Used International 1066 for sale (9,396)

Condition: like new (used), Year of construction: 2023, operating hours: 52 h, lifting height: 3,600 mm, fuel type: electric, mast type: duplex, mileage: 52 km, lifting capacity: 1,200 kg, net weight: 685 kg, This electric stacker from the Dutchlift brand comes from 2023 and is as good as new;Capacity 1,200 kg;Lifting height 3,600 mm;Hours only 52!!Drive-through height xxx;Equipped with a battery with INTERNAL chargerVideo to follow Csb Eswg Dw He Iihgsgt

Condition: excellent (used), Year of construction: 2018, operating hours: 6,373 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, LAGUN MM6 Traveling Column Milling Machine Current Specifications: - Status: Used Machine - Year of Manufacture: 2018 - Condition: Very Good - Machine Hours: 6,373 Hours (Program Run) Control: - Heidenhain iTNC 530 Linear Axis Travels: - X-Axis: 6,000 mm - Y-Axis: 1,300 mm - Z-Axis: 2,000 mm Machine Table/Plate Area: - Table Size: 7,000 mm x 2,000 mm - T-Slots: 8 x 28 mm - Slot Spacing: 250 mm Basic Technical Specifications: - Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - X-Axis Drive: Rack and Pinion Master-slave drive - Feed rate X/Y/Z: 20,000 mm/min - Rapid traverse X/Y/Z: 20,000 mm/min Equipment: Milling head: - Automatic milling head with two swivel planes and 1° indexing Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - Tool holder SK50 - DIN 69871A - BIG PLUS - Tool changer: 60 magazine positions Horizontal and vertical tool changing, max. tool length 500 mm, max. tool diameter 250 mm, max. tool weight 20 kg Compressed air, coolant, and chip management - 20 bar internal coolant high-pressure pump, controllable via potentiometer - Internal compressed air through the spindle - Automatic hinged chip conveyor Longitudinal direction - Additional automatic hinged-belt chip conveyor in the transverse direction Other features SIEMENS main spindle motor HEIDENHAIN axis servomotors HEIDENHAIN HR 510 handwheel Cob Ejwhfi Tj Iihgegt HEIDENHAIN linear scales in all axes Sturdy machine structure made of cast iron GG30 55 mm linear guides 2-stage ZF gearbox Electronic heat compensation on the Y-axis Hydraulic counterbalance on the Z-axis Automatic central lubrication Coolant system Control cabinet cooling Work lamp Operating manual in German

Condition: used, mileage: 86,000 km, Year of construction: 2018, Serial number: ZCFA775F80267xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19351 Specifications: - Km: Approx. 86,000 - Gear: Automatic - Euro 6 - Engine brake (replaced) - 4x2 - Side door - Good tires - 15 pallet cabinets - Norka box - Inside length: Approx. 6.05 m - Internal width: 2.47 m - Internal height: 2.34 m - Zepro liftlimb - 1500 kg - 207 Hp - 3 seats - Radio/CD - Climate/AC - Reversing camera Cgjb E Iihovg Aazsgst - Ready for delivery Description: Iveco 75E Cabinet van from 2018. The truck has only traveled 86,000 km! Ready for delivery. Km: 86000 HK: 207 Technical approved: Yes EU-approved until: 31.10.2025 Own weight: 4850 Total Weight: 7500 Payload: 2575 Width: 255 Length: 790 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2007, operating hours: 9,572 h, lifting height: 3,450 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, total height: 2,150 mm, total length: 1,950 mm, total width: 1,150 mm, color: other, Empty weight: 3.004 kg Lifting capacity: 1.600 kg Fork dimensions: 1.200 x 940 mm Cobowg Ai Uj E Iihgogt - Lifting capacity: 1600kg - Lifting height: 3450mm - Maximum fork width: 940mm - Number of wheels: 3 Wheels - Overhead clearance: 2150mm - Attachment: Fork positioner, Side-shift - Options: Work lights, Joystick, Free-lift - Fork length: 1200mm - Free lift: 1600mm - Mast: Duplex - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 516211010665 - Operating hours: 9572 - Battery voltage: 48V - Brand/Type: Still - Capacity: 625Ah - Battery year of construction: 2018 - Inspection valid until: 06.2025 - Drive: Elektric - Transport dimensions: 1950mm x 1150mm x 2150mm (l x w x h) - Transport weight [kg]: 3004kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: ready for operation (used), Hereby we offer a unique Italian ice cream machine from lady B trittico. Works on 220v normal plug connection and on water ideal to take with you on a trip or camping! The Bravo Lady B is a compact pasteurization and cooling machine, specially developed for smaller companies such as restaurants, bakeries or ice cream parlors. It combines two essential processes: 1. Pasteurization in the upper vertical vessel, with an adjustable temperature of +65°C or +85°C, depending on the desired pasteurization process. 2. Cooling in the lower horizontal cylinder, in which the mixture is quickly cooled to the desired temperature. A special feature is the patented system with which the hot mixture is transferred internally - without contact with the outside air - from the pasteurization vessel to the cooling cylinder. This guarantees maximum hygiene and enables efficient production. • Maximum filling quantity: up to 2 liters • Power supply: 230 volts, 3.2 kW • Connection system: ready to plug in • Cooling system: water cooling can be connected to a normal tap • Weight: 95 kg • Dimensions: 63 x 36 x 59 cm Maintenance and parts are still available from lobbia refrigeration technology Carpigiani Telme Taylor Kalte rudi Bravo trittico ice cream machines pasteurization pasteurization Cgsb E Iihowgw Tbsgjt

Condition: excellent (used), Functionality: fully functional, mileage: 92,926 km, power: 265 kW (360.30 HP), first registration: 08/2017, overall weight: 26,000 kg, axle configuration: 6x2, maximum load weight: 9,950 kg, empty load weight: 16,050 kg, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, hydraulics, Mercedes Benz Antos 2536 Side loader Inch SLF XL 28 - Manufacturer: Mercedes-Benz - Type: Antos 2536 - First registration: 08/2017 - Kilometers: 92.926km - Unladen weight: 16.050kg - Payload: 9.950kg - Gross vehicle weight: 26,000kg - Power: 265kw/360PS - Lane keeping assistant - Right-hand drive - Automatic air conditioning - Adblue - 6x2 - Inch side loader (right) - Type: SLF XL 28 - Operating hours: 9764h - With integrated dumping Cob E Iisvdc Uyohgsgt - Type: Zöller FLEX 1100 - Tiltable emptying container - Telescopic emptying mechanism - Vertically and horizontally adjustable - Internal and external operation - Euro 6 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2995 mm Measurements depth 5425 mm Measurements height 2955 mm Machine weight 16500 kg Control Unit Model OSP-P300SA Brand OKUMA Main Drive Number of spindles 1 Spindle speed range 4200 rpm Spindle motor power 22 kw Spindle bore ø91 mm Number of axis 6 Movement X-Axis Movement 645 mm Y-Axis Movement 250 mm Z-Axis Movement 1600 mm W-Axis Movement 1594 mm B-Axis Movement 240° C-Axis Movement 360° 1-AXIS Movement -30 - 210 2-AXIS Movement 360 Workpiece Workpiece drm 650 mm Workpiece X 1500 mm Turret Number of turrets 1 Rotating tools Yes Media Internal cooling Yes Additional Equipment Capto C6 tool system for H1 turret Internal coolant supply for rotating tools, pump with pressure max 20 bar including bag filter, external cooling of tool spindle, pump with pressure max 3 bar Tool magazine with 80 pockets External air supply and through the tool spindle for turning holders and rotating tools Hinge belt tensioner Interlit ISF Drum trough filter TMF 300 with clean tank 980 Workpiece gripper programmable, for workpiece size ø 70 x 150 mm 80 tool positions Spindle front bearing diameter 140mm / Spindle bore diameter 91mm Counter spindle 420 Nm; 5000 1/minSpindle front bearing diameter 120mm Csb E Iihewhgt Tjgjgt This 6-axis Okuma Multus U3000 1SW 1500 was manufactured in 2023. A vertical machining center featuring a swing over saddle of ø650 mm, it can handle a maximum machining diameter and length of 650mm and 1500mm, respectively. It boasts extensive travels with X: 645m, Z: 1600mm, Y: 250mm, W: 1594mm, and a C-axis of 360 degrees. Ideal for complex machining tasks, the Okuma Multus U3000 1SW 1500 machine we have for sale. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2014, Functionality: fully functional, power: 7.5 kW (10.20 HP), ABB Motor 7,5 kw Cebswg Alvo E Iihgsgt Stainlesssteel housing Type : ETACHROM BC 32-200/752 C11 Diameter 196 MM Q 31.5 M3/hour H 51.2 M 2930 RPM Weight appr 50 kg We have 6 pumps of this type available but different YOM’s : 2014 - 2002 -2008 Pumps are new from a surplus stock and have never been used.

Condition: used, Year of construction: 2010, Serial number: YF904UPPRA300xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18631 Specifications: - 2010 model - 3 axle - Disc brakes - Lift on 1 axle - Turn on 3 axles - Internal width in cabinet: 2,502 m - Internal Length in cabinet: 13,462 m - Internal height in cabinet: 2,799 m - Heating in box Cobovg Atzj E Iihgsgt - Ready for delivery Description: There is lift on 1 axle and turn on 3 axles. There is heat in the box and full side opening. Some repair cost must be taken into account. Ready for delivery Technical approved: no EU-approved until: 20.08.2024 Own weight: 9380 Total Weight: 39000 Payload: 29620 Width: 260 Length: 1386

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (ording to the manufacturer - without guarantee!) Ceb E Iied Ih Htehgegt

Condition: good (used), Year of construction: 2014, operating hours: 33,703 h, Serial no. 200167, control, make Siemens, type 840 Dsl (index C200-4D SL), bar capacity 40 mm, 6 work spindles, 10 slide units with X/Z NC axis, 2 synchronous spindles (swivel axis and Z axis NC controlled in positions 5.2 and 6.1), 2x three-jaw chucks Röhm KFD-HS 110, 1x boring device for three-jaw chuck, rear machining device on L 6.2, 1 set of driven tool carriers, bundle loader, make IEMCA, type SIR MS40F, model 33, year 2014, serial no. 02143 MB03, with tapping unit and minimum quantity lubrication, 6 material slides/rotary sleeves for D18 mm, 2 sets of internal clamping sleeves D18/D32 mm, drill breakage detection, coolant system, oil mist extraction, Büchel, CO2 extinguishing system, Kraft and Bauer, Cgeb E Iiswg E Hpohget Operating hours: 33,703

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount Csb E Iiewfdzcshgsgt - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3102 mm Measurements depth 1496 mm Measurements height 2538 mm Machine weight 2780 kg Control Unit Model CNC-B00 Brand BROTHER Main Drive Spindle speed range 16 - 16000 rpm Spindle motor power 6.0/11 KW (continuous/10 min) Tool taper ISO 30 Number of axis 5 Movement X-Axis Movement 700 Y-Axis Movement 450 Z-Axis Movement 410 Table Outer length 650 mm Outer width 850 mm Table load 200 kg Cgob Eswgqbfe Iihgot Additional Equipment Internal Cooling: Yes (70 bar Through-Spindle Coolant) Cooling Pressure: 70 bar Air Supply: 0.4-0.6 MPa, 180 l/min Coolant Tank Capacity: 250 L This 5-axis Brother TC-22B-O vertical machining center was manufactured in 2007. It features a high-speed spindle capable of 16,000 rpm and a robust 70 bar through-spindle coolant system. The machine includes an automatic tool changer with 27+1 tool capacity, enhancing productivity and efficiency. The Brother CNC-B00 control unit ensures precise 5-axis control, table is 1 axis. For more information about this vertical machining center, please reach out to us. Application Types Milling

Condition: ready for operation (used), Type: SVRM 4R - Lineair 4 rollen afzonderlijk hydraulisch aangedreven = geen slip, speciaal voor conisch walsen 4 geharde rollen 6 digitale uitlezingen Cjb E Iihowgfy Nogogt conische buiging, kleinste diameter van de kegel is 1100 mm met de bovenrol kunt u zowel dunne als dikke platen verwerken (hydraulische bombering van de bovenrol) maximale snelheid: 7,5 m/min (variabele hydraulische snelheid) Machine met hoge nauwkeurigheid omdat er gebruik wordt gemaakt van lineaire geleidingen voor de zijrollen. Dit betekent dat de zijrollen op geen enkele manier kunnen doorbuigen! (nieuwe machines worden vanwege de hoge kosten niet meer met lineaire geleidingen geproduceerd, in plaats daarvan worden planetaire geleidingen gebruikt, die van mindere kwaliteit zijn) De machine is uitgerust met een backload-functie een kantelcilinder die verbonden is met de bovenste rol; hiermee kan de operator een opwaartse of neerwaartse belasting op de bovenste rol uitoefenen om doorbuiging van de bovenste rol tegen te gaan = bombering van de bovenste rol een ongelooflijk zeldzame functie! De machine is uitgerust met een schokdempersysteem dat handig is om een gewalst werkstuk na het lassen te kalibreren. Dankzij dit schokdempersysteem kan de machine de naad die na het lassen ontstaat, opvangen. Bij het walsen van het onderdeel en het passeren van de naad tussen de boven- en onderrol, worden de schokken niet overgebracht op de lagers en wordt de machine niet overbelast. Een andere unieke eigenschap van deze buigrol is de verhoogde capaciteit voor voorbuigen. Hiervoor moet u de plaatdikte vermenigvuldigen met 1,8. Bijvoorbeeld, een plaat met een dikte van 40 mm x 1,8 = 72 mm. Standaard moet u vermenigvuldigen met 3, voor een plaat van 40 mm komt dit neer op 120 mm. Tijdens het walsproces kunnen alle andere hydraulische bewegingen gelijktijdig worden uitgevoerd. 2 hydraulische plaatondersteuningssystemen (links en rechts) voor het walsen van werkstukken met grote diameter hydraulische verticale bovensteun ter ondersteuning van het plaatwerk tijdens het walsen, maximale diameter van het werkstuk met deze steun is 6300 mm

Condition: used, Year of construction: 2014, Serial number: WKESZ0000061xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19001 Specifications: - 2014 model Cgeb E Isvgy D Doihgot - Air suspension - Tires (see pictures) - Internal length: approx. 1,361 cm - Internal height: approx. 261 cm - Internal width: approx. 247 cm - Net weight: 8,500 kg - 2000 kg Zepro lift Description: 2-axle krone cabinet semi from 2014. It is equipped with a Zepro lift with a capacity of 2000 kg. Eu-approved and ready to be put into operation. can be delivered within a short time. Technical approved: Yes EU-approved until: 28.06.2025 Own weight: 8500 Total Weight: 32000 Payload: 23500 Width: 255 Length: 1386

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 21 mm/s, table width: 120 mm, retraction speed: 200 mm/s, controller manufacturer: Cadman-B Touch, power: 42 kW (57.10 HP), net weight: 15,000 kg, passage width: 2,600 mm, additional equipment features: yes, 9 assen: Y1 / Y2 / X / R / X#39; / Z1 / Z2 / T1 / V Easy Form lasermeetsysteem Vergrote opening en vergrote slag CNC gestuurde buighulp Wila boven- en onder hydraulische klemming Wila gereedschapsstation Lasersafe-beveiliging Capacity: 220 ton x 3100 mm Backgauge: CNC Max stroke: 400 mm - option Max distance between table -- ram: 600 mm - option Cgsb Esv Rwbze Iihgot Locking speed: 120 mm/sec

Condition: used, Year of construction: 2017, Serial number: VFKFKSRS4GBXXxxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18959 Specifications: - 1 axle - Forced control - Lift - Good tires - Air suspension - Internal length: 11.2 m - Internal width: 2.5 m - Internal height: 2.7 m Cgeb E Iovgy Szjihgot - 27 podium places - Ready for delivery Description: 1 axle Citysemi from 2017. Coercive control from the kingpin. Ready for delivery. Technical approved: Yes EU-approved until: 01.09.2025 Own weight: 6700 Total Weight: 27000 Payload: 20300 Width: 255 Length: 1137,9

Condition: ready for operation (used), lifting height: 18,000 mm, net weight: 115,000 kg, Portaalkraan met SWF-takel 70 ton (hoofdtakel) en 5 ton (secundaire takel) Type kabel: SWF NF28A4XEP66DT1S Alle beweging frequentiegestuurd Cgsbjwgfzae E Iihgst 30 meter hijskabel hartafstand wielen: 25 meter 4 achterwielwagens met 8 wielen kraansnelheid: 6 m/min hijssnelheid: 6 m/min hefsnelheid: 6m/min gebruiksklasse: A hefklasse: A Totaalgewicht: 115 ton Kind of: portal crane Capacity: 70 + 5 ton Span: 25 meter Tackle speed: 6 m/min Rotationspeed: 6 m/min Displacementspeed: 6 m/min

Condition: used, mileage: 196,000 km, Year of construction: 2018, Serial number: YS2G4X2000215xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19596 Specifications: - Mileage: 196,000 - Transmission: Automatic - Suspension: Full air - Engine brake - Euro 6 - Okay tires - Full Side Opening - Bus Building Cabinet - Zepro lift, 2000 kg - Remote control - Internal length: 7.6 m - Internal width: 2.5 m - Internal height: Approx. 2.69 m - 320 HP - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Services taken at Team Verksted Description: Scania G320 Box truck from 2018. Bus building cabinet with full side opening. EU approved and ready for delivery. Inverter in the cabinet is not working. Km: 196000 HK: 319 Cjb E Ijvyd U Teihgogt Technical approved: Yes EU-approved until: 27.09.2025 Own weight: 10790 Total Weight: 21000 Payload: 10135 Width: 260 Length: 1010 Euro: 6 Gearbox: Automatic

Condition: ready for operation (used), total length: 8,650 mm, total width: 2,550 mm, total height: 3,100 mm, Maximale draaicirkeldiameter: 1100 mm min. draaicirkeldiameter: 600 mm afstand tussen de centra: 900 1680 mm Cgobowgfzmo E Iihget snelheid: 0,83 31,6 tpm hoofdmotor: 45 kW totaalgewicht: 55 ton treinwiel draaibank - Portal radsatzdrehmaschine - portal wielset draaibank - Портальный колесотокарный станок модели

Condition: used, mileage: 345,000 km, Year of construction: 2015, Serial number: WDB9630201L92xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17172 Specifications: - Km: Approx. 345,000 - Gear: Automatic - Full air suspension - Retarder - Euro 6 - 6x2 - Good tires - Zepro lift, 2500 kg - Remote control - Cabinet: Chereau - Carrier cooling/freezer unit - Partition wall all the way - Inside length: Approx. 8.62 m - Internal height: Approx. 2.69 m - Internal width: Approx. 2.5 m - Booms - Partition can be attached so that there is room for 6 pallets - Tool cabinet - Bed - Refrigerator - Radio/CD - Climate/AC - Service agreement until 2022 - Services have been taken at the workshop after this - Ready for delivery Description: 2015 Mercedes truck with full side opening. Partition wall all the way and barriers. Space for 6 pallets in front. The unit has recently been serviced added a lot of costs. The truck is Eu-approved and ready for delivery. Chiller/freezer unit. Km: 345000 HK: 509 Cgjb E Iievg Rckehget Technical approved: Yes EU-approved until: 14.08.2025 Own weight: 15020 Total Weight: 27000 Payload: 11905 Width: 260 Length: 1102 Kw: 375 Euro: 6 Gearbox: Automatic

Condition: ready for operation (used), total length: 5,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, total depth: 3,500 mm, Type: HS 3001.20P High definition Hypertherm plasma source Extraction in the table cap mild steel: 38 mm Csb E Iihjwgfy Asgsgt cap stainless steel: 25 mm cap alu: 25 mm Plasmasource: Hypertherm HPR130xd Read-out / Control: iMSNC 500

Condition: used, Field of application: Internal logistics Please contact ATS Norway AS for more information Please provide reference number upon request: 19266 Specifications: - Weight: approx. 1390 kg - Model: P-12SS - Max lift height: 450 cm - Lifting capacity: approx. 1200 kg - Ready for delivery. Description: Owner says it works. Some repair cost must be taken into account. It has a height of 4.5 meters. Can be delivered within a short time. Cgob E Iiovg Ah Sohget Total Weight: 1390

Condition: used, mileage: 393,000 km, Year of construction: 2019, Serial number: YS2R6X2000216xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18911 Ceb E Iovg Aauoihgjgt Specifications truck: - 2019 model - Km: approx. 393,000 - Gear: Automatic - Tires (see pictures) - Retarder - Back tip - Hydraulic side and roof - Vang superconstruction - Euro 6 - Length: 904 cm - Width: 255 cm - Wheelbase: 435/135 cm - Net weight: 12,680 kg - Inside length: approx. 649 cm - Internal height: approx. 278 cm - Internal width: approx. 249 cm - 6x2 - 500 hp - Trailer hitch - Extra lights - Tool box - Radio/cd - Climate/ac Specifications trailer: - 2007 model - Tires (see pictures - Length: 1,121 cm - Width: 254 cm - Wheelbase: 131/419 cm - Net weight: 8500 kg - Tool box Description: 2019 Scania R500 chip truck for sale with Vang trailer from 2007. The Vang trailer needs some maintenance. Services are followed at Scania. Ready for delivery. Km: 393000 HK: 500 Technical approved: Yes EU-approved until: 23.10.2025 Own weight: 12680 Total Weight: 28000 Payload: 15245 Width: 255 Length: 904 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2017, Serial number: W09STTM3NHEN1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18975 Specifications: - 2017 model - 3 axle - Turn on 3 axles - Hydraulic kj rebruer - Extraction at 5.5 metres - Internal length on 1 stage: 4,413 m - Internal length p 2 stage: 8,887 m - Total internal length: 13,281 m - Internal width: 2,511 m - Tires (see pictures) - Light - Cupboard space - Ready for delivery Description: 2017 HRD 3 axle machine trailer for sale. Everything works as it should according to the previous owner. There is a turn on 3 axles and an extension of 5.5 metres. Ready for delivery Technical approved: Yes EU-approved until: 08.01.2026 Own weight: 11940 Total Weight: 52900 Payload: 40960 Width: 255 Cjb Ejvgyfze Iihgegt Length: 1375