Used Hurlimann H-478 for sale (24,234)

Condition: used, mileage: 601,730 km, power: 157 kW (213.46 HP), first registration: 10/1989, overall weight: 17,600 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 5,280 kg, empty load weight: 12,320 kg, wheelbase: 6,000 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: none, number of seats: 2, Equipment: ABS, bathroom, cabin, parking heater, power assisted steering, seat heater, * German vehicle * Ideal basis for conversion into a sales or trade fair bus * Suitable for all sales purposes, e.g. food, tools, clothing, etc. * Shelving systems on the right and left * Various shelves, counters and drawers * Interior lighting throughout * The vehicle is fully insulated and equipped with 6 insulated roof windows * Furthermore, a diesel auxiliary heater with 60 liter additional tank is installed * Toilet room with WC and washbasin available * Large fresh water tank and waste water tank * Electric water pump * 220-280 volt electrical converter * Power sockets * Flat floor * 2 x bench seat * ISRI driver's comfort seat with air suspension * Seat heating Debu Ugovhpw Njp Isut * Sunblind for windshield * 6 x roof windows with sunblind * Loudspeaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6 cylinder in-line engine OM 447h * Max. gross vehicle weight: 17,600 kg * Unladen weight: 12,320 kg * When selling to tradesmen and for export (non-EU and EU), the German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Pumpex water pump 300m3/h, 7.5kw Djbuevgnvbo Ugp Isut

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 7,493 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Double pedal Technical condition: good Front tires type: Superelastic Front tires size: 27x10-12 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 60 - 80% Description: Handover with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to inquire about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of the entry. Subject to prior sale, changes and errors. Djbu Ugsuh Hrlop Ieut Clamping fork, side shift, fork positioner, Durwen fork positioner with separate side shift 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cabin, full free lift, safety light,

Year of construction: 2013, Condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg Dobefrzlmeu Ugp Isut stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: used, mileage: 234,000 km, power: 81 kW (110.13 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,160 kg, first registration: 09/2009, next inspection (TÜV): 12/2025, color: black, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Additional equipment: Airbag on driver's side, electrically adjustable exterior mirror, 72 Ah battery, tachometer, vehicle with double doors, laminated glass windscreen, heated rear window, body/structure: box, vinyl loading area floor mat, loading area partition with window, height-adjustable steering column (steering wheel), headlight range control, 2.5 liter - 81 kW CRDi KAT engine, rear fog light, radio preparation, 2 speakers, 3200 mm wheelbase, rear disc brake, left-hand sliding door to loading/passenger area, right-hand sliding door to loading/passenger area, front and rear mud flaps, side impact protection, seats in the driver's cab: double passenger seat, traction control, clock (digital) Djbu Ugpovtib Se Ieut Subject to prior sale, errors and changes reserved

Condition: used, Functionality: fully functional, power: 36 kW (48.95 HP), fuel type: diesel, lifting height: 3,070 mm, Year of construction: 2023, construction height: 2,290 mm, engine type: Perkins 403J-E17T, drive type: Diesel, Wheel loader Gearbox: Hydrostatic Speed class: 20 Condition: New Dsbu Uovr Ngregp Iout Technical condition: New Front tires type: pneumatic Front tires condition: New Rear tires type: pneumatic Rear tires condition: New Front work lights, CE certificate, seat, * 4-point hook attachment

Condition: used, mileage: 601,730 km, power: 157 kW (213.46 HP), first registration: 10/1989, fuel type: diesel, number of seats: 2, gearing type: automatic, axle configuration: 4x2, overall weight: 17,600 kg, empty load weight: 12,320 kg, maximum load weight: 5,280 kg, color: blue, wheelbase: 6,000 mm, driver cabin: other, Equipment: ABS, bathroom, cabin, parking heater, power assisted steering, seat heater, * German vehicle * Ideal basis for motorhome conversion * The vehicle is completely insulated and equipped with 6 insulated roof windows * Furthermore, a diesel auxiliary heater with 60 liter additional tank is installed * Toilet room with WC and washbasin available * Large fresh water tank and waste water tank * Electric water pump * 220-280 volt electrical converter * Power sockets * Interior lighting throughout * Flat floor * Various shelves, counters and drawers * 2 x bench seat * ISRI driver's comfort seat with air suspension * Seat heating * Sunblind for windshield * 6 x roof windows with sunblind * Loudspeaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6 cylinder in-line engine OM 447h * Max. gross vehicle weight: 17,600 kg * Unladen weight: 12,320 kg * When selling to tradesmen and for export (non-EU and EU), the German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Dujbu Ugpjvhpwvs Ijt All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 1998, operating hours: 88 h, Condition: excellent (used), Selling water pump, - BBA B156 TW GMC. - 1998 year of construction. Dusbjvgbayju Ugp Iet - 11KW/ 1460 rpm motor. - Worked 88 mth. - Capacity 180 m3/h. - Perfect condition/ like new.

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 8,974 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 23x9-10 NEW Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 23x9-10 NEW Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, heating, STVZO, full cabin, air conditioning, full free lift, safety light, Dobu Ugpouttkys Isut Double bottle holder

Condition: used, Year of construction: 1979, table diameter mm Dusbu Ugoub Al Ujp Ijt workpiece height mm number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Dusbouqfa Isu Ugp Iot Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: new, Year of construction: 2025, table width: 1,700 mm, table length: 3,500 mm, pressing force: 600 t, stroke adjustment: 350 mm, distance table to quill: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • T-channel additional additional plate • 8 Bearing rams • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • WE PRODUCE H TYPES FROM 150 TONS TO 2000 TONS. • COUNTRY OF ORIGIN: Türkiye • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 600 STROKE (MM) 350 REVOLUTION (D/D) 15-25 TABLE-RAM RANGE (MM) 1100 TABLE DIMENSIONS (MM) 1700X3500 MINIMUM MOLD HEIGHT (MM) 600 REGULATION DISTANCE (MM) 150 SIDE WINDOW WIDTH (MM) 1100 MOTOR POWER (KW) 55 WEIGHT (KG) 105000 MACHINE DIMENSIONS (MM) 6000X5000X2750 Duebuovtxc Se Ugp Ijt SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO YOUR REQUESTS

Condition: used, mileage: 601,730 km, power: 157 kW (213.46 HP), first registration: 10/1989, overall weight: 17,600 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 5,280 kg, empty load weight: 12,320 kg, wheelbase: 6,000 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: none, number of seats: 2, Equipment: ABS, bathroom, cabin, parking heater, power assisted steering, seat heater, * German vehicle * Ideal basis for motorhome conversion * The vehicle is completely insulated and equipped with 6 insulated roof windows * Furthermore, a diesel auxiliary heater with 60 liter additional tank is installed * Toilet room with WC and washbasin available * Large fresh water tank and waste water tank * Electric water pump * 220-280 volt electrical converter * Power sockets * Interior lighting throughout * Flat floor * Various shelves, counters and drawers * 2 x bench seat * ISRI driver's comfort seat with air suspension * Seat heating * Sunblind for windshield * 6 x roof windows with sunblind * Loudspeaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6 cylinder in-line engine OM 447h * Max. gross vehicle weight: 17,600 kg * Unladen weight: 12,320 kg * When selling to tradesmen and for export (non-EU and EU), the German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Dusbusvhpw As Ugp Iot You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 7,207 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, LPG forklift Duebu Ueuttktogp Iet Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 23x9-10 Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 40 - 60% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, heating, STVZO, full cabin, air conditioning, full free lift, safety light, Double bottle holder

Condition: used, Year of construction: 1975, table diameter mm workpiece height mm number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t Dobusub Al Is Ugp Iout dimensions of the machine ca. m

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Dujbjuqd I Reu Ugp Iot Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton Standard configuration The press has a sideways extending table plate.

Condition: new, Year of construction: 2025, table width: 1,500 mm, table length: 3,000 mm, pressing force: 500 t, stroke adjustment: 300 mm, distance table to quill: 900 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • T-channel additional additional plate • 8 Bearing rams Dobujvtw U He Ugp Iout • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • WE PRODUCE H TYPES FROM 150 TONS TO 2000 TONS. • COUNTRY OF ORIGIN: Türkiye • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 500 STROKE (MM) 300 REVOLUTION (D/D) 20-30 TABLE-RAM RANGE (MM) 900 TABLE DIMENSIONS (MM) 1500X3000 MINIMUM MOLD HEIGHT (MM) 500 REGULATION DISTANCE (MM) 100 SIDE WINDOW WIDTH (MM) 1000 MOTOR POWER (KW) 55 WEIGHT (KG) 75000 MACHINE DIMENSIONS (MM) SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO YOUR REQUESTS

Condition: used, Functionality: fully functional, Year of construction: 2008, operating hours: 14,955 h, load capacity: 1,600 kg, lifting height: 3,150 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: Double pedal Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 18x7-8 Front tires condition: 80 - 100% Rear tires type: Superelastic Djbueu D Raze Ugp Isut Rear tires size: 18x7-8 Rear tires condition: 60 - 80% Description: Handed over with new FEM 4.004 test including test book, major maintenance & gas system NEW If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to inquire about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde equipment – even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, integrated sideshift 3rd valve, front work light, full free lift,

Condition: used, Year of construction: 1974, table diameter mm workpiece height mm number of wheels 2 Dujbu Ugpoub Alzs Iot total power requirement 8 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 1976, table diameter mm Dujbu Ugoub Alujp Ist workpiece height mm number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Duobu Ust Hxagogp Ist Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm Djbu Ust Hw R Regp Iout z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW Dobu Ugjt Hw Dwep Ieut weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 min. module total power requirement 10 kW Dusbst Hwwqou Ugp Ijt weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Dsbu Uet Hwqqjgp Iout Please let us know what you need.