Used All-Kor Akb S40 for sale (56,284)

Condition: used, Condition: Used machine Year of manufacture: 2023 Working hours: upon request Engine: Perkins Diesel – with AdBlue & DPF (diesel particulate filter) Power: 86 kW = 116 HP Delqzel Uvghoa Rxskl Registration: 20 km/h Emission standard: (Stage V) Drive: 4x4 all-wheel drive Maximum lifting capacity: 4000 kg Maximum lifting height: 18 m Rotation: 400° Weight: 14,700 kg Overall length: 6.63 m Overall height: 3.03 m Overall width: 2.38 m Tires: 100% good, 400/70x20" Mitas MPT01 wheels with studded tires, fenders Support: automatic Equipment: • 400° rotation • Anti-tip system with blocking of dangerous objects Movements • Hydraulic connector for any accessories on the mast head • Socket for attachments on the telescopic head • Soundproof, enclosed cabin with heating, ROPS – FOPS approved • Rear and front axles with self-locking differential (limited slip 45%) • Hour meter • Joystick capacitive sensor system & dead man's switch • Dual joystick control 4-1 (proportional control) • Radio remote control for work basket and lifting equipment • Inching pedal for precise (oil distribution for travel and working movements) • Adjustable steering wheel • Work lights front and rear on the cabin (LED) • 3 steering modes (2-wheel, 4-wheel & crab steering) • "Wheels in straight line" indicator light with automatic locking • Sunshade roller blind • Work basket • Lattice boom with 2-ton cable winch • Pallet forks, buckets, etc. available as options. _____ Leasing available through leasing partners This offer is non-binding and subject to change. We would be happy to demonstrate the machine to you and provide you with a customized quote. The machine has CE approval and documentation is available. No liability is assumed for input errors. Errors and prior sale excepted.

Condition: used, Functionality: fully functional, Year of construction: 1996, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: standard, construction height: 3,010 mm, fork carriage width: 1,500 mm, fork length: 1,100 mm, total length: 3,280 mm, drive type: Elektro, construction width: 2,060 mm, net weight: 5,958 kg, Four-way sideloader Load center of gravity: 550 Fork width: 150 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 80V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EVS40/12-11/45 ST LK8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Delqzewdkngoa Rxekl Fork positioner, Platform height: 380 mm

Condition: used, mileage: 27,419 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,200 kg, first registration: 09/2008, next inspection (TÜV): 10/2024, loading space length: 2,050 mm, loading space width: 1,500 mm, loading space height: 400 mm, color: orange, number of seats: 2, Year of construction: 2008, total length: 4,700 mm, total width: 1,650 mm, total height: 2,350 mm, Multicar 3-way tipper truck, type M 30, * First registered in September 2008, * Mileage: 27,412 km as read on the odometer, * Operating hours: --- not readable on the odometer, * Powered by a 4-cylinder Iveco diesel engine with 107 kW / 145 hp, Djlqza Rev R Rqpjxekl * Displacement: 2,998 cc, * Manual 5-speed transmission, * Single cab with 2 seats, * Tire size: 225/75 R 16C, tread pattern: 4 mm at the front and 6 mm at the rear, * Wheelbase: 3,480 mm, wheel configuration: 4x4, * Overall dimensions (length x width x height): 4,850 x 1,600 x 2,300 mm, * Gross vehicle weight: 5,200 kg, Unladen weight: 2,650 kg, Payload: 2,430 kg, * Trailer capacity: 3,500 kg Braked, * Platform dimensions (length x width x height): 2050 x 1500 x 400 mm, * Ball-head trailer hitch, auxiliary drive, differential lock, * Power steering, large hydraulic system, mounting plate, work lights, gear reduction, * Tipper switch not working, rust damage This description does not constitute a binding offer and may contain errors. No guarantee for all information. Please also visit our website

Condition: used, Year of construction: 2022, operating hours: 701 h, 2022 | Komatsu | Komatsu WA70M-8E0 with bucket and palletfork | Used Wheel Loader | 701 hours 📍Location: Germany, Offenbach am Main 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 44900 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 55 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: No defects found, all functions run through. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37563 Equippo" 💡 Why Buy from Us? Delqzaswdqg Ao Rxekl ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Functionality: fully functional, Technical details: • Manufacturer: Gerhard Müller, Nuremberg • Model: AZMETALL • Machine type: Pillar drilling machine • Speed ranges: 300 / 500 / 850 / 1300 / 2250 rpm (continuously adjustable via belt drive) • Max. drilling diameter: approx. 25-30 mm (depending on the material) • Spindle mount: Morse taper (probably MK2 or MK3) Dkjlqza Rjv Ex Rtexsl • Drilling depth: approx. 120 mm • Table: Height adjustable and rotatable around the column • Drive: Electric motor with belt drive, 380 V (three-phase current) • Condition: Used, fully functional, ready for immediate use

Condition: excellent (used), Year of construction: 2013, operating hours: 66,400 h, Functionality: fully functional, Alup Allegro 76 Variable speed drive. Volume flow 4.18 - 14.43 m3/min. With energy recovery. Djlqeqy Ea Seza Rxokl

Condition: excellent (used), Functionality: fully functional, Miter right + left miter by 60° --- 6 cutting speeds : 8 - 50 m/min Cutting height max. 130 mm Dkolev Eglfoqza Rxjl Cutting length at 90° / 45° / 30° = 400 / 280 / 150 mm - Hydraulic material clamping vertically and horizontally - Hydraulic feed - Roller conveyor width 400 mm . Measuring strokes, optionally 2000 mm or 3000 mm .

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Dkolqjwchwisza Rxjl Application Types Injection Moulding

Condition: used, color: other, Attachment suited for: Construction machines Technical condition: good Price: On request Dolqzetyxrqea Rxokl

Condition: used, Year of construction: 2010, operating hours: 8,000 h, * Terex TW110 wheeled excavator * Year of manufacture 2010 * 8,000 hours * 11,500 kg * 74.9 kW Deutz engine Dkelewh E Trjqza Rxol * All lines * Mechanical quick coupler * Adjustable boom * 3 backhoe buckets: 35 cm, 60 cm, 90 cm * Hydraulic trenching bucket: 170 cm * Track width 250 cm * 20 km/h

Condition: used, mileage: 568,000 km, power: 320 kW (435.08 HP), first registration: 03/2009, overall weight: 18,000 kg, fuel type: diesel, emission class: euro5, Equipment: ABS, air conditioning, Actros 2044 EZ: km 4X4 ALL-WHEEL Registered as a swap vehicle SZM + tractor for trailer Dkslqza Rov Emqnsxjl Code 88 registration as LOF possible everyone has to check for themselves whether this is possible or not Hydraulics 2 circuit Euro 5 Leaf/air Air conditioning German vehicle EPS with clutch - 3 pedals Tel: We are happy to take care of your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number VAT deposit 2000 ¤ we speak English govorimo Srpsko-Hrvatski our service for you: - Customs license plate - Export documents and EUR1 - Transport worldwide - Accommodation options - Transfer Munich Airport or Passau train station Tel:

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Dkolqza Rswcnnuexel Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: used, power: 17 kW (23.11 HP), Equipment: all wheel drive, cabin, front linkage, Your authorized ISEKI ? Specialized dealer with competence, service and advice offers you : Municipal tractor ISEKI TXGS 24 all-wheel drive with snow blade and round spreader IMMEDIATELY AVAILABLE ! Equipment: - 3 cylinder diesel engine with 27 HP Dkolqza Rswhhc Ajxel - Stepless hydrostatic drive with 2-stage countershaft unit - Speed 0 - 15 km/h - Differential lock effective on rear axle - All-wheel drive can be engaged and disengaged separately - Rear PTO with 540 rpm - Intermediate axle PTO with 2,000 rpm - PTO shafts can be switched under load - Disc brake in oil bath effective on the rear axle - Fully hydraulic steering - Rear power lift cat. 1 incl. top link - Front power lift with quick coupler cat. 0 - Hydraulic connections 2 x rear and 2x front - Turf tires front 18 x 8.50 - 8 and rear 26 x 12.00 -12 Safety cab: Consisting of CE-approved safety frame, 4-sided safety glazing and sun protection tinting, opening doors with wide entrance, floor assembly with non-slip rubber coating, integrated underfloor heating, windshield wiper, 2 large exterior mirrors, sun protection roller blind, coat hooks, front and rear window can be opened via gas pressure dampers, hot water heating with 2-stage fan and adjustable air nozzles, preparation for rear window heating Comfort interior with sound-absorbing trim, radio preparation Windshield washer system for the windshield Comfort seat adjustable to driver's weight LED auxiliary headlights Rear left LED work light LED rotating beacon including accessories: ISEKI RSM 130 snow blade - Working width from 1,100 mm ? 1,300 mm - Hydraulic lateral adjustment - Vulkolan blade, height-adjustable skids - Overload protection through folding function of the blade SP150ES stainless steel centrifugal broadcaster - Attachment via rear pivot point - 160 liter stainless steel hopper - Spreading bucket, spreading apron and quantity metering device made of stainless steel - incl. PTO shaft, filling sieve, agitator fingers, tarpaulin * Errors, changes and prior sale reserved. Our general terms and conditions apply. * All information without guarantee * The vehicle description serves only for the general identification of the vehicle / object and does not constitute a warranty or assurance in the sense of sales law. * The information does not claim to be correct or complete * Please check the information relevant to you with the seller before purchasing Over 25 years of experience in the sale and servicing of commercial vehicles guarantee competent advice and implementation of your equipment requirements. Let us make you an individual offer. You can also take advantage of our leasing and financing options. Further commercial vehicle offers from the manufacturers ISUZU and MULTICAR as well as various attachments can be found at Tel:

Condition: new, Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 50.4014.369.22, overall weight: 656 kg, power: 1.1 kW (1.50 HP), NEW! TESTED! FULLY FUNCTIONAL! TAURUS 4014 speed-up vacuum press Oil-lubricated vacuum pump Capacity: 40 m³/h Connection: 400 volts Vacuum distribution plate Tank capacity: 2 x 100 l Highly stable chassis Additional vacuum connection with 13 mm hose nozzle speed-up: Pressure up to 10 t/m² (depending on ambient pressure) Up to 50% shorter pressing time Clamping dimensions L x W: 4,000 x 1,420 mm Dslqza Rowhwyqsxekl Installation dimensions L x W x H: 4,290 x 1,650 x 940 mm

Condition: excellent (used), Zwick Roell Type: Z100 TEW Technical Data Item No.: 1004501 Test force Fmax: 100 kN Test Chamber Test chamber height: Total height: 1934 mm Height of lower test chamber, without fixtures: 1755 mm Height of upper test chamber, without fixtures (additional crosshead required): 1800 mm Test chamber width: 640 mm Load frame Load frame height: Height without support profiles: 2169 mm Height with support profiles: 2284 ... 3094 mm Load frame width: Width without support profiles: 960 mm Width with support profiles: 1136 mm Width with support profiles and machine electronics: 1329 mm Load frame depth: Depth: 140 mm Depth without Stand profiles, with drive base: 584 mm Depth with stand profiles: 781 mm Weight: with machine electronics without stand profiles, approx.: 470 kg optional stand profiles (one pair), approx.: 34 kg with typical fixtures, approx.: 570 kg Installation area: pure footprint: 0.01 m2 Load frame footprint: 0.867 m2 Specific floor load: based on typical fixtures: 559 kN/m2 with 50% safety: 839 kN/m2 Dolqzaewcqrpj Rxekl Ceiling load: based on typical fixtures: 6 kN/m2 with 50% safety: 9 kN/m2 Paint finish: RAL 7021 and RAL 7038 Ambient temperature: +10 ... +35 °C Relative humidity (non-condensing): 20 ... 90% Average sound pressure level At vmax measured at a distance of 1 m from the front of the machine: 66 dB(A) Drive Crosshead speed vmin ... vmax 0.0001 ... 1500 mm/min Crosshead return speed, max.: 2500 mm/min Deviation from the set drive speed, max.: 0.05% of vact Drive travel resolution: 0.484471 nm Positioning repeatability (without direction reversal): ±2.0 μm Controller: adaptive Remote control testControl II Safety device Force transducer 100 kN Type: Xforce K Hydraulic power unit Height: 584 mm Width: 502 mm Depth: 817 mm Hydraulic specimen holder Max. test force (Fmax): 70 kN Max. clamping force (at 300 bar): 110 kN The hydraulic specimen grips are designed for tensile, compression, and alternating load tests (static, tensile, pulsating) and are suitable for the following applications: Application Area - Specimen Material: Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals, metal-ceramic composites, hard and reinforced plastics, composite materials, similar materials - Specimen Shape: Flat specimens, round specimens (strips and shoulder specimens), especially small specimens with short clamping lengths - Loading Type: Tensile, compression, alternating load MakroXtens Extensometer Drag Force: ≤ 0.05 N Clamping Force of the Sensor, Manually Adjustable: 0.1 ... 2 N Resolution in conjunction with: 300 mm lever arm length: 0.006 μm 450 mm lever arm length: 0.009 μm 600 mm lever arm length: 0.012 μm Maximum initial gauge length: up to 100 mm Maximum sample width: 60 mm Maximum sample thickness/diameter: 30 mm Dimensions: Height: 375 mm Width: 167 mm Depth: 375 mm Test software: testXpert 3 v1.2 Year of manufacture: 2018 Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, mileage: 350,800 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, maximum load weight: 1,400 kg, first registration: 03/2011, loading space height: 1,900 mm, loading space volume: 3,700 m³, emission class: euro5, color: white, number of seats: 3, Year of construction: 2011, DEK:[9486101] - WE CAN ONLY SELL THIS VEHICLE ABROAD TO OPERATORS IN THE SECTOR, NO SALE IN ITALY - - Used Van: Renault Master 35 Van L3 H2 Long Wheelbase. - Year: 2011, Engine: 2.3 dCi 150cv Euro 5, 6-speed gearbox, Km: 350,800. - L3 H2 van, 35 q.li full load, cargo area dimensions: 3,700 x h. 1,900 mm, with plywood floor covering and full-height paneling. - Equipped with: Climate control, Radio-CD, On-board computer, Central locking. - Bodywork with various scratches and dents, missing rear door handle, Worn interior, Running mechanics. MOT valid until April 2026. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sellers: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province) Lombardy opening hours: Monday to Friday: 8.30 / 12.15 - 14.00 / 19.00 Saturday: 8.30 / 12.00 - 14.00 / 17.00 - Certified mileage. - Possible road test by appointment. - Transfer of ownership on site. - Possibility of personalized financing. Carlo Mauri Srl declines all responsibility for any involuntary inconsistencies present in the advertisement which does not represent any contractual commitment, the prices shown are exclusive of VAT and transfer of ownership. Dkolewh Iwgsqza Rxel

Condition: new, Complete set of safety mats for a CNC machine, new and in original packaging. Includes all components required for the safe operation of a CNC machine. Very easy to install, can be installed by a trained machine operator. Overall dimensions: 5600 mm long and 1330 mm wide. Weight approx. 350 kg. Delqza Rjv T Na Ijxekl Supplied with plug-in safety mats in the following sizes: - 3 pieces 1000 x 1200 - 2 pieces 750 x 1200 - 2 pieces 500 x 1200 - 6 pieces plug-in connection cables - 1 piece transition strip for the machine - 9 pieces aluminum cover profiles - 2 pieces middle zone connecting bars in yellow - 2 pieces outer zone connecting bars in black - 1 piece assembly instructions Unfortunately, we ordered the incorrect safety mats, and since these are manufactured goods, we cannot exchange them. In the last picture, we have assembled the reorder; it is for your convenience only. We are happy to ship the goods; the buyer bears the shipping costs.

Condition: excellent (used), Year of construction: 2007, Arburg 520A 1300-170 Alldrive / Electric machine / Operating hours: 28,847 in automatic mode Year of manufacture: November 2007 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 cc Clamping unit: Clamping force: 130 t Type distance: 520 x 520 mm Dkolqswcncloza Rxel Clamping platen size: 728 x 728 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Machine in very good technical condition Electric machine: high-speed, energy-saving, and very quiet Operating hours: 28,847 in automatic mode Euromap 67 Robot interface Hydraulic core pull x 1 Control system with hot runners x 12 Hardened bimetal injection unit Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Central lubrication Proportional valve on the injection unit for precise injection Built-in sorting flap Complete Priamus system for mold pressure control (available for an additional charge) Dimensions: Weight: 7100 kg Length/Width/Height: 3.98 x 1.88 x 2.11 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2013, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 01000643, total height: 2,680 mm, pressing force: 100 t, total width: 2,580 mm, total length: 4,535 mm, overall weight: 6,600 kg, bending length: 3,000 mm, working length: 3,000 mm, Equipment: safety light barrier, Exceptional machine with 400 hours of use Dslqowg Ammjza Rxekl barely used, like new condition, folding accessories worth 8,000 euros, + Digipro touchscreen for drawing parts.

Condition: used, mileage: 12,345 km, first registration: 11/2000, Year of construction: 2000, Haller X2 .20 m3 garbage box for Cable system Container pick up Zoeller 380.00 = Further information = Djlqzowg A E Asa Rxjkl Please contact Gerrit Haverhoek for more information.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 94120 € 1891.81 € 175 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 5250 mm 1700 mm 2850 mm 12780 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form Dslqzevnv Nxja Rxokl - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, color: blue, overall weight: 15,000 kg, empty load weight: 2,440 kg, loading space width: 2,350 mm, loading space length: 6,500 mm, loading space height: 1,500 mm, Manufacturer: WELPRO Dkjlqzajiik Sge Rxsl Volume: approx. 22.91 cbm Locking according to DIN 30722-1 Roller tarpaulin Grain pusher Internal dimensions approx.: 6500 x 2350 x 1500 mm (LxWxH) Color: gentian blue RAL 5010 Hinged doors with hinged closure Standard mounting bracket 1570 mm 2 units in stock in 93128 Regenstauf Delivery no problem

Condition: used, mileage: 450,000 km, power: 294 kW (399.73 HP), first registration: 05/2009, color: other, axle configuration: 6x4, tire size: 13R22.5, wheelbase: 5,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, Year of construction: 2009, Equipment: ABS, cruise control, trailer coupling, = Additional Options and Accessories = - CD Player - Electric Mirrors - Electric Windows - Spare Key - Power Take-Off - Headlights - Stability Control - Standard Air Conditioning - Visor - Toolbox - Xenon Headlights - Central Locking = Additional Information = Axle Configuration Tire Size: 13R22.5 Brakes: Disc Brakes Front Axle: Steered; Left Tire Profile: 50%; Right Tire Profile: 95%; Suspension: Leaf Spring Rear Axle 1: Dual Tires; Left Tire Profile: 75%; Left Outer Tire Profile: 50%; Right Tire Profile: 75%; Right Outer Tire Profile: 50%; Suspension: Air Suspension Rear Axle 2: Dual Tires; Left Tire Profile: 50%; Left Outer Tire Profile: 10%; Right Tire Profile: 50%; Right outer tire tread: 50%; Suspension: Air suspension Dimensions Dimensions (L x W x H): 1006 x 255 x 350 cm Weight Curb weight: 13,370 kg Payload: 12,630 kg GVW: 26,000 kg Condition Delqzaswgq Npe Rxjkl Damage: None

Condition: excellent (used), Year of construction: 2010, Arburg 820S 4000-2100 / Production line with the Arburg Multilift robot Year of manufacture: December 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Injection pressure: 2000 bar Dosing volume: 1078 cc Clamping unit: Clamping force: 400 t Type distance: 820 x 820 mm Clamping platen size: 1171 x 1171 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 4 Control system with hot runners x 12 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: December 2010 5-axis robot: 3 axes are driven by servo motors (electric); B axis (rotation) Travel paths in axes: X-700, Y-1000, Z-2400 Dkslswcnnzsqza Rxol Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 20,150 kg Length/Width/Height: 7.49 x 2.32 x 2.86 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 171300 € 3374.61 € 400 to 4050 mm Y1 / Y2 / X Achse 365 mm 3400 mm 510 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 1050 mm 154 mm 250 l 37 kW 5750 mm 2110 mm Dolevnv Iujqza Rxokl 3640 mm 27760 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TURKEY optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option