Used Ciata 245 S for sale (11,907)

Condition: good (used), Year of construction: 2005, - 5 spindles - Min. working width 10 mm - Maximum working thickness 120 mm - Variable speed drive 5-29 m/min - Rotation of the machining spindle 6,000 rpm - Diameter of the machining spindle 40 mm - Tool diameter max 180 mm - Pneumatic clamp - tilting the heads at an angle Crobeiu E Rtovr H Aaeb heads order: 1. Rights 2. Rights 3. Left 4. Left 5. Left Installed power 18 kW 39A

Condition: used, Year of construction: 2006, machine/vehicle number: 3301810011001, The system consists of a TEKA graphite extraction system type PF/S in connection with a TEBARON air cleaner Cebvrsvg Exys H Aajrb The system is fully functional with the corresponding accessories.

Year of construction: 2014, Condition: excellent (used), Specification Product condition: Used from old Stock Traces of use: Slight Manufacturer: Eliog Guarantee in months: 12 Frequency: 50 Hz Power: 19,8 kW Voltage: 3 x 400 V AC Current: 35 A Temperature: 180 C° InsideØ: 75 x 100 x 130 cm Weight: 600 kg Crobsng Hdujvr H Aaeb Stock location: Rosenfeld Stock ground: Feld 10

Condition: excellent (used), Functionality: fully functional, planing width: 430 mm, total length: 3,960 mm, total height: 1,450 mm, total width: 1,100 mm, table length: 3,960 mm, chip removal for surfacing (max.): 140 mm, number of blades: 4, type of input current: three-phase, type of motor: three-phase motor, blade shaft speed (max.): 5,000 rpm, Equipment: motor brake, Planer, planer SAC FS 430.S Specification: Cjbvr H Asvrqxveaerb • condition - used • manufacturer - SAC • model - FS 430.S • working width - 430 mm • length of the tops - 3960 mm • 2500 mm long infeed top • angle-adjustable culaga with dimensions. 1800x160 mm • engine power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max. collection thickness - 8 mm • electrically adjustable planing height from the desktop • electronic chip thickness indicator • silencing combs on the shaft • brake on the engine • health and safety guard above the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • start-up - star-delta • sawdust extraction outlet - fi 140 mm • 1996 year of manufacture • weight - 650 kg • the machine meets CE standards • dimensions 396 x 110 x 145 cm (length x width x height) Additional information: • very good technical condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 125 mm suction socket 2 x Ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Table milling machine with one-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Positioning control for height and swivel adjustment with zeroing of the height and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Push button for spindle start and stop Left and right rotation Cutter quick clamping device Fine planed cast iron table with rigid frame support Control panel at the bottom of rigid frame support Cjbvrofpb Nms H Aasrb Milling stop 216 total adjustment via handwheel and LCD display incl. cast stop plates and aluminium splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, not exchangeable CE-conform GS tested

Condition: excellent (used), Year of construction: 2017, Swivel spindle router, table router, wood router, carpenter router PANHANS Type: 245/30 Year of manufacture 2017 Incl. Aigner integral stop Crebvr H Asvk A T Aoasb Continuously adjustable spindle speed adjustable from 1500 to 10,000 rpm Table dimensions approx. 110 x 76 cm + table extension on both sides with extendable support rail Milling stop with fine adjustment and swiveling device Electrical programmable height adjustment with digital display Electrical programmable swiveling -45.5° to + 45.5° with digital display of the swivel angle Milling shaft 30 mm Table extension with extendable support You can find suitable feed devices in my other articles. See pictures for condition, or note the article description. Parts can also be picked up yourself. All dimensions are approximate. All information is provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be picked up by the buyer or shipped at the buyer's expense.

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: Crebvjrzhfpsr H Aasb * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Promac brand paint machine, model S.3P.3L, consisting of paint pump, 3 paint guns, 3 UV lamps for drying and transport tape from 6200 x 10 mm, command panel, timers and 'manual/automatic' drives. Promac brand painting machine, model S.3P.3L, consisting of a painting pump, 3 painting guns, 3 UV lamps for drying and a 6200 x 10 mm conveyor belt, control panel, timers and “manual/automatic” drives. Csbvr H Aeivurxjajrb

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, 2; 2S; 3; 3S; 6 and UC200/400 Crebvrsgynw De H Aajb

Condition: new, Year of construction: 2021, operating hours: 3 h, Functionality: fully functional, Closer for cardboard tubes production 2021 used only for tests 3 h work fully functional. Closer works with 99mm diameter format 20pcs/min Crsbvreuquqpe H Aaob

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 140 mm suction socket 2 x ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German machine construction Table milling machine with double-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Operation via handwheel at the bottom of the machine stand Csbvr H Asgz Sifsasrb Height and swivel adjustment via handwheels Analogue dial gauges for height and swivel adjustment 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Electronic speed display Push button for spindle start and stop Left and right rotation Cutter quick clamping device Finely planed cast iron table Operation easily visible and accessible at the bottom of the machine body Milling stop 215 total adjustment via handwheel incl. multiplex stop plates Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa CE tested GS tested

Condition: used, Year of construction: 1998, Technical details: x-travel: 500 mm y-travel: 300 mm z-travel: 350 mm weight of the machine ca.: 5,7 t dimensions of the machine ca.: 286 cm x 276 cm x 290 cm mm x 2600mm (ohne Filteranlage u. Späneförderer) m tool magazin:: 36 tool taper: SK40 turning speed range: 0-9000 U/min main drive motor: 18 kW 2 Pallet Changer 500 mm x 300 mm incl. 4. axis , fixed on first pallet incl. filter mist model AFS 600 incl. BLUM tool setter incl. 20 pcs. SK 40 tools ( starter kit ) incl. internal cooling system ( IKZ ) 20 bar and paperfilter incl. chipconveyer incl. Machine documentation: circuit diagrams, electrical plans, operating instructions, etc. Miscellaneous: Machining is possible on the device bridge or the rotary swivel device. Very nice condition , from first hand ( optical industry ) approx 33.500 hours ( spindel ON ) Crjbvr Hjizxrns Aajb *

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system Cjberzhfhsvr H Aasrb

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 25 mm, feed length Z-axis: 150 mm, workpiece diameter (max.): 300 mm, nominal diameter: 130 mm, TECHNICAL DETAILS Control: Siemens 840 D Nominal module in steel with approx. 600 N/mm² tensile strength: 4 Largest tooth width: 25 mm Largest nominal diameter: 130 mm Largest helix angle when using 125 mm diameter cutting wheels: ± 45° Workpiece with internal gearing Nominal module in steel with approx. 600 N/mm² tensile strength: 4 mm Largest tooth width: 25 mm Largest swing diameter: 300 mm Largest inner diameter: 130 mm Tool Largest permissible cutting wheel diameter: 175 mm Cutting wheel holder – diameter: 1.5 inches Cutting wheel holder – taper in the shaping spindle: PKP 45 hollow steep taper – Bauer Travel paths Radial (X-axis): 230 mm Manual transverse column adjustment (Y-axis): ± 25 mm Csbvr Howc Tg No Aajrb Adjustment range of the axial slide (Z-axis): 150 mm Workpiece table Outer diameter: 168.14 mm Bore: 65.532 mm Spindle spindle Largest stroke length (V-axis): 30 mm Spindle axis adjustment range: ± 0.25° MACHINE DETAILS Length: 6,435 mm Width: 4,560 mm Height: 4,400 mm Weight: approx. 11,000 kg

Condition: used, machine/vehicle number: 007789, Max. panel width: 920 mm Max. panel length: 3000 mm No of Top Units: 2 Positioning of Units by NC: yes Cebvrevzc Syo H Aaerb Lateral horizontal groups: yes

Condition: ready for operation (used), total height: 3,300 mm, total length: 5,200 mm, throat depth: 430 mm, operating speed: 10 mm/s, table width: 154 mm, retraction speed: 100 mm/s, travel distance Z-axis: 365 mm, controller manufacturer: Delem DA66W, power: 37 kW (50.31 HP), net weight: 21,000 kg, opening height: 630 mm, passage width: 3,600 mm, total depth: 2,750 mm, Y1/Y2/X/R/V CNC bombation servocontrolled laser security tools included Crjbvowhrz Aor H Aaeb tooling: bending die V130 - 4100 mm length bending die V160 - 5 pieces 415 mm Capacity: 320 ton x 4050 mm Backgauge: CNC Locking speed: 100 mm/sec

Condition: excellent (used), Year of construction: 1998, Hardinge HXL-S CNC Lathe Fagor Control Year 1998 Manuals Great Condition - Fully Working with no faults. We welcome any inspections Cobvrsr Nc Ets H Aajrb

Condition: used, mileage: 22,597 km, Year of construction: 1977, Serial number: BC01TM8xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18848 Specifications car: - 1977 model - Rep. Object - 144 Hp - Km: 22597 - 4x2 - 3 way tips - Rear brakes warm driven - Engine and gearbox are broker - Comes with another complete engine and gearbox - Spare parts included - Climate Cjbvrevgx Hqe H Aajrb - Light - Ready for delivery Specifications crane: - 1987 model - Sesame swing crane - 7 a.m - Extra hydraulics for boys - 2 Hydraulic outriggers - 2 Manual ejectors - Ready for delivery Description: Engine and gearbox are shared. Therefore sold as a rep object. It comes with a complete engine and gearbox with a lot of spare parts for the next owner. Grabb can be accompanied for extra cost Ready for delivery Km: 22597 HK: 144 Technical approved: no EU-approved until: 31.08.2018 Own weight: 7250 Total Weight: 13000 Payload: 5680 Width: 240 Length: 645

Condition: used, Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) Crjbvr H Aot D Hqnoaob With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Csbvrjwhkywj H Aaorb

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: AA.70189, Brand: SCM Model: P-230-S Machine no: AA.70189 Feeder: Mahros Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Csbvr H Aer H Ighjajrb Tech. info: Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), total length: 12,000 mm, engine type: Scania DC13 (EU-4 / EPA tier 4F), drive type: Diesel, construction width: 4,185 mm, net weight: 83,700 kg, Full container reachstacker Crebvrjwhg Ano H Aaob Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera

Year of construction: 1995, Condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Minimum quantity spray device Cjbvjv Ip T Dor H Aaorb chip conveyor belt Weight: approx. 2,800 kg

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Machine no: 431 Crsbsldg Skjvr H Aajb Year of manufacture: 1975 Tech. info: Blade diam: 700mm Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM

Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Cjbvr Hjtpm S Es Aajrb Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA