeleton grippers with sensors - Residual skeleton pallet can be tilted ToolMaster with 40 stations Main time parallel set-up Trolley systems (2500 x 1250 mm on rails) Loading/unloading double trolley incl. storage interface Including 1 set of set-up cassettes with die plates (21 pieces)

Condition: excellent (used), operating hours: 58,000 h, Functionality: fully functional, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Bjlragisrgaw He Towl Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Year of construction: 1992, Condition: ready for operation (used), Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible. Bjlrevxvfnoagi Tewl

Condition: good (used), Year of construction: 2006, Functionality: fully functional, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: Bjlrjuthz Tjagi Tewl - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Year of construction: 1994, Condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Bwolrageq Ewi Aji Tsl

Condition: excellent (used), Year of construction: 2001, operating hours: 39,500 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: Bsljulqrljragi Towl - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors