Used All-Kor Akt 1000 for sale (62,738)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Duobehyumgsvblb Ret Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: refurbished (used), Year of construction: 1990, Karstens K11 1000 full equipment The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is inspected and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Center width: 1000 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm Dobvbjh Riwdolb Rout workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Digital displays for grinding spindle B axis ,workpiece spindle, X, Z axis from HEIDENHAIN Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Duebvsvuubgjblb Ret Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 12,000 rpm, coolant supply: 20 bar, 3-Axis Machining Center Manufacturer: Hardinge Bridgeport Type: VMC-1000 XP3 Year of Manufacture: August 2006 Control: Heidenhain iTNC 530 Spindle Hours: n/a Dusbvswc Eufoblb Rot Technical Specifications: - X-Y-Z Travels: 1,020 x 610 x 610 mm - Spindle: 12,000 rpm / SK-40 - 30-Position Tool Changer - 20-bar Coolant System with Grundfos Pump - 3D Hexagonal Workpiece Probe - IFM Oil Mist Extraction - Paper Belt Filter - Chip Conveyor - Machine Manuals

Year of construction: 1992, Condition: good (used), Industry - Fan / Blower Manufacturer: DSD Air Technology Division (today: Ferrostaal Air Technology GmbH) Type: DRMU 1000 R Year of manufacture: 1992 Volume flow: 35.000 m³/h Dobogu Nyiovblb Rout Pressure: 6.500 Pa Speed min.: 2,035 rpm max. speed: 2.160 rpm Power: 75 kW Air density: 1.1222kg/m³ Temperature max.: 90 °C new price: approx. 35.000,00 € / piece In very good condition!

Condition: excellent (used), color: black, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 309 h, General information Field of application: Construction Drivetrain Drive: Wheel Dobvblbewb Htae Reut Make of engine: Böcker Weights Empty weight: 3.420 kg Functional Lifting capacity: 2.400 kg Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Delivery terms: EXW Latest inspection: 2024-09-02 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 36e Electric Crane 230V construction year 09-2023 with only 309 hours from the first owner. Machine is like new and has among other things: hydraulic wheel drive operable from the remote, hydraulic support legs operable also from the remote, hydraulic jib and radio remote control. Purchase invoice available, the chassis and the crane are both in the same color. Changes and typographical errors reserved.

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 Dobegrzh Eevblb Rjut year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Duobvbeiv Au Eolb Rst Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. spindle. New infeed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Duebvblbsu Ekbhj Rst Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 3 - 120 mm no. of strokes - 95 /min distance table/ram, stroke up 500 mm table surface area 1100 x 700 mm Hole in the table 220 x 100 mm table height over floor 800 mm side window 400 mm ram surface 750 x350 mm ram adjustment 100 mm Oil volume 1300 l power requirement 42,0 kW weight 10,0 t dimensions (WxDxH) 1,8 x 1,8 x 3,55 m permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed Dujbsvut Tzjvblb Ret no foundation pit necessary Option additionally: decoiler Fecker (price on request) can be offered with or without putting into operation - video at seller's site before dismantling available

Condition: used, tank capacity: 1,000 l, empty load weight: 128 kg, temperature: 130 °C, total height: 1,850 mm, total width: 1,000 mm, Year of construction: 2014, Transport container made of stainless steel (stackable) with a capacity of 1000 liters (food-safe) Djbvju Ni Ubsblb Rsut Forward-pulled outlet with disc valve

Year of construction: 1980, Condition: reconditioned (used), Universal - swivel - tilting table for MAHO MH 1000 clamping surface: 1050 mm x 630 mm Dobvbjfx Aipolb Rsut The universal - swivel - tilting table is in a good condition !

Condition: like new (used), Year of construction: 2006, operating hours: 50,332 h, Functionality: fully functional, machine/vehicle number: 200943, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 97 g, Manufacturer: Arburg Type: 420C 1000-290 Year of manufacture: 2006 Machine No. 200943 Control system: Selogica Operating hours: 50,332 h Clamping unit Clamping force: 1000 kN/100 t Tie bar spacing: 420 x 420 mm Mold clamping platens: 570 x 570 mm Ejector travel: 175 mm max. Opening travel: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Screw diameter: 30 mm Dusbov U T Ncjvblb Rot Injection volume: 106 cc Injection weight: 97 g/PS Injection pressure: 2500 bar Extras Handling interface Hardened screw Weight/Dimensions 4.14 x 1.60 x 2.08 mtr. (L x W x H) Weight: 3650 kg Connected load: 80 A Warranty Warranty until first use Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Dsbvboh Rimmjlb Rout New infeed control digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Year of construction: 1996, Condition: ready for operation (used), Max grinding width 1000mm Single aggregate 15 kW engine electric table lift Debvblbjihaz Ue Reut

Condition: new, Year of construction: 2024, Automatic material feed Miter on both sides Compact design Dusbsh S Nxdsvblb Rst Exact positioning of the material by servo positioning technology Trend-setting electric saw feed with ball screw: Highest cutting performance and quality, yet gentle on the saw blade Unique and patented double miter system: Material is always clamped at right angles Cutting range in mm 90° round 335, flat 500 x 335 45° right round 330, flat 320 x 335 45° left round 305, flat 305 x 335 30° right round 180, flat 170 x 335 Remaining piece length without bundle tension min. Manual: 80 mm Automatic: 300 mm Automatic cutting pressure and feed monitoring Frequency controlled AC drive 15-150 m/min Hydraulic full stroke material clamping Automatic movement of the vices Minimum speed and saw blade monitoring Electric miter swiveling via servo motor Visualized program input with CNC control Material feed via servo-controlled ball screw drive incl. the special accessories Micro spraying device Clamping pressure regulator Set-up elements

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Duobvblbswgpxpo Rot Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand HEIDENHAIN Model ITNC 530 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 20 m/min Table Tslots size 18 mm Number of tslots 20 Table load 700 kg This 3-axis Hartford Pro 1000 vertical machining center was manufactured in 2013. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Hartford Pro 1000 vertical machining center. Contact us for more information. Duobvblbevxbt Re Rjt Application Types Milling

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical Grinding Machine Manufactured by Joh. Schehr, Meuselwitz Type SAXW 1000 Weight 33 tons Center distance 5000 mm Duebjwb Dq Nevblb Ret Grinding length 3.5 meters Concave and convex grinding direction Total length 9.6 meters Width 3 meters Height 2.4 meters 380 volts The machine can be inspected under power at the supplier's factory.

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Dsbjtqf Rzsvblb Rsut Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: used, fuel type: diesel, color: red, mast type: telescopic, Year of construction: 2018, operating hours: 2,049 h, Year of manufacture: 2018 Field of application: Construction Drive: Wheel Empty weight: 3.650 kg CE mark: yes Paus PTK 31. Year: 2018. Hours: 2049. Max weight: 3650 kg. Dusbvbewgdmnelb Rst CE Machine. Axle load: 1: 1750 kg. 2: 1750 kg. Moover. 4 point outriggers. Radio Remote Control. Diesel. Max working height: 31 meter. Max outreach: 24.5 meter. Tyres: 195R14 80%. German Machine! ID NR: 180. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 2006, operating hours: 65,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, Hydraulic core pull 2x Hot Runner 4x Debotqifnsvblb Rjut Air valves

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Debvblbswgpwfo Rjut Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Year of construction: 2002, Condition: good (used), doubledeck screen box: 1.000 x 5.000 mm squared meshes on both screen decks Dobvbslxzkkslb Rsut E-motor 4 kW steel-construction and outlet chutes

Condition: new, Functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift 5T lifting capacity triplex mast 5m lifting height 76kw diesel engine Djbvbouzivvelb Rsut pneumatic tires air-conditioned cabin 1220mm fork length additional bucket included additional 2000mm forks the fork is NEW