Used All-Kor Akb S400 for sale (56,170)

Condition: used, Industrial crane, yard crane, mobile crane, and machine-lifting crane VALLA Type V-Kart 55-E Chassis No. 7373, built in 1983 The crane has electrical problems with the drive control; sometimes the crane won't reverse. The best solution is probably a replacement or upgrade to a new drive control. Maximum load: 5.5 tons. At 1 meter outreach Hook height max. 5 meters without mechanical extension Hook height max. 7 meters with mechanical extension Load capacity: 1 meter outreach 5500 kg (without extension) 2 meter outreach 4000 kg 3 meter outreach 2000 kg 4.6 meter outreach 1050 kg 5.6 meter outreach 0.85 kg Hydraulic extension: 2 m Mechanical extension: 2.6 m - Telescopic boom with 2 hydraulic telescopic sections and a mechanical extension with extension - Can be moved with full load - 24-volt electric drive, driven steering axle with 2 electric motors - 24-volt automatic charger - Retraction width between the front wheels 90 cm - Hydraulic steering Cgeb Eeucapysp D Dhst - Overhead guard - 4286 operating hours read Length without extension 3000 mm Exterior width at front: 1730 mm Exterior width at rear: 1350 mm Height: 2170 mm Total weight: approx. 6 tons The crane has electrical problems with the drive control; sometimes the crane won't reverse. The best solution is probably a replacement or upgrade to a new drive control. Price is quoted as is

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Cgeb Ep Doiwlmcj Dhet Saw length 4318 mm

Condition: used, I-beam length: 4500 mm Total height: 3350 mm Cgeb Ep Dov Tm Dqs Dhjt Usable working length: 4000 mm Hook height: 2300 mm Distance between legs: 2900 mm

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, total width: 25,000 mm, total length: 100,000 mm, total height: 12,500 mm, Modular lightweight hall 25 m wide and 100 m long; steel structure ready for assembly; new film available from manufacturer within a few weeks; Cjb Eev Iltasp D Dhjgt

Year of construction: 2018, Condition: excellent (used), machine/vehicle number: WD974/22, Technical data: 1 Vetter / Demag pillar jib crane NL 250KG with Demag chain hoist Type AS2.5-4 Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 4.05m UK boom: approx. 3.6m Reach: approx. 4.2m Hook height: approx. 3.3m Total weight approx. 800Kg including dowel plate 630mm with Demag DC chain hoist 250Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment Csb Epsv Etc Dj D Dhsgt

Condition: like new (used), Year of construction: 2024, operating hours: 15 h, Functionality: fully functional, number of ink cartridges: 6, color channels: CMYK + W, number of print heads: 6, Fully functional Wallpen E2 vertical printing machine with white head in full equipment with printing extension up to 4 meters and another year of free toners. We don't have time for the machine because we have a job that fully utilizes us. Cob Ep Dowccn Ns Dhogt

Condition: refurbished (used), Functionality: fully functional, throat depth: 345 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 80 rpm, total height: 1,970 mm, spindle mount: MK 4, 1.) Alzmetall AB4/SV Speed range 80-720 rpm Feed rate 0.09/0.16/0.28 mm/rev Spindle taper MT4 Throat: approx. 345 mm Drive power: approx. 1.8 kW Column diameter: approx. Ø 160 mm Drill quill stroke: approx. 180 mm Table clamping area: approx. 730 x 560 mm with 14 mm T-slots Dimensions: 1000 x 500 x 1970 mm Weight approx. 600 kg Cgjb Epounhtxs D Dhst Price: €2,700 net plus VAT 2.) Gillardon GB30 Speed range 60-1600 rpm Spindle taper MT3 Throat: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Table clamping area: approx. Ø 500 mm with 14 mm T-slots Table swivel range: approx. +/- 90 degrees Dimensions: 1000 x 500 x 1970 mm Weight: approx. 400 kg Price: €2,300 net plus VAT

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 25799768, input voltage: 230 V, frequency: 50 Hz, Banderoling machine Csb Ep D Djwb Efnshegt

Year of construction: 2003, Condition: good (used), price. GALLUS EM 280 – 8-color Year of Manufacture: 2003 _____ Product Description:  Webwidth: 280mm  8 flexo printing units, set for quick unit change  8 UV curing Is with water cooled chill roller  8 pneumatic doctor blades  Unwinding, splice table, web guide,  Rewinders  Infeed unit Spindle 3”  Diecut station for 2 diecuts with 1 diecut unit, 2nd position empty  drive unit standard  label counter  mech matrix removal unit spindle 3”  output section (pull station)  rewinding unit  pneum winding spindle 3”  tension roller  web break and 1 matrix break detector  Razor knives  Automatic register control (including diecut) Machine Specifications and Equipment: Cgsb Ep D Djwa Aaashet _____ Accessories Included:  3 sets of printing cylinders and anilox rollers  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: good (used), Frame: 7000*1050 mm Traverses: 1800*100*50 mm 2400 kg/compartment If you need shelves or accessories in other configurations or designs, please contact us. Ceb Eouf Snaop D Dhsgt We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!

Year of construction: 2023, Condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Cgob Epocwamxs D Dhjt Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Equipment: -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; Cgsb Ep Dev Ev Tlj Dhet -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Condition: used, Voltage: 220V Three-phase Cjb Ep Djv Uxy Tj Dhjgt

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 25779368, input voltage: 230 V, frequency: 50 Hz, Banderoling machine Cgsb Ep D Dswb Ed Dehet

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Cgjb Ep Dsm Uykns Dhot

Condition: used, operating hours: 15,000 h, Functionality: fully functional, machine/vehicle number: Model 0408, pressing force: 150 t, this is a mould clamp for Polyurethane RRIM moulding, top and bottomPlatens tilt 35 degrees each, Platens open gap for mould is 2040mm, Platens closed gap is 650mm Cgjb Ep D Dowgkr Dshet Platen size is

Condition: good (used), Kallfass cutting system with 5 sawing units. Cgob Epovlixuo D Dhst Used. Good condition.

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm Cjb Epjvh I U Ts D Dhogt table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-belt Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical Specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Automatic length compensation to reduce the die gap - Film support plate available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650 SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Cgjb Epoh N Dwfs D Dhet Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is controlled by a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this machine or systems from other manufacturers. We reserve the right to sell the product at any time. Price is EXW. No guarantee is given for technical data.

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 25799769, input voltage: 230 V, frequency: 50 Hz, Banderoling machine Ceb Ejwb Ec Tsp D Dhogt

Condition: good (used), Year of construction: 1999, VERTICAL MACHINING CENTER PALLETIZED HITACHI SEIKI S 50 CNC TYPE FANUC M18 X 1000 Y 500 Z 500 2 Pallets 1000 x 450 spindle 10000 rpm cooling in the center ATC 30 stations ISO 50 chip conveyor Csb Epovtlt Do D Dhjgt

Condition: new, Year of construction: 2006, Functionality: fully functional, New and unused Allweiler centrifugal pump, model NI 100-250/01. Cgjb Eev Dw Hkop D Dhst 120 m3/h / 12 kW

Condition: good (used), Year of construction: 1975, Functionality: fully functional, Width x Depth x Height: 80cm x 80cm x 190cm Sale only within EU member states! Not for private sale MAE from training workshop Cgebovf D T He Ep D Dhet MAE is available for inspection. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-strip Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Film support plate optional - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Cgjb Epsiqtuws D Dhet Installation of the system is included in Germany, Austria, Western Europe, parts of Eastern Europe, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is achieved via a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this or systems from other manufacturers. Subject to prior sale. Prices are EXW. No guarantee is given for technical data.

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 24718565, input voltage: 230 V, frequency: 50 Hz, Banderoling machine Cgobswb Ea Sj Ep D Dhet