Used Master Bv170E for sale (2,127)

Condition: like new (used), Functionality: fully functional, Delayed Proofing Cabinet Debag Tefi 400B for max. 20 baking trays 600 x 400 mm fully assembled, standard unit, mounted on top Max. temperature from -10° to +40°C Humidity up to 90% for optimal dough handling Computer control Colimsryr A To I Nbjrb Interior and exterior walls made of stainless steel 230V connection, 1.2 kW, plug-in ready DGUV V3 tested Dimensions: 792 x 715 x 2120 mm, W x D x H Used unit / demonstration unit 6-month warranty + spare parts service Option: Maintenance contract Leasing & rental service Service package Instruction & commissioning with a master baker Other proofers / proof interrupters in stock!

Condition: good (used), Year of construction: 2014, operating hours: 54,816 h, Functionality: fully functional, Year of manufacture 2014 3D control Heidenhain TNC 530 Tool holder HSK-A-63 Chain magazine with 60 tool positions NC swivel rotary table / C-axis table top d 650 Travel paths 750 mm x 650 mm x 560 mm Production package / 600 liters / internal cooling 40 bar / 23 l/min Rotating viewing window Flushing gun with pump Oil and emulsion separation system Crelimswhltxe I Nbsb Infrared measuring probe / Heidenhain TS 649 Tool measurement in the work area (Blum Laser) Oil and emulsion separation system Infrared measuring probe / Heidenhain TS 649 3D quickSET expansion package Four-color signal light Operating mode 4 Motor spindle speedMASTER 18,000 rpm Spindle hours 24,449 Tool measurement in the Work area (Blum Laser)

Condition: used, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (length / width) 3065x1600x1900 mm weight of the machine ca. 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine ----- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, Crjlevnv Tweim I Nbob surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) -----...

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 15,452 h, load capacity: 3,000 kg, lifting height: 4,510 mm, free lift: 650 mm, fuel type: diesel, mast type: standard, construction height: 3,100 mm, fork carriage width: 1,300 mm, fork length: 1,370 mm, total length: 4,500 mm, engine type: VM, drive type: Diesel, construction width: 2,150 mm, net weight: 6,860 kg, Sideloader Load center of gravity: 700 Fork width: 150 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Crslewgqt Ijim I Nbjb Technical condition: Very good Front tires type: Air Front tires size: 27x10-12 Rear tires Type: Air Rear tires size: 27x10-12 Description: In addition to this Baumann model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DFQ30/14/45ST P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on commission. Heating, full cab, Platform height: 820 mm

Condition: like new (used), Year of construction: 2019, operating hours: 46,212 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC-640 with CELOS, workpiece length (max.): 600 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 800 kg, table load: 1,500 kg, rotary table diameter: 630 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,376 h, number of slots in tool magazine: 180, tool length: 365 mm, tool weight: 8 g, Equipment: chip conveyor, CNC control: Heidenhain TNC-640 with CELOS Axes X-axis travel mm: 935 Y-axis travel mm: 850 Z-axis travel mm: 650 C-axis degrees: 360° (0.001) A-axis degrees: +120° to -120° Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in axes m/s2: 6 Work table Number of pallets: 6 Table dimensions mm: 630 Crelim Iswgiphj Nbjb Maximum workpiece size (D x H) mm: 800 x 600 Maximum workpiece weight kg: 800 in APC - 1,500 in workarea T-Slot version: DIN - 55201-A2 Spindle Spindle speed rpm: SpeedMaster 20 - 20. 000 Spindle power kW: 35 / 25 Spindle torque Nm: 130 / 86 (40%/100% DC) Tool system Tool holder: HSK-A63 Tool magazine positions: 180 With free adjacent positions mm: 200 With occupied adjacent positions mm: 80 Max. tool length mm: 365 Max. tool length mm: 365 of tool mm: 365 Max. tool weight kg: 8 Equipment Electronic handwheel Chip extractor Internal coolant lubricant supply Flushing gun Operating mode 4 Mist collector 3D quickSET Precision package Air blowing through spindle center, selectable via M function MPC - Machine Protection Control Temperature compensation Paper belt filter RENISHAW OMP60 CE Blum laser tool measurement Production package Rotating viewing window with laminated glass Round pallet Stor 10 - 80 Tank capacity liters: 980 L Machine operating times Under voltage: 46. 212 Operating Time: 10.376 Rated power kVA: 78 Basic machine dimensions / weight Length mm: 5.063 Width mm: 5.093 Height mm: 3.153 Weight kg: 12.300

Year of construction: 2013, Condition: ready for operation (used), Control Unit Crjlim Iewg Igxe Nbob Brand TRUMPF Additional Equipment Nozzle Changer: 1 Cross Conveyor Belt: 1 Wide cross conveyor belt with tipping container (right) LiftMaster Package: Basic unit, Loading station, Peeling device, Sheet thickness gauge, Unloading platform, Extension rake attachment, Interchangeable tines, Symmetrical installation (loading on the right), Third position (without unloading platform) Unloading: 1 scraper arm, precise unloading position (max. s = 15 mm) This 3-axis TRUMPF TruLaser 3030 was manufactured in 2013, offering precise fiber laser cutting capabilities. Ideal for detailed and efficient metal processing, this machine represents a valuable asset for enhancing your production line. Consider the opportunity to buy this TRUMPF TruLaser 3030 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2019, Condition: used, Functionality: fully functional, machine/vehicle number: E11MI1922727887, This is a CM 101 combi steamer from the premium manufacturer Rational, in an electric version. This combi steamer is equipped with a hanging rack with 8 shelves, allowing you to use deeper containers for larger quantities per shelf. This combi steamer was primarily used for heating food and is therefore in good, used condition. The appliance has undergone a thorough inspection in our in-house workshop and is fully functional. The base frame shown is not included in the offer but can be purchased separately. You will receive an invoice with VAT. The price is gross and includes 19% VAT. Service: We would be happy to connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We are happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. This appliance is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used appliance service for you: 6-month warranty on all electrical parts High-quality brand-name appliances at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or pickup options Expert advice - before and after purchase Provision of operating instructions, wiring diagrams, and spare parts Tested according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its features, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow, and cooking time. Technical specifications: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport: W x H: 845 x 1050 mm Power supply: 400 V / kW: 18.6 / 50-60 Hz Capacity: 8 x 1/1 GN Weight: approx. 132 kg Crelijwgkwaom I Nbjb Serial number: E11MI19022727887 Year of manufacture: 2019 Condition: Used, serviced, fully functional Further information: Applications: Steam mode: from 30°C to 130°C Convection mode: from 30°C to 300°C Combination mode: from 30°C to 300°C Finish®: Bring perfectly prepared and chilled food to serving temperature in the optimal climate Automatic grease separation for clean cooking chamber air Manual Cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Rear-ventilated double glazing (pivoting for easier cleaning) LED cooking chamber illumination Core temperature measurement via sensor Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Hand shower with automatic retraction Dynamic air circulation Shipping: Delivery or pickup by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement.

Condition: used, Year of construction: 2014, operating hours: 23,048 h, Functionality: fully functional, machine/vehicle number: 2600-102594, overall weight: 272 kg, load capacity: 20 kg, arm reach: 1,650 mm, This is an ABB IRB 2600-20/1.65 industrial robot Year of manufacture2014 We are also happy to offer you this robot refurbished! The robot includes the following options: RW Control module key RobotWare OS and English 644-2 German 709-x DeviceNet 709-1 Master/Slave Single Celimjtk R Dco I Nbjrb 711-1 PROFIBUS DP m/s 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 614-1 FTP and NFS client 623-1 Multitasking

Condition: used, Year of construction: 2019, Functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Cslim I Nowgd Hzobjrb Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: used, Functionality: fully functional, Year of construction: 2011, operating hours: 4,397 h, load capacity: 3,000 kg, lifting height: 5,020 mm, free lift: 580 mm, fuel type: electric, mast type: standard, construction height: 3,260 mm, fork carriage width: 3,650 mm, fork length: 1,200 mm, total length: 2,850 mm, drive type: Elektro, construction width: 2,350 mm, net weight: 8,322 kg, Four-way side loader Load centre of gravity: 600 Celim I Njwgqtuebjrb Fork width: 150 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 48V Battery Ah: 930Ah Battery year of manufacture: 2018 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this EFYco 30/14.5-12/50ST P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to display your vehicle for commission sale. Fork adjustment device,

Condition: reconditioned (used), operating hours: 1,320 h, Functionality: fully functional, working width: 130 mm, area performance: 8,000 m²/h, overall weight: 1,430 kg, tank capacity: 265 l, total width: 145 mm, total length: 1,870 mm, water tank capacity: 265 l, operating speed: 9 mm/s, battery voltage: 36 V, sweeping width: 130 mm, Offered is a repaired Nilfisk BR 1300 S ecoflex ride-on scrubber dryer with 1320 operating hours recorded. The machine comes from the first owner and has always been serviced by Nilfisk. The customer opted for our autonomous cleaning robots TN70W and our compact sweeping robot DR SW90. We exchanged the Nilfisk, which is currently being overhauled and professionally repaired in our workshop. Crjlievu Sl Ajm I Nbjb This BR 1300S has a scrubbing width of 130 cm and a suction width of 145 cm, the tanks each have 265 liters. The built-in ecoflex dosing system ensures a set dosage with the respective cleaning agent. The 36 V PzS480 trough battery was replaced with new battery cells in 7/2024. We have more than 25 years of experience with heavy cleaning machines worldwide and used machines are converted for long-term use. Machine is cleaned, scrub deck dismantled, motors checked, deck is sandblasted, powder coating base color and baked enamel (we do everything ourselves in our workshop), new brushes, panels are blasted, primed, powder coated, new suction lips, new scraper rubbers. Warning light and safety lighting is installed. Currently, various ride-on scrubber dryers Hako Scrubmaster B 310 R / Power Boss Admiral in various versions are being rebuilt in our workshop and equipped with new LITHIUM TECHNOLOGY. Visit us at our company in Belgium or contact us by email or phone Shipping worldwide. In Germany, our company is in Geilenkirchen. Our base in Mannheim is also our German workshop, exhibition for our cleaning robots. Not every customer or every building can work with cobot robots, but they want to have a well-maintained building and clean it cheaply. For us, used is sustainability, well thought-out solutions and affordable machines that will do their job for many years to come. Clients in the United States will be assisted by our USA Representative in Wichita, KS with Logistical Hub in Savannah, Georgia.

Condition: used, _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system Creliowf Ti Aom I Nbeb :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: good (used), Year of construction: 1995, WITHOUT SHEETMASTER Sheet width: 2500 mm Sheet length: 1250 mm Sheet thickness: 8 mm Crolisvq N A Rem I Nbob Punching force: 220 kN Operating hours: 51,658 h Machine weight: approx. 11,050 kg Equipment/Accessories: - TRUMPF Sheetmaster

Condition: used, Year of construction: 2014, operating hours: 23,340 h, Functionality: fully functional, machine/vehicle number: 2600-102584, overall weight: 272 kg, load capacity: 20 kg, arm reach: 1,650 mm, This is an ABB IRB 2600-20/1.65 industrial robot Year of manufacture 2014 We are also happy to offer you this robot refurbished! The robot includes the following options: RW Control module key RobotWare OS and English 644-2 German 709-x DeviceNet 709-1 Master/Slave Single 711-1 PROFIBUS DP m/s Crolistk Rklom I Nbob 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 614-1 FTP and NFS client 623-1 Multitasking

Condition: used, Functionality: fully functional, Year of construction: 2012, operating hours: 8,320 h, load capacity: 7,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: standard, construction height: 2,700 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, total length: 3,230 mm, drive type: Elektro, construction width: 1,520 mm, net weight: 10,430 kg, Compact forklift - electric Load center: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: standard Condition: ready for use and fully functional Cjlim Iewgqq He Nbsrb Technical condition: very good Front tires type: super elastic Front tires size: 355/65-15 non-marking Rear tires type: super elastic Rear tires size: 28x9-15 non-marking Battery voltage: 80V Battery Ah: 980Ah Battery year of manufacture: 2020 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this ECF70-6C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Battery: 80 V 980 Ah, Year of manufacture: 2020

Condition: used, Year of construction: 2016, x-path max. 6500 mm y-path max. 200 mm z-path max. 150 mm Workpiece weight 130 kg Connected load 17.5 kW Wall thickness 8 mm Stainless steel tube 4 mm Material weight max. 20 kg/m Machine weight approx. 18000 kg Laser tube cutting machine Crjlimot Agh Rs I Nbjb Standard equipment: Machine: - Machine bed for automatic loading up to 6.5 m - Enveloping circle diameter round tube up to 152 mm, rectangular tube enveloping circle 170 mm - Discharge station 3 m (incl. scrap conveyor belt with container) - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic switch-off - Work area lighting Laser: - TruFlow 2000 CO2 laser - Laser logbook function - Laser cooling unit Cutting head: - Lens cutting head with 155 mm focal length - ControlLine Control system: - Sinumerik 840D SL - Teleservice via Internet Data transmission: - RJ 45 network connection, USB connection, Wireless Operation Point Safety: - CE marking - Multi-line light barriers - Extraction and compact dust extractor - Protective cabin with Makrolon windows Accessories: - Clamping jaw set D20-85mm, 85-152mm - Molding shells - Belt table extension for ejection station 3.0 m - Finished part length +1.5 m (to 4.5 m) - SeamLine tube with internal detection - Low-scratch design - Compressed air cutting TruLaser Tube automation: - LoadMaster Tube 6.5 m with bundle trough Working hours: Laser On 12000 Beam On 3000

Condition: used, Functionality: fully functional, Year of construction: 2005, operating hours: 17,306 h, load capacity: 11,500 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: standard, construction height: 6,880 mm, total length: 5,050 mm, engine type: Volvo, drive type: Diesel, construction width: 3,500 mm, net weight: 27,600 kg, Empty container stacker Load center of gravity: 12000 Mast type: Standard Gearbox: ZF Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Celim I Njwgql Robjrb Front tires size: 12.00-20 Rear tires type: pneumatic Rear tires size: 12.00-20 Description: In addition to this Svetruck model, we have around 200 heavy-duty stackers, compact stackers, forklifts and side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase and financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this 16CS4H P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to display your vehicle for commission sale. Spreader 20 / 40 Heating, full cabin,

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 4,361 h, load capacity: 3,000 kg, lifting height: 3,150 mm, free lift: 950 mm, fuel type: diesel, mast type: triplex, construction height: 1,910 mm, fork carriage width: 1,055 mm, fork length: 1,800 mm, total length: 2,850 mm, engine type: Kubota V2403, drive type: Diesel, construction width: 1,780 mm, net weight: 4,600 kg, All-terrain forklift Load center: 600 Csljvimfysim I Nbsrb Fork width: 100 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Front tires size: 10,5/80-18 Rear tires Type: Air Rear tires size: 10,5/80-18 Description: In addition to this Combilift model, we also have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this COMBI-RT P.S.: Our forklift master workshop is specialized in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, full free lift,

Condition: used, Functionality: fully functional, Year of construction: 2005, operating hours: 22,793 h, load capacity: 6,000 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: standard, construction height: 3,930 mm, fork carriage width: 1,800 mm, fork length: 1,140 mm, total length: 3,300 mm, drive type: Diesel, construction width: 1,900 mm, net weight: 10,520 kg, Diesel forklift Load centre of gravity: 600 Celswgqhlsim I Nbjrb Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tyres type: super elastic Front tyres size: 355/65-15 Rear tyres type: super elastic Description: In addition to this Linde model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this H60D-03 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to display your vehicle for commission sale. Heating, full cabin,

Condition: used, Functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, mast type: standard, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, total length: 3,550 mm, drive type: Treibgas, construction width: 2,000 mm, net weight: 12,270 kg, LPG forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Cjlim I Newgp Nhoberb Front tires type: super elastic Front tires size: 8.25-15 Rear tires type: super elastic Rear tires size: 8.25-15 Description: In addition to this Jungheinrich model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Power+ 987 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork adjustment device, Heating, full cabin, Rotating driver's seat

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 6,201 h, load capacity: 12,700 kg, lifting height: 3,140 mm, fuel type: diesel, mast type: standard, construction height: 3,200 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, total length: 4,700 mm, drive type: Diesel, construction width: 2,540 mm, net weight: 19,460 kg, Diesel forklift Load centre of gravity: 600 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Colim I Njvw Emxobsrb Technical condition: very good Front tires type: pneumatic Front tires size: 12.00-20 Rear tires type: pneumatic Rear tires size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DCG127-6 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin, Central lubrication system, reversing camera

Condition: used, Functionality: fully functional, Year of construction: 2007, operating hours: 10,339 h, load capacity: 5,000 kg, lifting height: 4,170 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, fork carriage width: 1,750 mm, fork length: 2,000 mm, total length: 3,200 mm, drive type: Diesel, construction width: 1,460 mm, net weight: 7,505 kg, Diesel forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Crolim I Nowf Skrjbsb Front tyres type: Superelastic Front tyres size: 355/50-15 Rear tyres type: Superelastic Rear tyres size: 7.00-12 Description: In addition to this Dantruck model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 8450DG P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin, full free lift,

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 20,687 h, load capacity: 5,000 kg, lifting height: 7,500 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,360 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, total length: 4,400 mm, drive type: Elektro, construction width: 2,220 mm, net weight: 8,950 kg, Electric side loader Load centre of gravity: 700 Crelewd U A Ijim I Nbsb Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 355/45-15 Rear tires type: pneumatic Rear tires size: 355/45-15 Battery voltage: 80V Battery Ah: 930Ah Battery year of manufacture: 2013 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JEQn50/14/75TV P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Heating, full cabin, full free lift, Platform height: 850 mm

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 4,169 h, load capacity: 7,000 kg, lifting height: 8,000 mm, free lift: 2,630 mm, fuel type: diesel, mast type: triplex, construction height: 3,640 mm, fork carriage width: 1,760 mm, fork length: 1,370 mm, total length: 5,350 mm, engine type: Perkins, drive type: Diesel, construction width: 2,280 mm, net weight: 12,000 kg, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic Rear tires size: 355/65-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DQ70-14-80T P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Coljwd U Azsim I Nbjrb Fork positioner, Heating, full cabin, full free lift, Camera Platform height: 1,020 mm

Condition: used, Functionality: fully functional, Year of construction: 2008, operating hours: 12,894 h, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: standard, construction height: 3,200 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, total length: 5,050 mm, engine type: PERKINS, drive type: Diesel, construction width: 2,250 mm, net weight: 10,850 kg, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Front tires size: 355/65-15 Rear tires Type: Air Rear tires Size: 355/65-15 Description: In addition to this jumbo model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DFQ70/14/45ST P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Crelim Iewd Uw So Nbsb Fork positioner, 1 NIVO fork Heating, full cab, Platform height: 1070 mm