Used Hurlimann H-657 Xa for sale (28,183)

Year of construction: 1991, Condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 Delq Iy Nsi E Hz Tjaecg equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm Dcolq Isfbh Akey Najg

Condition: used, machine/vehicle number: C435T06730G, Year of construction: 2009, load capacity: 1,400 kg, lifting height: 8,000 mm, mast type: triplex, construction height: 3,370 mm, drive type: Elektro, Reach truck Chassis number: C435T06730G Djlq Iyeuhxg Us Naocg Mast type: Triplex Technical condition: good Description: Hyster R1.4 H M0325 Year: 2009 Operating hours: n.L The truck is in visually good and technically good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other machines on site.

Condition: used, Year of construction: 2015, load capacity: 4,500 kg, construction width: 1,400 mm, net weight: 92 kg, Fork carriage Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Dcoleu D S Iyjq Iy Naog Technical condition: very good Description: Quick-change frame with fork carriage plate 1400mm/ FEM3

Year of construction: 1981, Condition: used, Type: BMC 5B Manufacturer: Toshiba Year: 1981 Pallets: 2 pcs 500x500mm pallet changer Tools: 30 pieces in magazine BT50 Speed: 28 - 3150 1/min Travel: X=630mm y=500mm z=500mm table pitch: 1° table load: 800kg Djlqebhn Nme Iy Nascg General: Machine is in a good condition technically o.k. optically i.O.

Year of construction: 2011, Condition: excellent (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Dcolq Iy Nsu Iuzqsaeg Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Year of construction: 2007, Condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS International type : U-HD 500 Dcslq Iy Njlx Avbsajg heating surface approx. : 9 qm capacity : 500 kg/h working pressure max : 13,00 bar increased test pressure : 24,05 bar water contents full approx. : 770 l year of construction : 2007 CE mark : 0036 equipped with Weishaupt combined burner gas&oil type RGL3/1-E, ZMD, 15-500 mbar, fittings for gas supply, switch cabinet with Siemens C7, feed water pump and the existing small and large fittings

Condition: used, Functionality: fully functional, fuel type: gas, Gas forklift HELI CPQD 25 H Year of construction: 2007 Dslq Iyovx Ewte Najcg

Condition: used, machine/vehicle number: H2X392H01457, Year of construction: 2017, operating hours: 5,438 h, load capacity: 2,500 kg, lifting height: 6,400 mm, free lift: 1,800 mm, mast type: triplex, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Treibgas, net weight: 4,040 kg, LPG forklift Fahrgestellnummer: H2X392H01457 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Linde H 25 T No.: M0272 Year of construction: 2017 Operating hours: 5,438 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Dcjlq Iy Nouhxdyoasg Sideshift, 3rd valve, 4th valve,

Condition: new, ✔ Band sawmills ✔ Multi saws ✔ Edge cutters ✔ Milling machines for pallet boards ✔ Wood cutters Why Boldrew? ✅ Over 30 years of experience in the industry ✅ Professionalism and precision ✅ Customer service in Europe, America and Africa We invite you to cooperate! Mobile band sawmill TS-1200 H Mobile band sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision and reliability. Thanks to its mobility and modern hydraulic solutions, the machine will meet the expectations of even the most demanding users. --- Technical data ·Length of the cut log: 100–820 cm Track bed: 6 meters, with an additional 4 meter long hydraulically folding segment ·Diameter of the processed log: up to 950 mm ·Band saw guide wheels: Ø 600 mm Band saw: ·Length: 4800 mm ·Width: 40-50 mm ·Main engine: Briggs & Stratton Vanguard V-Twin 35 HP combustion engine ·Generator: 8 kW to power additional components ·Head lifting system: Double-sided chain drive 16 B ·Feed control: Stepless adjustment for maximum control ·Saw tension: Hydraulic ·Debarker for the first log preparation ·ISP 10 cutting thickness gauge Dslovvw R Tjq Iy Nascg ·Electrically operated roller ·Adjustable Angle supports (load capacity 600 kg each) ·LED lighting, ideal for working in different conditions --- Advanced hydraulic kit The efficient hydraulic system allows easy and quick handling of the logs: ·Hydraulic support arms - stabilization of the log during cutting Log loading - 2 individual cylinders for operator comfort ·Wood leveling - 2 adjustment points ·Log pressure - 2 points for precise clamping ·Chain turner - 2 points, facilitates handling of the log ·Hydraulic motor: 8 kW Briggs & Stratton combustion engine with efficient hydraulic pump Mobility and durability Mobile axle: Double ALKO with brake and height-adjustable drawbar Construction: Solid and resistant to difficult working conditions Transport: Easy thanks to mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Ability to cut large logs with different diameters and lengths 2. Mobility: Perfect for working in sawmills and directly in the field 3. Efficiency: Fast and precise cutting thanks to modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Year of construction: 1968, Condition: used, Peddinghaus hole punch year of construction '68 Hole punch 225 B 100 GJ128 Djlqoccqwlj Iy Najcg special model - large delivery With many accessories

Condition: ready for operation (used), Siemens 6FX1113-8AA00 basic module E Stand H / 00 , used, normal signs of wear, 100% functional, scope of delivery according to photos Delq Iyji Ed Nfe Nascg

Year of construction: 2006, Condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 Dcelqjikvdqs Iy Naeg year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Year of construction: 2001, Condition: used, saw blade diameter 400 mm miter . Kühlung Dcelq Iy Njlug Tueasg weight of the machine ca. 1 t number 4 Stück

Condition: used, machine/vehicle number: H2X391H03043, Year of construction: 2017, operating hours: 4,154 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Fahrgestellnummer: H2X391H03043 Mast type: Triplex Technical condition: very good Front tires type: solid rubber Rear tires type: solid rubber Description: Linde H16T-01 M0356 Year of construction: 2017 Operating hours: 4,154 The machine is visually and technically in very good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site Sideshift, 3rd valve, Dcslsuhxdmjq Iy Naeg

Condition: ready for operation (used), Siemens 6FX1120-6BA01 PLC-CPU E-Stand: H / 05 SN:493 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dcelsp Ehdujq Iy Naeg

Year of construction: 2004, Condition: excellent (used), 1 used quick steaming units ----- Dcelq Iy Nei E Hztjajg manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Condition: used, machine/vehicle number: H2X393H04940, Year of construction: 2017, operating hours: 2,301 h, load capacity: 3,000 kg, lifting height: 4,800 mm, mast type: triplex, construction height: 2,250 mm, fork length: 1,200 mm, drive type: Treibgas, net weight: 4,570 kg, LPG forklift Fahrgestellnummer: H2X393H04940 Delq Iysuhxb Se Naecg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Linde H 30 T No.: R0077 Year of construction: 2017 Operating hours: 2,301 The machine is visually and technically in good condition. Charger on request Special feature is the trailer hitch. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other equipment on site. Sideshift, fork positioner, ZV opening width 1200mm 3rd valve, 4th valve, front work lights, heating, full cab, trailer coupling

Year of construction: 1994, Condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings. Dcolsikvdioq Iy Najg

Year of construction: 2013, Condition: excellent (used), 1 used steam boiler ----- manufacturer : BABCOCK OMNICAL type : Omnibloc capacity max approx. : 3.200 kg/h thermal output approx. : 2,2 mW working pressure : 10,0 bar test pressure : 18,5 bar steam temperature approx. : 184°C water contents full approx. : 7.400 l year of construction : 2013 CE mark : 0091 equipped with Weishaupt gas burner WM-G30/2-A, ZM-LN, 400-3.800 kW, 15-500 mbar, fittings for gas supply, switch cabinet, separate touch panel, feed water pump, eco Dolqjpfayrj Iy Naecg and the existing small and large-scale fittings.

Year of construction: 2000, Condition: good (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, Dcjlq Iy Nepbvh Uoasg and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m². 3 pipes set blind.

Year of construction: 1997, Condition: excellent (used), 1 used quick-steaming unit ----- manufacturer : CERTUSS Dcolqenacfce Iy Nasg type : Universal capacity : 700 kg/h thermal output : 546 kW working pressure : 10 bar water contents approx. : 103 l year of construction : 1997 equipped with Certuss gasburner, fittings for gas supply, switch cabinet built on boiler body, feed water pump and the existing coarse and fine fittings

Year of construction: 2002, Condition: excellent (used), 1 used quick-steaming unit ----- manufacturer : LOOS, Gunzenhausen type : DF 600 capacity : 600 kg/h thermal output : 400 kW working pressure max. : 13 bar Dcslslx Ar Rsq Iy Nasg water contents approx. : 43 l year of construction : 2002 yoc heating coil : 2010 equipped with Weishaupt oil burner WL40 Z-A, 145-570 kW, oil throughput 12-48 kg/h, switch cabinet built on boiler body, feed water pump, and the existing fine and coarse fittings.

Year of construction: 1994, Condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings Dolqjlx Azyo Iy Naecg

Condition: excellent (used), Year of construction: 2008, 1 branded quick steam generator ----- Manufacturer : LOOS, Gunzenhausen Type : DF 300 Capacity : 300 kg/h Heat output : 200 kW Operating overpressure : 31 bar previously operated at : 13 bar Test pressure : 56 bar Dolq Iysqgc S Ds Naocg Water content approx. : 39 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner WG30N / 1-C, ZM-LN, 40-350 kW, switch cabinet, mounted on the boiler body and the existing coarse and fine fittings.