Used Ciata 140 for sale (8,752)

Condition: new, bending length: 2050sheet thickness: 4.5upper roll diameter: 140 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Creb Enjd Ab Nujah Usb Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.489,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: as good as new (ex-display), For sale Crsb Eeh Up Uysnah Usb Hoist motor used/reconditioned for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: new, OSTAS PLATE ROLLER TYPE ORM 2070 x 140 - Capacity 2070 x 4 mm - Electrically adjustable back roller - Electrically adjustable bottom roller (material clamping) Crsb Enaegg Nubeh Ujb - Digital readout for rear roller movement - Hardened rollers - Conical rollers - Emergency stop - Documentation Digital readout for bottom roller movement (material clamping) - Hardened rollers - Conical rollers - Swivelling top roll - Brake motor - Emergency stop - Documentations - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, Year of construction: 2023, Wood gasification technology that converts biomass (wood chips) into wood gas. The obtained wood gas is used in the production of electricity and heat. Gasifiers are reaching electrical efficiency up to 30% and with fuel utilisation rate up to 90%. The capacity of one unit is up to 140 kWel and heat up to 300 kWth. System is modular and can be used both for small project and also larger plants with electrical power up to 2000kWel and heat up to 4000kWth. Energy-producing systems are additionally equipped with wood gas filtration and cooling systems, ash removal, and emergency cooling systems. Offer for one unit include : - Wood chip feed module - Gasifier - Control cabinet for gasifier - Air preheater - Gas filter - Gas cooling module - Safety filter module - Ash discharge module - Cold start module Creb Eepa Sthjnah Usb - Waste bunker - Wiring set - Engine unit with generator - Control cabinet for engine - Gasifier chimney for cold start - Chimney for engine

Condition: excellent (used), Year of construction: 2011, Extraction system Crsbsu Rpkxo Enah Usb Manufacturer: Alko Type: Power Unit 140 H Year of construction: 2011 Suction nozzle diameter: 140 mm Power: 2.2 kW Volume flow: 1,108 m³/h Negative pressure: 2,591 pa Weight: approx. approx. 237 kg

Condition: good (used), Year of construction: 1993, Horizontal and intermittently operating machine for the production and sealing of single or twin flat bags (sachets) with a maximum output of 120 cycles (240 sachets/min.). Crebjt Aan Rj Enah Ujb Filling volume: 0.25 - 25 cc Manufacturer: Volpak Year of construction: 1993 Floor Space: 290 x 110 x 270 cm

Condition: new, bending length: 1600sheet length: 1600upper roll diameter: 140sheet thickness: 6 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- Creb Enjd Ab Smjah Usb - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.580,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Year of construction: 2016, operating hours: 8 h, load capacity: 1,400 kg, fork length: 1,150 mm, drive type: Elektro, Low lift truck Technical condition: New Battery Volt: 24V Battery Ah: 150Ah Battery year of construction: 2016 Description: Prices are subject to change, ex stock, plus freight and VAT. no warranty/guarantee and no return. Inspection possible by arrangement. Our general terms and conditions apply. Cobsu D Swnj Enah Uorb Support wheel polyurethane, fork rollers single polyurethane, PIN code

Condition: excellent (used), Year of construction: 2019, Peripherals - gwk PTW 140-1Selection eco Year 2019 Min/max operating temperature 5-140c° Csb Ensvt Er Teah Ujrb CW 62

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 14524145, filter area: 9.5 m², negative pressure: 2,200 Pa, intake manifold diameter: 160 mm, nominal flow rate: 1.447 m³/h, overall weight: 345 kg, total width: 900 mm, total length: 1,715 mm, total height: 2,130 mm, input voltage: 400 V, noise level: 69 dB, input current: 5 A, type of motor: three-phase motor, frequency: 50 Hz, motor voltage: 400 V, input frequency: 50 Hz, Schuko suction unit Vacomat 140/160 XPe Suction connection D = 140 / 160 mm, Filter area 9.5 m², Dust class "M", Test mark H3/BGHM HO 193023, motorized filter regeneration, Motor power 2.2 kW, Crsb Enahst D U Eys Uob nominal volume flow 1,447 m³, ex location Seevetal, without transportation, Subject to prior sale.

Year of construction: 1993, Condition: good (used), Balancing machine Csbjfi Tp Es Enah Ujrb Capacity: 30 kg Max rotor diameter: 600 mm Balancing speed: 900 rpm Power: 1.5 kW

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 91233, Connected load 380V 2,2kW Type B1 nominal air capacity 1500 m³/h HxWxD: 1950 x 800 x 1200 mm intake 140 mm mobile Ceb Eok T At Isnah Uorb

Condition: new, bending length: 2600sheet thickness: 4upper roll diameter: 140sheet length: 2.600 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Crsb Enjd Ab Nrsah Ujb Options: - Lower roll powered by electric motor EURO 1.513,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- We have many references!

Condition: used, Year of construction: 2016, operating hours: 51 h, load capacity: 1,400 kg, fork length: 1,150 mm, drive type: Elektro, Low lift truck Technical condition: New Battery Volt: 24V Csb Enaeu D Swhsh Uerb Battery Ah: 150Ah Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Inspection possible by arrangement. Our general terms and conditions apply. Support wheel polyurethane, fork rollers single polyurethane, PIN code

Condition: used, Year of construction: 1999, sheet width 1050 mm plate thickness 5,5 mm distance between columns 1150 mm roll diameter 140 mm total power requirement 2,2 KW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,85 x 0,85 x 1,1 mm Sheet metal bending machine 3 rollers - Digital display for rear roller - 2 driven rollers Creb Enahsvki Dzj Uob - Conical device - Hardened rollers - Foot switch - Emergency stop device

Condition: refurbished (used), Year of construction: 2013, operating hours: 1,478 h, machine/vehicle number: 774400356826, working width: 880 mm, area performance: 5,300 m²/h, overall weight: 750 kg, tank capacity: 138 l, battery voltage: 24 V, battery capacity: 240 Ah, The Hako Scrubmaster B140 R is from 2013 and has only clocked up 1478 operating hours. It was completely dismantled by us and every component was checked for function and cleaned. Cobsttl Ags Enah Uorb It has four new maintenance-free gel batteries that can be charged via an external charger. The side scrapers were sandblasted and powder-coated in-house, as was the squeegee, which was fitted with new suction lips. A new suction motor has been installed and the brush deck has new bearings. It is suitable for the daily cleaning of medium to large areas such as halls, workshops or underground garages. Technical data: Working width: 88cm Area performance: 5300m²/h Fresh water/dirty water tank: 138 liters

Condition: good (used), Stainless impeller and housing Manufacturer: STORK Pumpen Type: FRER 80-140 Creben R D Tko Enah Ueb Overall dimensions: 1000 x 400 x 550 mm Throat sizes: DN80; DN80 Voltage: 400 V Electrical power: 5,5 kW

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, TECHNICAL DETAILS Press: Tecnopress KZP 40 Robot: ABB Robotics IRB4400 M97A Oven: Westofen WESTOMAT 90S MC Csb Ensul Srasah Ujrb Lubricator: Wollin PSM-324

Condition: new, bending length: 1250sheet thickness: 5.5upper roll diameter: 140 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls Crjb Enaed Ab Nvjh Ujb - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.489,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: used, Functionality: fully functional, machine/vehicle number: 2487168, Year of construction: 2022, load capacity: 4,000 kg, fuel type: diesel, construction height: 2,590 mm, power: 55 kW (74.78 HP), color: yellow, fuel: diesel, Equipment: all wheel drive, cabin, pallet forks, Technical data: Lifting height: 13.78 m Rated load capacity: 4000 kg Max. Power: 55 kW Cjb Enaotyx Irjh Uerb All-wheel drive, all-wheel steering, continuously variable hydrostatic transmission, fully functional, general signs of use

Condition: new, Year of construction: 2024, Functionality: fully functional, warranty duration: 12 months, Clean gas dust extractor Technical data: - Motor 2.2 kW-400V-50Hz - Suction nozzle d=140 mm - Volume flow: 1400 m³/h - Pressure increase: 2,250 Pa - Filter area 5.6 m² (20 filter bags) - Filter cleaning via vibration motor (automatic) - Chip garbage can 120 l with clamping bracket - Noise value: 72 dB (A) according to MRI (+/- 4dB) - Dimensions: lxwxh=1,700x800x2,050 mm - Weight 350 kg Cjb Esuff Ugonah Uorb

Condition: new, overall weight: 14 kg, empty load weight: 3 kg, maximum load weight: 11 kg, axle configuration: 2 axles, tire size: 285 / 70 r 19,5, machine/vehicle number: 06b624786df9f4b5c196a36b0, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing 2-speed gearbox support foot at the front Folding rear support Wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 285 / 70 R 19,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Lights completely in LED version (note! with certain towing vehicles, misdiagnosis can occur, although the function is given) 1 x 15-pin plug at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck power take-off Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls) Rear wall hinged and as 2-leaf door (cannot be folded down), with door holder and protective rubber on the side Platform width 2420 mm Creb Enaoi Ri Ipoh Usb 5 pairs of lashing eyes in the floor, 5 tons each Country of registration / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation15-year warranty against rusting through Dropside/bridge RAL 3002, carmine red Please note! Bridge only primed inside! Attention: Archive pictures!

Condition: used, Functionality: fully functional, machine/vehicle number: 2487008, Year of construction: 2021, load capacity: 4,000 kg, fuel type: diesel, construction height: 2,590 mm, power: 55 kW (74.78 HP), color: yellow, fuel: diesel, Equipment: all wheel drive, cabin, pallet forks, Technical data: Lifting height: 13.78 m Rated load capacity: 4000 kg Max. Power: 55 kW Csb Eetyxnxonah Uorb All-wheel drive, all-wheel steering, continuously variable hydrostatic transmission, fully functional, general signs of use

Condition: used, Functionality: fully functional, machine/vehicle number: 2486718, Year of construction: 2020, load capacity: 4,000 kg, fuel type: diesel, construction height: 2,590 mm, power: 55 kW (74.78 HP), color: yellow, fuel: diesel, Equipment: all wheel drive, cabin, pallet forks, Technical data: Lifting height: 13.78 m Rated load capacity: 4000 kg Max. Power: 55 kW All-wheel drive, all-wheel steering, continuously variable hydrostatic transmission, fully functional, general signs of use Crobotyxnrj Enah Usb

Condition: used, Functionality: fully functional, machine/vehicle number: 2485798, Year of construction: 2019, load capacity: 4,000 kg, fuel type: diesel, construction height: 2,590 mm, power: 55 kW (74.78 HP), color: yellow, fuel: diesel, Equipment: all wheel drive, cabin, pallet forks, Technical data: Lifting height: 13.78 m Crobjtyxnlj Enah Uob Rated load capacity: 4000 kg Max. Power: 55 kW All-wheel drive, all-wheel steering, continuously variable hydrostatic transmission, fully functional, general signs of use