Used Hurlimann H-360 for sale (28,761)

Condition: good (used), power: 273 kW (371.18 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 13,956 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL220HJ00002729 Technical information Cgob Ep Dewhfw Rs Dhot Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 35.500 kg Functional Lifting capacity: 10.080 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Tyre brand: Tianli Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,89x3,15x3,71 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: Csb Ep Dsvg At Ue Dhogt - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm -Accessories: see photos Ceb Epjwhbgze D Dhegt -Dimensions: 730/425/H1015 mm -Weight: 71 kg

Condition: good (used), mileage: 234,639 km, power: 220 kW (299.12 HP), first registration: 08/2019, fuel type: diesel, color: silver, axle configuration: 4x2, tire size: 285/70R19,5, fuel: diesel, wheelbase: 5,400 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,490 mm, loading space length: 7,290 mm, loading space height: 2,620 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, trailer coupling, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Short cabin - Tail lift Cjb Eevck Irep D Dhjgt = Remarks = Number of axles: 2, Configuration: 4x2, Own weight: 7140 kg, Gross weight: 15000 kg, Total tank capacity: 125 litres, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 1, Suspension type: Air suspension, Cabin type: Short cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: Silver, Metallic, Engine manufacturer: Mercedes, Engine power: 220 kW (295 Hp), Euro: 6, Gearbox type: Telligent, Gears: 6, Power steering, ABS, ASR, Tail lift, Tail lift design: Tailgate, Tail lift load capacity: 1500 kg, Tail lift manufacturer: B.A.R cargo lift, tail lift material: aluminum, tail lift size: 181 x 252, AIRBAG / ACTIVE BRAKE ASSIST / DIFF. SPER / TAILLIFT / HIGH PERFORMANCE ENGINE BRAKE / AHK = More information = Drivetrain Engine brand: MB Gearbox Gearbox: 6 gears, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; tire profile left: 9 mm; tire profile right: 10 mm; suspension: leaf spring Axle 2: twin tires; tire profile left inside: 12 mm; tire profile left outside: 12 mm; tire profile right inside: 11 mm; tire profile right outside: 11 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 948 x 255 x 380 cm Weights Empty weight: 7,140 kg Payload: 7,860 kg GVW: 15,000 kg Functional Tail lift: B.A.R cargo lift, tailgate, 1500 kg Height of loading area: 114 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2023, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Horisontal stainless steel tank AISI 304. Ceb Ep Djq Daf Ee Dhjgt Newer used - NEW!

Condition: used, Year of construction: 1997, operating hours: 30,251 h, lifting height: 4,440 mm, fuel type: diesel, mast type: duplex, fork length: 1,170 mm, total height: 3,000 mm, total length: 3,100 mm, total width: 1,500 mm, color: other, Empty weight: 7.150 kg Lifting capacity: 4.500 kg Fork dimensions: 1.170 x 1.100 mm - Lifting capacity: 4500kg - Lifting height: 4440mm - Maximum fork width: 1100mm - Number of wheels: 4 Wheels - Overhead clearance: 3000mm - Attachment: Side-shift, 4th valve to fork carriage - Options: License Plate, Verwarming, Full cabin, Air tires, Work lights - Fork length: 1170mm - Free lift: 0mm - Mast: Duplex - Year: 1997 - Documentation available: No - CE mark available: Yes Cjb Ep D Dewg Ai Iehegt - Serial number: 352H02000345 - Operating hours: 30251 - Drive: Diesel - Transport dimensions: 3100mm x 1500mm x 3000mm (l x w x h) - Transport weight [kg]: 7150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 5,243 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL180HEF0008019 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 38 km/h Empty weight: 29.700 kg Functional Lifting capacity: 8.710 kg Cgeb Ep Dswhfwwo Dhet Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,98x3,96x3,58 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition Csb Epowhf Hfo D Dhegt

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Cob Ep D Dswhdzbehegt Machines are currently in production and can be viewed by appointment.

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Cgsb Eowhd Eysp D Dhst Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: B-axis input and display resolution: 0.001° Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Cjb Ep D Dowg Duxjhogt Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Tool breakage detection

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Cgjb Esg Akgtjp D Dhot

Condition: good (used), power: 309 kW (420.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 12,452 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL260HL00001089 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 39.000 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 70 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,47x2,4x3,72 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information Cob Ejwgnzvop D Dhsgt

Condition: new, Axesta Grossenbacher Input 40x24VDC / 50 70 360 SN:9807602063, unused in opened original packaging, 100% functional, scope of delivery as per photos Cgjb Ep Dji D T A He Dhot

Condition: used, Year of construction: 2017, Carrying capacity: 500 kg Number of suction pads: 8 Cgsbjv Ei Sho Ep D Dhot With chain hoist: Yes Mounting flexible: Yes For panels: Yes Horizontal panel transport: Yes Conformity marking: CE mark

Condition: excellent (used), In this offer you will purchase a used "DELL EMC ECS CloudStorage 360 TB RAW " ECS is Dell EMC's industry-leading object storage platform that supports both traditional and next-generation workloads.With the perfect blend of economics and high density, the ECS appliance portfolio provides even more flexibility. Sale Item: 1 x DELL EMC ECS Cloud Storage ES4 360TB with the following equipment: 4x DAE 15 6TB SATA 7.2k HAP (MFG ECS G4) 2x Switch 10GBE 24P HAPW (MFG QTY1 ECS G4) 1x Switch 1GBE 48P HAPW (MFG QTY1 ECS G4) Ceb Esip T Dajp D Dhogt 1x Server 2U 4x Blades 10GBE HAPW (MFG ECS4 G4) 2x 10GBE Optical SFP Rack Assy, Titan 40U, 4 PDU, EMC/ECS Country Kit EU and Korea, 220V; 1U/2U EMC ECS licence solution (software) VIPER Controller EMC ECS EMC Centera Generation4 Replication 2 NODE (Software) Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been functionally tested and is equipped with the latest ECS software. For more information, you can of course contact us personally. Shipping is possible on request! Manufacturer information: Dell EMC ECS ECS is Dell EMC's industry-leading object storage platform that supports both traditional and next-generation workloads. ECS can be deployed as a software-based model or as a ready-to-use appliance. With its unmatched scalability, ease of management, resilience and economics, ECS delivers the answer to modern business needs. Use ECS to develop modern applications, create exabyte-scale archives, drive strategic analytics initiatives, and meet stringent regulatory standards - all at a lower total cost of ownership. Key features: Supports object, file and HDFS (Hadoop Distributed File System) protocols. Provides Storage-as-a-Service capabilities: Multi-tenancy, detailed metering, a self-service portal, metadata search and management, ARM (Advanced Retention Management), integrated billing and more Offers configurations from 60 TB to 8.6 PB in a single rack with scalability to multiple racks Provides geographically distributed data protection with no single point of failure Active-active access across multiple locations to all types of files worldwide All data without guarantee!

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 3600 mm y-travel 920 mm z-travel 820 mm Control Siemens 840 D table surface area 4200 x 900 mm table load capacity - central/maximum 4200 kg tool taper HSK-A63 DIN 69893 spindle turning speed - stepless 20 - 18000 U/min feed speeds - 20000 mm/min rapid travel x/y/z 100 / 60 / 60 m/min spindle motor (100/40% ED) 25/35 kW total power requirement 92 kVA weight of the machine ca. 29,5 t dimensions of the machine ca. 10,00 x 6,50 m Additional information Maintenance condition: Regular maintenance, no maintenance backlog. Very good used condition ! * CNC control Siemens Sinumerik 840 D Powerline with ShopMill * Controlled axes 5 * Controlled swivel milling head (B-axis) +/- 90 deg., 1 deg. indexing * C-axis with CNC-rotary table * 126-station ATC 0 - 6,000 rpm Cgob Epewgarys D Dhst Max. tool diameter (with free neighbouring space) 130 mm Max. tool length 360 mm 6,001 - 10,000 rpm. max. tool diameter 100 mm max. tool length 250 mm 10,001 - 12,000 rpm. max. tool diameter 80 mm max. tool length 250 mm 12,001 - 18,000 rpm. max. tool diameter 50 mm max. tool length 200 mm max. tool weight with automatic tool change 6 kg max. total tool weight in the magazine 180 kg * 5-station Pick-up magazine (additionally installed in the work area) - Max. tool length 450 mm * Chip conveyor * Compact filter system, 900 liters volume * Coolant through spindle 40 bar Without clamping plates, toolholders, etc. Transport dimensions approx. (L x W x H) Machine 7.830 x 3.400 x 3.100 mm Coolant system 2.100 x 1.200 x 2.150 mm Chip conveyor 1.300 x 8.900 x 1.700 mm Working area Travels X-axis 3,600 mm with B-axis travel left 1,316 mm with B-axis travel right 1,399 mm Work table Rigid table Clamping surface 4,200 x 900 mm Distance between T-slots 100 mm Number of T-slots 9 pieces Permissible load of the worktable Rigid table (table centre) 4,200 kg Main drive Drive power 25 KW (100% ED)35 KW (40% ED) Torque 87Nm (100% ED)130Nm (40% ED) Speed Infinitely programmable 20 - 18,000 rpm Speed in set-up mode 20 - 800 rpm

Condition: good (used), power: 275 kW (373.90 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 3,996 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMTPC256JJKK70446 Technical information Track width: 80 cm Empty weight: 41.300 kg Drivetrain AdBlue system: Yes Drive: Track Make of engine: SAA6D114E-6 Cgeb Epjwgnyxj D Dhst Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Emission level: Stage V / Tier IV final Delivery terms: EXW Production country: UK Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), Forkardt F315 J8 H lathe chuck - outer diameter 320mm,used, good condition, 100% working, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ceb Ep D Deulqhmshegt

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cgsb Ep D Dov Ezk Nshet Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC-VSA motor SN:EK366719002017 + ROD 426 360 27S12-03, used, normal signs of use, 100% functional, scope of delivery as per photos Cjb Eei D Siysp D Dhogt

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Cgsb Ep Dowg Smvo Dhjt Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC-VSA motor SN:ELD86133306004 + ROD 426 360 27S12-03, used, normal signs of use, 100% functional, scope of delivery as per photos Cgeb Ep D Doi D Slujhst

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC-VSA motor SN:EK366719002013 + ROD 426 360 27S12-03, used, normal signs of use, 100% functional, scope of delivery as per photos Cgsb Ep Dei D Sivs Dhet

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC-VSA motor SN:EK486703905014 + ROD 426 360 27S12-03, used, normal signs of use, 100% functional, scope of delivery as per photos Cgjbsi D Skte Ep D Dhst