Used All-Kor Akt 1000 for sale (63,048)

Condition: used, mileage: 130,934 km, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 3,500 kg, empty load weight: 2,494 kg, color: white, Equipment: ABS, air conditioning, airbag, onboard computer, Special Features Dsbewg A Tmo Em I S Ujcg - 6 Seats - Airbag - Air Conditioning - ABS - Radio - Central Locking with Remote Control - Immobilizer - Electric Windows Construction Rear Tipper: - Body Dimensions: 3.2m x 1.8m Renault Maxity with tipper body. Thanks to its overall length of 5.95m, it's perfectly suited for urban use. Furthermore, the lightweight body provides a load capacity of 1000kg! New TÜV (German Technical Inspection) ACR-Juretzki Nutzfahrzeughandels All vehicles offered for sale are the property of ACR Juretzki Nutzfahrzeughandels GmbH. Our vehicles are photographed by us in-house, so you can be assured that these are original photos that reflect the actual condition of the vehicle. After previously restoring used vehicles in our mechanical, body, and paint shop, they are fully prepared for technical inspection. We guarantee the vehicle's original mileage. To avoid this risk, you can have the vehicle inspected remotely by reputable companies such as KÜS, TÜV, or Dekra. We also offer additional services such as: Delivery of the purchased vehicle to your desired destination All export formalities (export registration numbers, etc.) Customized financing offers Leasing offers Purchase of your existing vehicle in the settlement Installation of additional equipment upon request For further information such as technical specifications and detailed photos, please contact us; we will be happy to help. If you have not found a suitable vehicle for your company, please contact us. * All prices listed on our website are net prices. ACR Juretzki Nutzfahrzeughandels GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. However, this information serves only as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the terms and conditions contained in the purchase contract are decisive. Subject to changes, errors, typos, and advance sales.

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Dceb Ejvuk I Aem I S Usg Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, speed adjustable, ram interlocking, two-hand operation stored in partly dismantled condition - as is where is, WITHOUT putting into operation

Condition: excellent (used), Year of construction: 2018, operating hours: 3,000 h, For sale: Ditch Witch At40 All Terrain (2018) Rock system and Jet. System Truck Man Recycle AT-Boretec Tigges (2022). Both in perfect condition ready to drill immediately. Rock master included. Ditch Witch AT40 All Terrain Year: 2018 Hours: 3000h Full rod box Top condition System Truck Man Recycle AT-Boretec Tigges (2022). Male Tgx 26,560 Year: 2016/12 HP: 560 KW: 412 KM: 479,315 km 28,000 kg 3 axles In German registration Very good condition Recycle system truck HS2 AT-Boretec Tigges HDD system truck: Dob Eewgmhbom I S Uscg size 375RB-10,000 no.117-5000 Year: 2022 Hours: 1682h 4 cylinder diesel engine Kubota Bentonit tank 1: 4000l Bentonit tank 2: 4000l Recycling tank 3: 2000l Clean water tank 4: 1000l In perfect condition

Condition: used, Year of construction: 2022, Year of manufacture: 2022 Field of application: Construction Applicable material: Concrete Polaris Ranger 1000 EPS 4x4. Year: 2022. Milage: 9606 km. Automatic. Max weight: 1356 kg. Axle load: 1: 393 kg. 2: 963 kg. Deb Em Iowgwuxj S Ujcg 3 Persons. Closed cabin. Heating. Trailer coupling. Tyres: 1: 27x9.00-12 2: 27x11.00-12. German machine with road registration! ID NR: 385. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data Dceb Em I Sevt Dwbo Usg - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: refurbished (used), Year of construction: 1990, Karstens K11 1000 full equipment The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is inspected and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Center width: 1000 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal Dcjb Emoh Riwdo I S Usg table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Digital displays for grinding spindle B axis ,workpiece spindle, X, Z axis from HEIDENHAIN Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Year of construction: 1999, Condition: used, Field of application: Construction Serial number: T0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 15775 Specifications: - 1999 model - 1000 litres - Weight: 540 kg - For tractor - Works well - Width: Approx. 271 cm Dsb Ejv U Tk Tjm I S Uecg - Ready for delivery Own weight: 540 Width: 271

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² Dcob Emjwc U Nle I S Ujg feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1975, - 3-jaw lathe chuck Ø 400 mm - 4-jaw faceplate Ø 600 mm - Grinding attachment Ø 200 mm - Multifix - Change gears - Operating instructions & documentation - Year of manufacture 1975 Working area: - Center height: 300 mm - Swing over bed: 620 mm - Swing in the gap: 800 mm - Swing over the cross slide: 360 mm - Length of gap: 407 mm - Distance between centers: 1000 mm - Max. workpiece weight between centers (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Internal taper: Metric 90 - Center punch: MK5 Tailstock: - Quill stroke: 180 mm - Quill diameter: 85 mm - Quill inner taper: MK5 Clamping fixtures: - Faceplate diameter: 600 mm - Max. chuck diameter: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feed rates: - Lengthwise feed: 0.086 - 4.866 mm/rev (66) - Cross feed: 0.040 - 2.258 mm/rev (66) - Cross slide travel: 375 mm - Top support travel: 210 mm Thread pitches: - Metric threads: 0.5 - 28 mm (66) - Inch threads: 1 - 56 dpi (66) - Modular threads: 0.25 - 14 mm (66) - Diametrical pitch thread: 2 - 112 dpi (66) Installation: - Motor power: 15 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2950 x 1400 x 1400 mm Deb Eswdxmqom I S Uscg - Weight: approx. 3100 kg

Year of construction: 1992, Condition: good (used), Industry - Fan / Blower Manufacturer: DSD Air Technology Division (today: Ferrostaal Air Technology GmbH) Type: DRMU 1000 R Year of manufacture: 1992 Volume flow: 35.000 m³/h Pressure: 6.500 Pa Speed min.: 2,035 rpm Dob Emogu Nyio I S Uocg max. speed: 2.160 rpm Power: 75 kW Air density: 1.1222kg/m³ Temperature max.: 90 °C new price: approx. 35.000,00 € / piece In very good condition!

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Dsb Em Ishyumge S Uscg Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Djb Eeiv Au Esm I S Ujcg Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. spindle. New infeed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Year of construction: 1996, Condition: ready for operation (used), Max grinding width 1000mm Single aggregate 15 kW engine electric table lift Debsihaz Ue Em I S Uscg

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm Dcsb Em Ievuukus S Ueg closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 12,000 rpm, coolant supply: 20 bar, 3-Axis Machining Center Manufacturer: Hardinge Bridgeport Type: VMC-1000 XP3 Deb Em Iewc Eufs S Uscg Year of Manufacture: August 2006 Control: Heidenhain iTNC 530 Spindle Hours: n/a Technical Specifications: - X-Y-Z Travels: 1,020 x 610 x 610 mm - Spindle: 12,000 rpm / SK-40 - 30-Position Tool Changer - 20-bar Coolant System with Grundfos Pump - 3D Hexagonal Workpiece Probe - IFM Oil Mist Extraction - Paper Belt Filter - Chip Conveyor - Machine Manuals

Condition: used, tank capacity: 1,000 l, empty load weight: 128 kg, temperature: 130 °C, total height: 1,850 mm, total width: 1,000 mm, Year of construction: 2014, Transport container made of stainless steel (stackable) with a capacity of 1000 liters (food-safe) Forward-pulled outlet with disc valve Dcebeu Ni Ubs Em I S Usg

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm Djbogrzh Ej Em I S Uocg ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock Dcob Em Ijh Rimms S Ueg for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. New infeed control digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: excellent (used), color: black, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 309 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Böcker Weights Empty weight: 3.420 kg Functional Lifting capacity: 2.400 kg Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Delivery terms: EXW Latest inspection: 2024-09-02 Production country: DE Additional information Please contact Michael Overmeer for more information Dcebewb Htao Em I S Usg Böcker AHK 36e Electric Crane 230V construction year 09-2023 with only 309 hours from the first owner. Machine is like new and has among other things: hydraulic wheel drive operable from the remote, hydraulic support legs operable also from the remote, hydraulic jib and radio remote control. Purchase invoice available, the chassis and the crane are both in the same color. Changes and typographical errors reserved.

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available Dsb Eevuubgom I S Ujcg

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request. Dcsbou Ekbho Em I S Usg

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Dcjb Emjwgpxpo I S Usg Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: like new (used), Year of construction: 2006, operating hours: 50,332 h, Functionality: fully functional, machine/vehicle number: 200943, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 97 g, Manufacturer: Arburg Type: 420C 1000-290 Year of manufacture: 2006 Machine No. 200943 Control system: Selogica Operating hours: 50,332 h Clamping unit Clamping force: 1000 kN/100 t Tie bar spacing: 420 x 420 mm Mold clamping platens: 570 x 570 mm Ejector travel: 175 mm max. Opening travel: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Screw diameter: 30 mm Injection volume: 106 cc Injection weight: 97 g/PS Injection pressure: 2500 bar Extras Handling interface Hardened screw Weight/Dimensions Dob Eov U T Ncsm I S Ujcg 4.14 x 1.60 x 2.08 mtr. (L x W x H) Weight: 3650 kg Connected load: 80 A Warranty Warranty until first use Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg Dceb Em I Setqf Rzj Ueg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 3 - 120 mm no. of strokes - 95 /min distance table/ram, stroke up 500 mm table surface area 1100 x 700 mm Hole in the table 220 x 100 mm table height over floor 800 mm side window 400 mm ram surface 750 x350 mm ram adjustment 100 mm Oil volume 1300 l Dcsb Em I Ssvut Tzj Uog power requirement 42,0 kW weight 10,0 t dimensions (WxDxH) 1,8 x 1,8 x 3,55 m permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed no foundation pit necessary Option additionally: decoiler Fecker (price on request) can be offered with or without putting into operation - video at seller's site before dismantling available