Used Valla 120 E for sale (22,807)

Year of construction: 2010, Condition: used, Functionality: unexamined, Vaculift panel lifter for sale. Capacity: 270 kg No power connection required! The vacuum is created by lifting with a crane! Battery-powered monitoring with audible alarm! Dslipiowf U R Usudecg

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 5,040 h, load capacity: 2,500 kg, lifting height: 8,000 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,348 mm, fork length: 1,150 mm, total length: 1,800 mm, drive type: Elektro, construction width: 1,350 mm, net weight: 5,200 kg, Reach Truck Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Front Tires Type: Polyurethane Front Tires Condition: 40 - 60% Rear Tires Type: Polyurethane Rear Tires Condition: 40 - 60% Battery Voltage: 48V Battery Ah: 775Ah Battery Year of Manufacture: 2016 Sideshift, 3rd Valve, Pulse Control, Full Free Lift, Dslipiuewbw U Iodecg

Year of construction: 1991, operating hours: 32,000 h, Condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report Delipowaxuajiudocg • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Condition: excellent (used), 4kw, all stainless steel construction with built in inverter. Dcjlipjwdx Hdjiudeg

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Djlipiuegu Rzisdjcg Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW

Condition: good (used), Functionality: fully functional, fuel type: diesel, operation weight: 12,000 kg, Year of construction: 2019, operating hours: 1,000 h, Prodajem drobilicu Terex Bison 120 Radnih sati≈1000 Godina 2019 Doljvrfqaoipiudjcg Upravljanje putem daljinskog Magnetna traka Zvati na broj

Year of construction: 2019, Condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Measurements height 2858 mm Machine weight 4400 kg Main Drive Number of axis 4 Movement X-Axis Movement 600 mm X-Axis Accuracy 0.001 mm Y-Axis Movement 400 mm Y-Axis Accuracy 0.001 mm Z-Axis Movement 400 mm Z-Axis Accuracy 0.001 mm Workpiece Workpiece weight 1000 kg Additional Equipment Delipiuowdbatsdscg Linear tool changer (LTC): 6 positions This 4-axis AgieCharmilles Form E 600 die-sinking EDM machine was manufactured in 2019. It offers precision and efficiency for complex mold manufacturing. Consider the opportunity to buy this AgieCharmilles Form E 600 die-sinking EDM machine. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2019, load capacity: 2,000 kg, fuel type: electric, Visual condition: normal, Technical condition: normal Dslipiujwgui Tsdecg

Condition: new, -Dimension: 1422X991X1067mm -Temperature:121 to 302°C -Width of the mat:45.7cm -Length of the mat:1.422m -Baking time:1-30 minutes 4.3'' color screen with 8 preset recipes. -Stackable up to 3 ovens -On a rack with castors Dcolipiuou Stwlsdjg -Voltage:230V -Power:12kw -Accessories -Top part for column panel,68,00 -Pillar panel bas Ref: 1524 68.00 -Stand for oven Ref: 1120-1 687.00 -Stainless steel finish, top, front and sides. -Digital operation -With a door on the front for adding products. -The front is completely removable for quick and effective cleaning. -The running direction of the belt is reversible.

Year of construction: 2025, Condition: new, Functionality: fully functional, Cream Cooker CK 120 Efficient cooking and heating of creams and mixtures Precise temperature control Digital timer, 2 speeds Vessel capacity 120 liters Capacity 12 to 78 liters Stainless steel construction, thermal oil With handwheel for emptying Dcolipijv H Ti Toudjg Mobile machine with brake DGUV V3 tested Connection 400V, 17 kW, 32A, 32A-CEE plug Dimensions 1120 x 905 x 1830 mm, W x D x H Weight 240 kg NEW machine 12-month warranty + spare parts service Options: Leasing & Rental Service Touch Panel LCD Powerful heating Maintenance contract Service package Instruction & commissioning Visit our large bakery machinery exhibition!

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 8,927 h, load capacity: 2,500 kg, lifting height: 4,680 mm, free lift: 1,394 mm, fuel type: electric, mast type: triplex, construction height: 2,174 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Double Pedal Condition: Reconditioned without warranty Technical Condition: Good Front Tire Type: Non-Marking Front Tire Size: 23x9-10 Front Tire Condition: 60 - 80% Rear Tire Type: Non-Marking Rear Tire Size: 200-50-10 Rear Tire Condition: 60 - 80% Battery Voltage: 80V Battery Ah: 625Ah Battery Manufacturer: Hawker Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Description: Delivered with a new FEM 4.004 inspection including inspection book. Please call us for any further questions. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable conditions. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date of listing. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Dcslipewgf Rhsiudjg Durwen fork clamp with valve block sideshift 3rd valve, 4th valve, rear work light, front work light, full free lift, safety light, LED,

Condition: new, Year of construction: 2024, Mobile panel transport trolley - Stacking of panel heights up to 1600 mm, electrically operated - Tilt angle forwards/backwards 100°, electrically operated - Rotation angle of the head joint clockwise/counterclockwise 180° - Rotation angle of the head joint: 360 - Load capacity 120 kg - Panel sizes up to 2100 x 3200 mm - Total height 2090 mm - with 6 powerful suction pads, which can be adjusted in width Dolekwhkrjipiudecg The Mobilifter ML-120 consists of - a mobile base frame - an electric lifting and tilting system - an automatic vacuum unit - a rivetless, electric control unit - Weight 170 kg Availability: short term Location:Hochheim

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Interface for brush control Dolipiov R Ia Isudjcg Interface for handling device (EUROMAP 67)

Condition: good (used), mileage: 58,664 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,640 mm, first registration: 03/2021, loading space length: 3,250 mm, loading space width: 1,760 mm, loading space height: 1,840 mm, color: white, driver cabin: day cab, suspension: other, tire size: 235/65R16, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, = Additional Options and Accessories = Dcoliewfwzijpiudog - Electric Windows - Electric Mirrors - None - Partition - Central Locking = Remarks = Configuration: 4x2, Payload: 1098 kg, Unladen Weight: 2402 kg, Gross Weight: 3500 kg, Cabin Type: Single Cab, Cruise Control, Air Conditioning, Number of Airbags: 2, Parking Assistance: Front and Rear, Electric Windows, Electric Mirrors, Partition, Radio/Cassette, GPS Navigation, Color: White, Heated Mirrors, Rear View Camera, Lighting Type: LED Lamp, Speed Limiter, Lane Keeping Assist, Climate Control, Heated Seats, Bluetooth, Engine Power: 100 kW (134 Hp), Fuel: Electric, Transmission Type: Automatic, Speed Limiter, Power Steering, ABS, ASR, Starter Battery, Rear Step, Roof Rack: None, Side Doors: 1, Rear Locking: Double Door, Central Locking, Seats: 3, Seat Cover: Fabric, Seat adjustment: Manual, E-Crafter electric AC camera LED CarPlay, Tire type: Summer tires = Further information = General information Number of doors: 1 License plate: VRT-60-X Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Axle 1: Tire profile left: 1 mm; Tire profile right: 1 mm; Suspension: Coil springs Axle 2: Tire profile left: 6 mm; Tire profile right: 5 mm; Suspension: Leaf spring Dimensions Dimensions (L x W x H): 610 x 200 x 265 cm Weight Curb weight: 2,402 kg Payload: 1,098 kg GVW: 3,500 kg Functional Loading area height: 80 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 11 kW (14.96 HP), Equipment: documentation/manual, 3 Teka Pusch Pull fume extraction units for sale. The three units are sold together. Price 14400Eur, net. The units are equipped with Easy-Cleain-Plus filter cartridges. They were used in a welding plant with an area of 800 sq m from 2017 to 2020. Due to a change of activity, the 3 units are for sale together with the installed network. The units can be viewed after consultation in operational condition. The Push Pull system is excellent for cleaning the air in halls where local extraction is not sufficient for some reason or has a negative impact on productivity. The suction openings are placed at a height of approx. 5-6 meters, and the cleaned air is returned to the opposite side of the hall. The system collects and filters harmful substances on the suction branch, and the cleaned air is returned to the space on the pressure branch. It is possible to inhale fresh air on the suction line. Filter equipment: TEKA FILTERCUBE 4H – 11 kW (3DB) Fixed installation extractor and cartridge separator with automatic filter cleaning. The used “Easy Clean+ ” cartridges are provided with a protective layer (“precoat”) during production, which ensures surface filtration, thus high (>99%) filtration efficiency (BIA M filter class) and a long service life. Automatic pulse cleaning is ensured by built-in membrane valves and the microprocessor “Pulse Control” control, which is easy to operate and programmable according to the current requirements. Dirt accumulated on the surface of the filters leads to an increase in the pressure difference (constantly monitored before and after the filters). The control starts the pulse cleaning when the preset value is reached. The dirt thrown off by each pulse falls into the dust container, which must be emptied periodically. The cleaning pulses can be activated either by timing or manually. The text display shows the current operating status (pressure drop, operating hours, date, etc.). Technical data FC 4H 11kW: Pre-filter: perforated baffle Filter area [m²]: 100 (4 cartridges 25m²) Filter cartridge: BIA M Control: Pulse-Control Current consumption [A]: 0.3 Fan capacity [m³/h]: 8,000 (at operating point) Pressure [Pa]: 2,500 (at operating point) Motor power [kW]: 11 Power supply [V/Hz]: 400/50 Current consumption [A]: 22.5 Motor control: Star-Delta connection Noise level [dB(A)]: approx. 78 Intake port: Ø400mm on the left Exhaust port: Ø450mm on the right Dimensions (WxDxH) [mm]: Approx. 800 x 800 x 2920 Floor area of the Filtercube 4H extraction units: 800x800mm)  Each device is IFA (BGIA) certified in accordance with DIN EN ISO 15012-1. The biggest advantage of the Push Pull system is that it works unnoticed, without the need for workers, thus having a positive effect on productivity. The filter cartridges are cleaned using the microprocessor CONTROL UNIT2 control and the special POWER-SPRÜH system. Dcslipist A Uiioudjg CONTROL UNIT2 filter control The microprocessor CONTROL UNIT2 filter control can be monitored via a plain text display. This control monitors all operations of the extraction and filtration unit. It determines the amount of compressed air required for cleaning, based on this the air volume can be adjusted and the control can be changed manually or even depending on the pressure difference and time. There is also a possibility to remotely indicate the filter status. The control is connected to the operating hour counter and a clock.

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Delipiujcdy Ndodscg Location: From stock Bitburg

Condition: new, Year of construction: 2024, Rotary vane vacuum pump in oil bath. Available in stock. Pump completely new. With 12 months warranty Nominal flow: 40 m3 / h at 50Hz. Final vacuum: 0.5 mbar abs. Delieftzqdjpiudecg Any clarification, do not hesitate to contact us.

Condition: used, Used machine Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Dcslipioq Hh Ebjudsg Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: used, mileage: 185,040 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,690 mm, overall weight: 7,490 kg, empty load weight: 4,940 kg, maximum load weight: 2,450 kg, first registration: 10/2012, loading space length: 5,450 mm, loading space width: 2,437 mm, loading space height: 2,097 mm, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 2, Year of construction: 2012, total length: 7,450 mm, construction height: 3,310 mm, fuel: diesel, Equipment: ABS, onboard computer, tail-lift, The used Iveco EuroCargo ML 75 E 16 P is a versatile box-type van with an interior length of 5.5 meters. The vehicle was first registered in October 2012 and has a mileage of 185,040 kilometers. It is powered by a 118 kW (160 hp) diesel engine and is equipped with an automatic transmission. The Euro 5 engine offers a Stage 4 (Green) environmental sticker. The vehicle's dimensions are 7,450 mm long, 3,310 mm high, and 2,300 mm wide, with a wheelbase of 3,690 mm. The Iveco EuroCargo has a gross vehicle weight capacity of 7,490 kg and is painted in a striking yellow color. The truck is ideal for commercial use and has only been used by one previous owner. Dcslipotux Efoiudsg This vehicle is a great option for agricultural companies, freelancers, or small to large businesses that require a solid and reliable van. Optional services such as various loading options and nationwide delivery are also available for an additional charge. Viewings are possible Monday through Saturday without prior notice. Sale only to businesses (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Delipiohkztwsudocg Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm Dslipiotq Nlreudscg 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: used, mileage: 27,180 km, power: 130 kW (176.75 HP), first registration: 03/1994, overall weight: 9,500 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 2,490 kg, empty load weight: 7,010 kg, fuel: diesel, wheelbase: 3,700 mm, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, Year of construction: 1994, operating hours: 154 h, total length: 7,000 mm, number of seats: 9, construction height: 3,100 mm, Equipment: all wheel drive, differential lock, trailer coupling, The Iveco FF 95 E 18W LF 8/6 is a used fire engine with extensive features, ideal for use in demanding environments. This special vehicle has a robust 4x4 drive and a 5.9-liter diesel engine with an output of 130 kW (177 hp). The machine is equipped with a 6-speed manual gearbox and offers space for up to nine people, making it perfect for emergency teams. The equipment includes a rear pump FP8/8 and a fire water tank with a capacity of 600 liters. The vehicle's operating hours are only 154 hours and the mileage is 27,180 km. The vehicle dimensions are 7,000 mm in length, 3,100 mm in height and 2,500 mm in width, with a wheelbase of 3,700 mm. The permissible total weight of the vehicle is 9,500 kg. The vehicle was built in 1994, it was looked after by a previous owner and has the red paintwork typical of fire engines. Air dryer. Additional heating. Rear pump FP8/8. Fire water tank 600L. 154 operating hours. Dcslor Uzfqsipiudsg Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 2009, Used dust extractor Year of manufacture: 2009 Condition: minor external damage, fully functional Nominal flow rate: 1120 m³/h Min. flow rate: 814 m³/h Extraction nozzle: 120 mm 2050 Pa Filter area: 4.3 m² Motor: 2.2 kW, 400 V Dslovu Idujipiudecg HxWxD: 1985 x 1085 x 650 mm Weight: approx. 99 kg Availability: Short-term Storage location: Flörsheim

Condition: used, mileage: 506,097 km, power: 206 kW (280.08 HP), first registration: 10/2014, overall weight: 11,990 kg, fuel type: diesel, color: yellow, maximum load weight: 4,030 kg, empty load weight: 6,960 kg, fuel: diesel, wheelbase: 4,815 mm, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, loading space width: 2,400 mm, loading space length: 7,050 mm, loading space height: 2,100 mm, Year of construction: 2014, total length: 8,900 mm, number of seats: 3, construction height: 3,350 mm, Equipment: tail-lift, trailer coupling, Clutch damage. The used Iveco EuroCargo ML 120 E28/P offers a reliable choice for furniture and freight transport needs. This truck was first registered on October 23, 2014, and has a mileage of 506,097 km. Equipped with a 6,728 cc diesel engine producing 206 kW (280 hp) and an automatic transmission, the vehicle complies with the Euro 6 standard and is equipped with a green environmental sticker. Dcolipiuotp N U Tedeg The vehicle's box body measures 7.00 x 2.44 x 1.98 meters, providing ample space for transporting goods. The truck has a yellow metallic paint finish and is approved for a maximum gross vehicle weight of 11,990 kg. The wheelbase is 4,815 mm, ensuring stable and safe maneuverability. With two doors and three seats, the vehicle offers a practical interior layout for professional use. The Iveco EuroCargo was used by one previous owner and is still in good condition. Viewings are possible without prior appointment during the stated business hours. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, Year of construction: 2001, Used machine Year of manufacture 2001 Grinding width 1100 mm Grinding belt length 1900 mm Workpiece thickness 3-150 mm Infinitely variable feed speeds 2.5-13 m/min. 1 steel contact roller 1 rubber-coated contact roller 1 sanding pad unit with air cushion sanding pad Drives: 1st sanding unit 15 kW 2nd sanding unit 15 kW 3rd sanding unit 11 kW with table extension at the inlet with table extension at the outlet Total connected load 43 kW Weight 3100 kg Extraction capacity approx. 6750 m³/h Dcjlswb Egxjipiudeg Air speed 20 m/s Compressed air connection 6-8 bar Air consumption approx. 30 l/min. L x W x H 1750 x 2740 x 1890 mm