Used Hurlimann H-6130 for sale (24,119)

Condition: used, Year of construction: 2019, operating hours: 917 h, load capacity: 5,000 kg, lifting height: 5,890 mm, free lift: 2,000 mm, mast type: triplex, power: 55 kW (74.78 HP), fork carriage width: 1,350 mm, ground clearance: 200 mm, front tire type: Solidale, front tire size: 300-15, rear tire type: Solidale, rear tire size: 250-15, total length: 5,600 mm, wheelbase: 2,050 mm, engine type: VW CPY, drive type: Diesel, construction width: 1,440 mm, net weight: 7,160 kg, Diesel forklift Linde H 50 D/394 Drive Diesel Year built 2019 Dolovix Eroq Du Hdsut Lifting height (mm) 5,890 Lifting weight (kg) 5,000

Condition: new, Year of construction: 2023, mandrel bending machine ZB 55 H - mandrel length 2000 mm - pipe bender for tubes and profiles up to 54 mm - solid construction for heavy using standard equipment: - modern electromecanic movement - SPS control unit - up to 1000 different programs - electronic measurement of length and angle - manual stop system - hydraulic tube clamping - adjustable hydraulic pressure Dolq Dsd H Rhieu Hdout - three jaw chuck - total power 5,2 KW - bending speed 28 degrees per second - min. bending radius 50 mm, max. bending radius 150 mm - minimum tube diameter 15 mm - 400 Volt 50 Hz 3 ph. - weight 900 kg HS-Code: 8462 2998

Condition: good (used), Year of construction: 2002, operating hours: 28,666 h, Functionality: fully functional, turning length: 587 mm, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, tool mount: 20 mm, For sale is a CNC lathe with 6 driven tool stations of the brand Gildemeister and the type CTX 310 from the year 2002 The machine is in a well-maintained condition and ready for immediate use. Particularly noteworthy are the low spindle hours and the measuring system Technical data Year of construction: 2002 Max spindle speed: 5,000 1/min Speed at constant power: 833-3890 1/min Spindle power: 7.5 KW Chuck diameter: 210 mm Spindle bore: 68.5 mm Center width: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Rotatable diameter: 200 mm Bar passage: 50 mm Travel Z: 450 mm Travel X: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Dujlq Du Hjt A Scyjdet Rapid traverse C1: 100 1/min Torque C1: 112 Nm Feed force Z: 4500 N Feed force X: 4500 N Number of axes 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 1/min Power of driven tools: 4.2 KW Space requirement set up: 4,165 * 1,594*2,377 mm Space required for transportation: 3,190*1,600*1,700 mm Weight: approx. 3,200 kg On request, for an additional charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,990 mm, first registration: 04/2022, suspension: air, tire size: 435/50R19,5, wheelbase: 1,320 mm, Year of construction: 2022, Tyre size: 435/50R19,5 Suspension: air suspension Drive: Wheel GVW: 39.000 kg Make of bodywork: KOGEL S 24-1 Duelsvua Dgjq Du Hdot

Year of construction: 2015, operating hours: 5,568 h, Condition: used, Functionality: fully functional, fuel type: diesel, lifting height: 3,350 mm, mast type: standard, construction height: 2,250 mm, fork length: 1,170 mm, drive type: Diesel, load capacity: 2,500 kg, Diesel forklift Load centre of gravity: 600 Dujlq Du Hsvw E Enedot ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tyres type: super elastic Front tyres size: 225x75-10 Front tyres condition: 80 - 100% Rear tyres type: super elastic Rear tyres size: 225x75-10 Rear tyres condition: 80 - 100% Description: Net price €16,900 negotiable Sale with invoice VAT is shown For sale is a very well-maintained Linde H25 D with standard mast and side shift with tine adjuster Front tyres 90% / rear 90% UVV NEW Operating hours: 5568 Load capacity: 2500 kg lifting height : 3350 mm Fork length : 1170 mm Clearance height / overall height : 2250 mm Year of manufacture : 2015 We look forward to your inquiry Transport can be organized Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, heating, full cabin, CE certificate, interior mirror, joystick, windscreen wiper, LED, seat,

Year of construction: 1989, Condition: used, control Heidenhain TCN 355 8391 Dslq Dsq Awicsu Hdsut

Condition: used, Year of construction: 2018, fuel type: diesel, weight max. in kg 1800 kg stroke 4250 mm fork length 1200 x 120 x40 mm Dslq Du Hst Symlsdout free lift 150 mm construction height 2746 mm

Condition: excellent (used), Year of construction: 1992, 1 used steam boiler Dolq Dujuxr H Eo Hdjut ----- - mounted on a frame - manufacturer : LOOS, Gunzenhausen type : UL heating surface approx. : 80 qm capacity : 3.200 kg/h former allowable working pressure : 10 bar increased test pressure : 18 bar water contents low level approx. : 5.890 l water contents full approx. : 8.020 l year of construction : 1992 equipped with Weishaupt oil burner, separate switch cabinet, feed water pump, and the existing small and large-scale fittings.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, total height: 2,250 mm, total length: 2,000 mm, total width: 3,050 mm, grinding height: 300 mm, For sale is a CNC surface grinding machine of the brand Geibel + Hotz and type FS 415-Z SL The machine is ready for immediate use and fully functional Technical data Year of construction: 1999 Dslq Djuy Tkzsu Hdsut Sanding range: 400*200*300 mm Operating voltage: 400/50 Hz/3 phases Control voltage: 2300/24 Volt Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross-path drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10/max. 30 mm Cone: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: Available Space requirement: 2000*3050*2250 mm On request, transportation and loading can be organized for an extra charge. Europe-wide can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2022, operating hours: 298 h, Condition: used, Functionality: fully functional, fuel type: diesel, lifting height: 4,850 mm, mast type: triplex, construction height: 3,010 mm, fork length: 2,000 mm, drive type: Diesel, load capacity: 8,000 kg, Diesel forklift Dslevw E D Rsq Du Hdout Load centre of gravity: 900 Mast type: Triplex Condition: As good as new Technical condition: New Front tyres type: Superelastic Front tyres size: 8.25-15 Front tyres condition: New Rear tyres type: Superelastic Rear tyres size: 300-15 Rear tyres condition: New Description: Net price €129,000 Negotiable Sale with invoice VAT is shown For sale is a new Linde H80 D EVO with triplex mast, free lift as well as side shift and tine adjuster. StVZO lighting UVV NEW Operating hours: 298 Load capacity: 8000 kg Lifting height: 4850 mm Fork length: 2000 mm Clearance height / overall height: 3010 mm Year of manufacture: 2022 We look forward to your inquiry Transport can be organized Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, soot filter, STVZO, full cabin, full free lift, CE certificate, twin tires, interior mirror, joystick, rotating beacon, windshield wiper, LED, seat,

Condition: used, serial number 711- 00 37 48 total power requirement 11 kW Duslq Du Hsq Awinedjt

Year of construction: 1979, Condition: used, saw blade diameter 450/500 mm cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic Delq Du Hjilfp Nsdjut - hydraulic

Condition: ready for operation (used), Year of construction: 2006, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD Duolq Det E Rxreu Hdet heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Condition: like new (used), Year of construction: 2011, operating hours: 1,013 h, Functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, controller model: 840d SL ShopMill Operate, table width: 560 mm, table length: 1,100 mm, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Dolq Du Hst Sftwsdout Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2020, operating hours: 9,385 h, Condition: used, Functionality: fully functional, lifting height: 3,200 mm, mast type: standard, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Treibgas, load capacity: 2,500 kg, net weight: 3,845 kg, LPG forklift Duolq Du Hsvw E Dwedst Load centre of gravity: 600 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 23x9-10 Front tyres condition: New Rear tyres type: Superelastic Rear tyres size: 23x9-10 Rear tyres condition: New Description: Net price €19,900 negotiable Sale with invoice VAT is shown For sale is a very well-maintained Linde H25 T with standard mast, as well as 3 and 4 control circuits, e.g. for a side shifter with tine adjuster Front tyres NEW / Rear NEW UVV NEW Operating hours: 9385 Load capacity: 2500 kg Lifting height: 3200 mm Fork length: 1200 mm NEW forks Clearance height / overall height: 2200 mm Year of construction: 2020 We look forward to your inquiry Transport can be organized 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 1997, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l Duelet E Rwneq Du Hdot year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Duslq Dot E Rntou Hdst Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2005, 2 used steam boilers ----- - mounted on frame - Manufacturer : VIESSMANN Type : Vitomax 200 HS Heating surface approx. : 11,6 qm Output : 700 kg/h Firing capacity approx. : 520 kW Permissible operating overpressure : 6 bar increased test pressure : 12.2 bar Water content at NW approx. : 1.4 cbm Year of construction : 2005 CE mark : CE0035 equipped with Weishaupt gas burner type WG, ZMD version, switch cabinet, gas control system, feed water pump, boiler platform, Eco and the existing coarse and fine fittings. Duelq Djtt Nabju Hdet

Year of construction: 2003, Condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Junior capacity : 600 kg/h thermal output : 436 kW water content : 42,5 l working pressure : 16 bar test pressure : 57 bar Djlq Djkkcqusu Hdeut CE mark : CE 0035 year of construction : 2003 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body, feed water pump, and the existing fine and coarse fittings.

Year of construction: 2009, Condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS Duelq Dueirfitj Hdot type : Universal capacity : 1.000 kg/h thermal output : 728 kW working pressure : 16 bar test pressure : 57 bar CE mark : CE 0035 year of construction : 2009 equipped with Certuss oil burner, switch cabinet built on boiler body, feed water pump, and the existing fine and coarse fittings.

Year of construction: 1991, Condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l Duelq Dei E Hz Tou Hdst year of construction : 1991 equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Year of construction: 2007, Condition: excellent (used), 1 used steam boiler ----- Delolx Avbjq Du Hdout manufacturer : LOOS International type : U-HD 500 heating surface approx. : 9 qm capacity : 500 kg/h working pressure max : 13,00 bar increased test pressure : 24,05 bar water contents full approx. : 770 l year of construction : 2007 CE mark : 0036 equipped with Weishaupt combined burner gas&oil type RGL3/1-E, ZMD, 15-500 mbar, fittings for gas supply, switch cabinet with Siemens C7, feed water pump and the existing small and large fittings

Year of construction: 2004, Condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr Duelji E Hztjq Du Hdot heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Year of construction: 2006, Condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. Dolsikvdqeq Du Hdjut with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Year of construction: 1994, Condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 Dujlq Du Heikvdisdjt equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings.