Used Mc Cormick Mtx 200 for sale (43,567)

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm Celqxctjfgwv Tezjgt -Weight: 1.8 kg

Condition: used, thickness of jaw 200 mm weight 106 kg distance of clamping jaw max. 195/382 mm Colqxctsrtciiszogt dimensions of the machine ca. 870/1230 x 200 x 170 mm Note: without crank !

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Celqxsd Amwiectzegt Weight: 125 kg good condition

Condition: excellent (used), Year of construction: 2004, clamping force: 2 kN, screw diameter: 65 mm, BILLION 200 T injection molding machine Celqxctsu Iy D Dszjgt Reference : Hercule H1300/200 Year : 2004 Control type: DIXIT II Injection screw diameter: 65 mm 8 Mould heating zones 2 hydraulic cores 1 Pneumatic core 1 Blowgun

Condition: good (used), Good, used condition Few operating hours Motor: 11 kW Throughput up to a maximum of 200 kg / h Briquette: 150x60 mm Cgolqxjt Hxudoctzst

Condition: like new (used), Year of construction: 2017, Functionality: unexamined, total length: 890 mm, total width: 580 mm, total height: 352 mm, The MiR200 is an autonomous mobile robot (AMR) from Mobile Industrial Robots that is designed to transport loads of up to 200 kg. Incl. YJ LINK add-on module for circuit board magazines and charging station. Dimensions and weight: Cjlqxctjvt Elaozogt Length: 890 mm Width: 580 mm Height: 352 mm Ground clearance: 50 mm Weight (without load): 70 kg Colour: RAL 7011 Iron grey Payloads: Robot payload: 200 kg (maximum on a 5% gradient) Towing capacity: 500 kg (with MiRHook 200) Speed and performance factors: Range / maximum speed: 10 hours or 15 km Forward: 1.1 m/s (4 km/h) Backward: 0.3 m/s (1 km/h) Turning circle: 520 mm (around robot centre) Positioning accuracy: +/-50 mm to position +/-10 mm to docking mark Overcome tolerance for gaps and thresholds: 20 mm Product design lifetime: 5 Years Minimum width for corridors: 950 mm Space requirements and turning circle: Turning diameter at an obstacle/wall: Without load: 1.3 m Full load: 1.3 m (normal space requirements) Without load: 1.2 m Full load: 1.1 m (minimized space requirements) Power supply: Battery: Li-NMC, 24 V, 40 Ah External charger: Input voltage: 100-230 V AC, 50-60 Hz Output voltage: 24 V, max. 15 A Charging time: With cable: Up to 4.5 hours (0-80%: 3 hours) With charging station: Up to 3 hours (0-80%: 2 hours) Charging options: MiRCharge 24V, Cable Charger Environment: Ambient temperature range: +5 °C to +40 °C (humidity: 10-95%, not condensing) Protection class: IP20 Certifications: ESD certified, Cleanroom certified, ESD tested Noise level: 60-64 dBA (depending on floor conditions) Environment: For indoor use only Safety standards and approvals: Certifications: CE, EN1525, ANSI B56.5, ISO13849-1, EN61000-6-2 & EN61.000-6-4 Communication: WiFi: Dual band wireless (AC/G/N/B) Inputs and outputs: USB and Ethernet Bluetooth 4.0 LE: Range 10-20 m Sensors: SICK safety laser scanner: S300 (front and rear) 360° optical protection: Around the robot 3D camera: Intel RealSense™ (detection of objects in the travel path 50-1800 mm above the ground) Ultrasonic sensors: 4 pieces Attachment module: Max. height from the ground: 1800 mm Center of gravity: Less than 900 mm above the ground

Condition: used, Gear motor, electric motor, electric gear motor Cgjlqxcteckbg Tjzjt -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg

Condition: good (used), Internal article no.: 24080 Cgjlqsuxbwgoxctzot Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 Cgelqjd D Dh Aexctzst 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece

Condition: refurbished (used), Year of construction: 2019, operating hours: 340 h, Functionality: fully functional, cutting length (max.): 3,400 mm, cutting width (max.): 1,400 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, cutting height with scoring (max.): 155 mm, saw blade diameter: 450 mm, height adjustment type: electric, overall weight: 1,150 kg, extraction nozzle diameter: 120 mm, table height: 900 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, type of input current: three-phase, pivoting range: 46 °, power: 7.5 kW (10.20 HP), Equipment: motor brake, scorer, Technical data: ===== Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Cgolqxctsvplu Hezet Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Saw blade retractable under table Ø 400 mm Saw blade swivel range from 0° - 46° Extraction nozzle Ø 120 mm / Ø 80 mm APA saw blade quick-clamping system Electric motor height and swivel adjustment via positioning control Double ball bearing circular saw shaft ensures absolutely smooth running Digital displays for degree setting, cutting height, speed and cutting width Push button switch with electric soft start (start/stop) Safety device can be swung away to both sides Electronic, wear-free motor brake Net weight approx. 1150 kg Extensions/additional equipment: ===== WIDTH STOP ELECTRIC MOTOR ADJUSTABLE FOR CUTTING WIDTH OF 1250 MM Dimension input on the control panel above via positioning control to 0.1 mm. Stop can be folded down in the parking position to clear a table surface. Safety cut-off bar in case of danger of crushing between width stop and trolley SWIVEL DEVICE for the cross slide including built-in length stop LENGTH STOP WITH DIGITAL DISPLAY ON EACH STOP FLAP Fully assembled, adjustable to 0.1 mm (3 digital displays) with battery operation, length max. 3300 mm THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW REMOTE LOCK WITH 50 MM GRID Blocking of the upper carriage in the loading position on the far right. This allows large panels to be easily aligned on the machine. PRE-SCORING UNIT AUTO-EPS 0.55 KW (0.75 HP) Electromotor positioning for side and height adjustment via LED display and memory function; when the pre-scoring saw is switched on, the unit automatically moves to the set position values; When switched off, the unit automatically moves under the table into a side parking position, so that saw blades larger than Ø 350 mm can be used without removing the scoring saw blades ADDITIONAL CORNER TABLE 750 X 940 MM FOR CUTTING WIDTH 1250 MM as an additional table support in addition to the standard table extension

Year of construction: 1972, Condition: good (used), 23 rolls, Ø 16 mm strip width: 170 mm strip thickness: 0,2 - 1,3 mm Cgslqxsbif Dyectzet

Condition: good (used), Wolfking SFG 850/200 Grinder Manufacturer: Wolfking Power Supply: 22 kW Head: 200 mm Hopper Capacity: 850 liter Capacity: +/- 6.000 kg/hour Machine Dimensions LxWxH: 1.600x1.700x2.100 mm Cgolqxcsucdidotzst Machine Weight: 1.000 kg.

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Price: per piece Cslqjckp S Eoxctzogt -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg

Condition: good (used), TECHNICAL INFORMATION: Cslqxcterpnf Rszsgt Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer

Year of construction: 2005, Condition: good (used), Demag Injection Moulding Machine Type: 200/580-840 Extra with robot Control: NC 4 Year: 2005 Clamping unit Cgjlqxjlpad Sectzet Clamping force t: 200 Opening stroke mm: 575 Distance between tie bars mm: 580x580 Installation height min/max mm: 340/690 Mould fixing platen size h x v: 860x860 Injection unit Screw size mm: 50 Injection shot weight in Polysterol gr: 400 Injection volume cm³: 442 Injection pressure increased bar: 1946 Size and weight Dimension HxWxD m: 5.4x1.7x2.1 Total weight Kg: 8200 Additional information Robot Kerzüge 1

Year of construction: 1979, Condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m Cgolqxcslp Uz Rjtzot

Year of construction: 1978, Condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Cslqxjd Nzfcoctzogt

Condition: excellent (used), Functionality: fully functional, Passing grinder OLIMPIA 200 with extraction Specifications: - condition - used - manufacturer - OLIMPIA Colqovgm T Sjxctzsgt - model - 200 - main motor 3.0 kW - max working width 200 mm - symmetrical tops with dimensions of 24 x 55 cm each - mechanical belt tensioning and oscillation - 1 sanding unit with viscera - built-in sawdust extraction - both tops adjustable - adjustable culageway at an angle of 12 x 60 cm - extraction stub - fi 80 mm - weight - about 250 kg - overall dimensions - 125 x 75 x 95 cm ( W x L x H ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site. - the price given in the auction does not include VAT

Condition: used, Gear motor, electric motor -Speed: 40.5 rpm Cgjlqxctjc U Rigjzet -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

Condition: new, Year of construction: 2024, back gauge travel distance R-axis: 630 mm, sheet thickness steel (max.): 2 mm, cutting length (max.): 2,050 mm, total width: 1,500 mm, total height: 1,200 mm, total length: 2,700 mm, overall weight: 1,360 kg, table height: 825 mm, warranty duration: 12 months, input voltage: 380 V, working length: 2,050 mm, hydraulic system: nie, type of motor: three-phase motor, Equipment: documentation/manual, finger protection, Mechanical sheet metal guillotine METFORMER MCO-2x2000mm Cgjlqovlxh Eoxctzst The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, MCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: used, Year of construction: 2001, Celaschi brand squaring machine, composed of 2 single-side machines (right + left), type TA, model 20-MCI, year 2001 (CE), with 2 milling groups per side, used. Workable piece size: min/max width: 60/160 mm Cgelqsk N I Nboxctzjt min/max length: 350/1400 mm min/max thickness: 13/23 mm

Year of construction: 2006, Condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Cgelqxceg Dvutetzst Price totally 1000 Euro. Available immediately.

Condition: used, Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine Cslqxctod N Hznozogt -Width: 200 mm -Length: 1500 mm -Height: 40 mm -Groove width: 14 mm -Weight: 80 kg

Condition: used, Gear motor, electric motor -Speed: 19.5/78 rpm -Power: 0.37/0.75 kW -Construction: B3 -Brake -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 400/210/H200 mm -Weight: 22 kg Celectg Rqsqxctzogt

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5/78 rpm -Power: 0.07/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 455/210/H205 mm -Weight: 22 kg/piece Cgjlqscg N S Hsxctzjt