Used Hurlimann H-360 for sale (28,762)

Condition: ready for operation (used), Multistage centrifugal pumps - 5,5 KW 64m3/h, H 31m, 3x piece - 3kw 30m3/h, H 16m 3 pieces - max.16 bar - max. 120 ˋCelsius Cslinrvogqupko Regt Vertical, multistage centrifugal pump with opposite suction and discharge ports (inline design). The wetted parts of the pump are made of grey cast iron (head and foot piece) and stainless steel. The cartridge seal promises high reliability and ease of service. Power is transmitted via a rigid split coupling. The piping connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor

Condition: refurbished (used), Year of construction: 2006, operating hours: 2,220 h, Functionality: fully functional, fuel: electricity, Equipment: second-hand vehicle warranty, TENNANT S12 SWEEPING MACHINE NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS 24V 25A CHARGER NEW AIR FILTER 2006 year of production The mileage of the machine is 2220 hours The new roller brush in combination with the new side brush ensures an excellent sweeping result A high-efficiency dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dust from being swept up. The device after a general, meticulous renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Sweeping width (with side brush): 90 cm Waste tank capacity: 85 L Filter area: 4.5 m² Practical / theoretical capacity: 4650/6820 m²/h Weight (with batteries): 447 kg Noise Level: 72dB(A) Top speed: 6.2 km/h Gradeability: 18% INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS 24V 25A CHARGER NEW AIR FILTER New Roller Brush - PPN 0.7 Bristles New side brush New roller cover rubbers Cgslinrjm Uc Umov Rot THE MOST IMPORTANT FEATURES: The ergonomically designed cockpit as well as the centrally placed operator's seat ensure good visibility of the cleaned surface The Tennant S12 Sweeper is the perfect machine for efficient, economical sweeping of multi-storey car parks, warehouses and production buildings, and outdoor spaces Battery power supply provides high flexibility, enabling operation also in closed places, buildings, warehouses The large working width (900mm) ensures high surface efficiency Very legible and intuitive control panel.

Year of construction: 1993, Condition: excellent (used), 2 pieces centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Delivery rate: 5,5 l/s (19,8m³/h) Cslijibwarjnrv Rjgt delivery head: 214 meters ( 21,4bar) max. temperature: 130°C Seal: mechanical seal with sealing water connection electric motor: VEM driving power: 30 kW speed: 2935 rpm

Condition: used, mileage: 35,000 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 05/2023, next inspection (TÜV): 05/2026, emission class: euro6, color: black, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: A11758 ---- D34 Electric glass sliding/tilting roof, fixed panoramic roof * E07 Hill start assist * E6M MBUX Multimedia System Mid * LG2 LED Intelligent Light System * VQ1 AVANTGARDE * ZH8 V-Class AVANTGARDE EDITION * E1D Digital radio (DAB) * E1E Navigation * E65 Burmester surround sound system * ET4 Active Distance Assist DISTRONIC * EX8 Navigation Plus * EZ6 Parking package with 360 camera * JS1 360 camera * T55 Electric operation for right-hand sliding door * T56 Electric operation for left-hand sliding door * BA3 Active Brake Assist * BH1 HOLD function * C70 Pedestrian protection * C74 Illuminated Mercedes-Benz entrance lettering * CA4 AIRMATIC * CL1 Steering wheel adjustable for tilt and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * CM2 Bumpers and add-on parts painted in body color * D14 Anodized roof rails * E1F Display diagonal 26 cm (10.25?) * E1T Touchpad * E34 Buffer battery for starting process * E4S Smartphone integration package * E70 Lower control panel switch position * E7B Navigation pre-installation * ES2 12 V socket in trunk / load compartment * ES3 12V sockets for rear seat rows right and left * ES9 Media interface cable kit * EX9 3 years free map data updates * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management Celinrsu Azmpov Rsgt * F48 Heater for windshield washer system * F65 Exterior mirrors, automatic folding * F66 Lockable glove compartment * F69 Exterior windshield mirror * F72 Exterior and interior mirrors can be automatically dimmed * FC1 Electronic key in chrome look * FG0 Center console with roller blind * FG9 Clip-on cup holder in rear armrests * FH6 Leather-look instrument panel with decorative stitching * FH9 Ebony wood-effect trim elements, dark anthracite * FP3 Mirror package * FS5 Illuminated mirrors for sun visors * FY1 Anti-theft package * FZ8 Comfort opening and closing with IR remote control * G43 9G-TRONIC * H00 Warm air duct to passenger compartment * H20 Heat-insulating glass all round * HH4 THERMOTRONIC automatic climate control system * HZ0 Electric auxiliary heater * HZ7 Semi-automatic air conditioning, TEMPMATIC in the rear * IL6 Metallic paint * J55 Seat belt warning system for front passenger seat * JA1 Warning lamp for wiper fluid level * JA7 Blind Spot Assist * JA9 Traffic sign assistant * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK5 Instrument cluster with color display * JP1 PRE-SAFE * JP2 Driving assistance package * JW5 Lane Keeping Assist * JW8 ATTENTION ASSIST * JX2 Service interval 40,000 km * KB5 Main tank 70 liters * LA2 Driving light assistant * LB9 Exit lights * LC1 Ambient lighting * LC4 Comfort roof control unit * LC5 Ambient lighting in the exterior mirrors * LC6 Bel. in rear grab handle with reading spotlight * LC7 Lighting for front footwell * LC8 Tailgate ambient lighting * LE1 Adaptive brake light * LG4 LED tail lights, brake lights and indicators * LG8 High beam assistant PLUS * MJ8 ECO start/stop function * MO6 Emission class Euro 6d M/N1 GR. II * MX0 BlueEFFICIENCY package * PY0 Exclusive interior design package * Q50 detachable ball head trailer coupling * QA4 Towing capacity 2500 kg * R1O Light-alloy wheels 7.5Jx18, 5-double-spoke design * RY2 Tire pressure monitoring on VA and HA, wireless * S37 External armrests for individual seats 2nd row of rear seats * SA6 Front passenger airbag * SA8 Seat comfort package * SE4 Lordos

Year of construction: 2024, Condition: new, machine/vehicle number: Alistar AF166, Compact size, high productivity food processing machine: Colinrodwlfkjv Rsgt Cabbage Shredder SC55 is productive, compact size commercial vegetable cutting machine that is intended for shredding, grating, julienne stick cutting, coleslaw cabbage cutting. High productivity 2000-3500 kg/h, high-quality materials as food grade stainless steel AISI 304. Made for small and middle size producing companies. General Features: • Productivity 2000-3500 kg/h; • Disc diameter of 50 cm;; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Can be equipped with wheels and easy transportation; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask; Mainly used by: Vegetable, salad producing and whole selling companies Restaurant and fast food chains Natural Sauerkraut, Kimchi, Salad producers Special request for machine

Condition: ready for operation (used), Grinding machine for sharpening gang saw blades. Cgslisimz S Uenrv Rjt There is also a machine for sharpening circular saw blades (Fig. No.: 35, price 2400), for setting circular saw blades (Fig. No.: 36, price 750) and for rolling gang saw blades (Fig. No.: 37, price 1000).

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, motor speed: 3,000 rpm, type of cooling: air, Diesel generator set with a power output of 6.8kW. The Proton 360 is characterized by Dual Power technology thanks to which the user is able to obtain 80% power on a single-phase socket and 100% power on a three-phase socket. Colstq Upijinrv Rjgt SHORT: Genset type: DUAL, Single-phase, Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) Rated power 230V - 4960 watts Maximum power up to 15 minutes - 5440 watts WEIGHT: Gross weight: 143 kg FUELING: 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-D Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 1 piece (32A), 1 piece (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V), 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, overall weight: 125 kg, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, KARCHER KM 75/40 W Bp SWEEPERS Colieu U Id Nenrv Regt NEW SONNENSCHEIN 12V 55Ah GEL BATTERIES (2x) 2016 production year New cylindrical brush combined with a new side brush provide excellent sweeping effect New protective rubbers around the main roller provide dust-free sweeping High surface efficiency up to 3,375 m²/h Telescopic handle makes it easy to remove the waste container The machine is in perfect condition both visually and technically. The device has undergone a general, meticulous technical renovation Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: battery Drive power (W): 400 Theoretical efficiency (m²/h): 3375 Working width (mm): 550 Working width with 1 side brush (mm): 750 Waste container (l): 40 Climbing ability (%): 12 Working speed (km/h): 4.5 Filter surface area (m²): 1.8 Weight of the device ready for operation (kg): 125 Dimensions (length x width x height) (mm): 1430 x 750 x 1190 INCLUDED: NEW GEL BATTERIES SONNENSCHEIN 12V 55Ah (2x) New roller brush PPL 1.0 (hard) New side brush PPL 1.2 + 0.4 (medium) New roller cover rubbers Waste container

Year of construction: 2009, Condition: excellent (used), ! Price per unit ! Pumps of the CEH series are horizontal, self-priming, gas-carrying side channel pumps in sectional casing design with open impellers and upstream centrifugal stage in a combined system to achieve favorable holding pressure heads (NPSH). Technical data: Flow rate: 1 m³/h Delivery head: 50 m Speed: 1400 1/min Shaft power: 1.2 kW Temperature: 60 °C Celinrvjhurqbe Rogt Shaft seal: Magnetic coupling (with explosion protection) Materials: Stainless steel 1.4408 Motor: Siemens 1.5 Kw EFF Class. 2 (without explosion protection) Voltage: 230/400 Volt 50 Hz Dimensions Length: 770 mm Width: 300 mm Height: 290 mm Weight: approx. 75 kg Suction side connection: DN 40 Connection pressure side: DN 20 Pipes and non-return valves also available. Applications: Pumps from the CEH series with NPSH pre-stage are used when liquids need to be pumped without problems in unfavorable suction-side delivery conditions. They can also be used with inlet heads of less than 0.5 m. The ability to use these pumps in particular for pumping liquids at boiling point has led to a wide range of applications for pumping condensate, distillate, refrigerants and liquefied gases. CEH pumps are used in the chemical industry, the petrochemical industry, the pharmaceutical industry, the plastics and rubber industry, in surface finishing and hardening, in the food and beverage industry and in air conditioning and refrigeration technology. Pumps in the CEH series with a retention stage to ensure the minimum filling quantity in the pump are used especially for pumping liquids under vapor pressure, even from underground tanks.

Condition: ready for operation (used), Year of construction: 2007, Number of bending rolls 3, diameter of bending rolls 520mm, driven bending rolls 3, machine weight 12to Cjljur Tkdeinrv Rjgt

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 130m³/hour freshly compressed concrete Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete) Total Motor Power : 168kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. Cgjlsflz Idoinrv Rst We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 130 m³/h Air Compressor Capacity : 1300 lt/min Aggregate Hopper : 4 Bins:4×30 = 120m³ Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity Aggregate Conveyor Band : 1000 mm * 32000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 750 Tons/hour capacity of Crushing and Screening Plant: - Feeding Bunker (50 m3) -1300x5000mm Double Stage Wobbler Feeder - PDK-150 Primary Impact Crusher - 2000x6000x2 Vibrating Screen - DMK-03 Secondary Impact Crusher - 75 m3 Stock Hoppers - 20 m3 Hopper for Vertical Shaft Impact Crusher - VSI-1000 Vertical Shaft Impact Crusher with open rotor - 2000x6000x3 Horizontal Vibrating Screen - Stock and Feedback Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Cgelinoqzhq Aerv Ret

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, fuel type: electric, color: green, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPER Colinetyvd Rorv Regt NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS RECTIFIER 24V 20A 2014 year of production The new roller brush combined with the new side brushes ensure an excellent sweeping effect A highly efficient dust collection turbine and new protective rubbers around the main brush prevent fine dust and dust from flying after sweeping. The machine has a large waste flap for collecting larger waste. The device has undergone a general, meticulous renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you are buying exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter area (m²): 3.3 Dimensions length x width x height (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready for operation (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS RECTIFIER 24V 20A New roller brush New side brushes New roller protective rubbers Garbage tanks 85l THE MOST IMPORTANT FEATURES: The ergonomically designed cockpit and the centrally located operator's seat ensure good visibility of the surface being cleaned The IPC GANSOW 1250 E sweeper is the perfect machine for effective, economical sweeping of multi-storey parking lots, warehouses, production buildings and outdoor spaces. Battery power ensures high flexibility, enabling work also in closed places, buildings and warehouses The large working width (1200mm) ensures high area efficiency Very clear and intuitive control panel.

Condition: new, Year of construction: 2025, Plant Type : STATIONARY Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 100m³/ hour freshly compressed concrete Mixer Capacity: 3000/2000 lt (2m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Cgjlinreflz H Dov Rjt Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Italian- French-German-Spanish- Arabic-Russian languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 200-350 Tons/hour capacity of Washing and Screening Plant: Cgslsuhpk Reinrv Rot - Riverstone Feeding Bunker - 1300x4000x2 Decks Vibrating Screen - 2000x6000x4 Decks Vibrating Screen with washing system - 1500x4000mm Dewatering screen with Hydrocyclone - Conveyor Belt System - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, MOBILE CONCRETE BATCHING PLANT M100-TWN GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Cjlinrvjflz Hls Rjgt Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from100 to 1000 ton per hour. 200-350 Tons/hour capacity of Crushing and Screening Plant: -35 m3 Rock Feeding Bunker -Vibrating Grizzly Feeder (bypass) -CLK-110 Primary Jaw Crusher -2000 x 6000 mm Vibrating Bypass Screen -CC 300 Cone Crusher 2 units -2200 x 6000 mm Vibrating Screen (4 decks) -2200 x 7000 mm Vibrating Screen (4 decks) -20 m3 Hopper 2 units -1000 mm, 800 mm, 650 mm width Conveyor Belt System -Control Panel and Automation System -Magnetic Magnet FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Cgjlistqdu Djnrv Rst

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! Cjlinjrnkhrsrv Regt *Installation and Operator Training FREE FABO company manufactures and installs high quality stationary type stone crushing and screening plants according to customer requirements. Production capacity and type of used crushers in our stationary type plants differ from100 to 1000 tons per hour. 130-180 TPH Crushing and Screening Plant: - 25 m3 Rock Feeding Bunker - Vibrating Grizzly Feeder (bypass) - Clk-90 Primary Jaw Crusher - 2000x6000 mm 4 decks Vibrating Screen - Dmk-01 Secondary Impact Crusher -Conveyor Belt System -Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels. Cgslinrvot Nf U Ns Rjt

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Cgelinewc Tduorv Ret Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: H2X391V00906, Year of construction: 2019, operating hours: 8,340 h, load capacity: 2,000 kg, lifting height: 3,280 mm, free lift: 1,680 mm, load center: 500 mm, fuel type: gas, mast type: duplex, motor manufacturer: VW, LPG forklift in clean condition, ready for immediate use, and with a valid accident prevention certificate until April 2026. No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Drive type: LPG Load capacity: 2,000 kg Lift height: 3,280 mm Free lift: 1,680 mm Fork length: 1,200 mm Cgelinrowc St Usv Rst Fork carriage width: 1,050 mm Load center: 500 mm Mast type: Duplex Engine and transmission Engine manufacturer: VW Fuel type: LPG engine Transmission: Hydrostatic Tires Tire condition: 100% new Front tire size: 200/50-10 Rear tire size: 18×7-8 Front tire type: SE-Natural (white, non-marking) Rear tire type: SE-Natural (white, non-marking) MACHINE DETAILS Total weight: 3,700 kg Overall length: 2,600 mm Overall height: 2,165 mm Height: 2,165 mm Hours: 8,340 h Color: Red UVV (accident prevention) inspection valid until: 04/2026 EQUIPMENT - Sideshift - 3rd and 4th valves - Pallet forks - Front work lights (2x ASW-LED) - Rear work lights (2x ASW) - Head protection - GRUL - New white tires (SE-natural) - Lighting - Emissions test - 1-pedal operation

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Cslinreu H R Htjv Rjgt Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 0719, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg Colinjdhwzforv Regt

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Cgjlevthdfoinrv Ret

Condition: used, machine/vehicle number: 1109, Mounting cone: MK 6 Cgelisdhwzasnrv Rst Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg