Used Mc Cormick Mtx 185 for sale (6,113)

Condition: good (used), Year of construction: 2022, Haas UMC 1000 / 5 axles, Year of construction 2022, Haas touchscreen control, Travel X/Y/Z 1016/635/635 mm, spindle speed up to 8,100 rpm, SK 40 holder, 30-position tool changer, Control cabinet air conditioning unit, 3D measuring probe, Fsbeviuu Nevr Hq Iepg prepared IKZ, sync. tapping, 2 axes NC swivel rotary table, chip conveyor, Switch-on hours 3800 Spindle hours 1500

Condition: good (used), Year of construction: 2002, cutting width (max.): 320 mm, cutting length (max.): 210 mm, input voltage: 400 V, Machine is specially designed for smaller products (also double production) Double-sided cut station 2 Front edge cutting station 1 Febvr Hqorm Sg Ns Ispg Center cutting knife (double production) Max final formats with standard cutting blade 296X120mm Max final format with special cutting knife 296X160mm Min final format for double cut 30X40mm Min final format for single cut 40X40mm Max product thickness 3mm Paper quality 60-200g/m2 Max speed adjustable up to 12 000 1/h Infeed height adjustable from 600mm to 900 mm (suitable for folding machines and saddle stitchers) Electrical connection 3-phase, 380V+N+PE Power, current 3.5kW 10A Tools, operating instructions, spare parts list and electrical circuit diagrams included

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Fpebvr Heuhnwvoq Iog

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. 2-fold pallet change. Fpjbvrou S A Anj Hq Ijg IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery.

Year of construction: 1996, operating hours: 91,897 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS Fpsbvslruxfsr Hq Isg x-way: 600 mm y-way: 560 mm z-way: 560 mm Control: Siemens MACHINE DETAILS supply voltage: 400 V / 3 phases / 50 Hz Connected load: 60 kVA total power requirement: 12 kW Machine weight: approx. 10 t EQUIPMENT - 2 machine pallets - 1 probe

Year of construction: 2003, operating hours: 33,792 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28840003282, TECHNICAL DETAILS x-way: 800 mm y-way: 710 mm z-way: 710 mm B-axis: 360 Control: Siemens Sinumerik 840D number of pallets: 2 pallet size: 500 x 630 mm tool diameter: max. 120 mm tool holder: SK 50 Magazine: chain magazine with 62/90 places MACHINE DETAILS Machine weight: approx. 12.5 t (transport weight) Fpebvjlruqujr Hq Ijg height: 3,2 m space requirement: 6,0 x 6,5 m Rated power: 80 kVA Rated current: 120 A Operating voltage: 400 V / 50 Hz Compressed air: 6 bar

Condition: good (used), Year of construction: 1997, There are 2 machines available Heller MCPH 150 / 2 machines for sale, year of construction 1997, Control Unipro 90, travel X/Y/Z 630/520/570 mm, tool changer 52 times, Fobvr Hsugtl Asq Iepg SK 40 holder, spindle speed up to 8,000 rpm, 2-fold pallet 400 x 500 mm, IKZ 50 bar, Knoll coolant system, 4 axis 0.001°, chip conveyor, many parts have already been replaced, spare parts package available,

Year of construction: 2000, operating hours: 47,085 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D Fpebvr Hqolrupaj Ieg MACHINE DETAILS supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Condition: used, Year of construction: 2011,

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Fpjbvrsn Uum Hj Hq Iog Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm min./max. working height 4-170 Sanding belt width 1,370 mm Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - anti-kickback device in the infeed before the first unit Fsbjtwqn Ssvr Hq Ijpg - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: ready for operation (used), Functionality: limited functionality, To be sold in a package: HURCO BMC 30 Machine number: BK-9-002-020 Fpjbjt Takaevr Hq Ijg Year of manufacture: 1990 HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but not put into operation. Freight basis: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately

Condition: good (used), Year of construction: 2010, Spinner TTC 300 - 42, Year of construction 2010, Fanuc 31i control system, Bar machining up to 42 mm, Travel X1/Z1 180/450 mm, Febjvgcxwsvr Hq Ispg travel X2/Z2 110/450 mm, Machine only machines plastic, counter spindle, 2 x C axis, spindle speed up to 6,000 rpm, 2 turrets 12 speed, VDI 25, upper turret with attached tools, differential pressure clamping, chip tray,

Condition: used, Year of construction: 2022, front tire size: 800/65 R32, rear tire size: 540/65 R24,

Condition: ready for operation (used), Functionality: fully functional, 2 mains filters - NF 018-503 - 18A Fobot S Igtevr Hq Iopg

Condition: good (used), Year of construction: 2007, Spinner TC 77 L - MCY, Year of manufacture 2007, Siemens 840 D control system, turning length 1500 mm, turning Ø 300 mm, Y axis, C axis, turret 12-fold, all stations driven, drive power 35 KW, Fpjbvr Hqjup Az Ts Iog three-jaw chuck Ø 250 mm, tailstock, steady rest, spindle clearance 77 mm,

Condition: used, Year of construction: 2023, front tire size: 650/75R32, rear tire size: 600/70R24,

Condition: ready for operation (used), Functionality: fully functional, 2 frequency inverters - MC07B0150-503-4-00 / FSC11B - 22.2kVA Fpebvr Hqst Swapo Ieg

Condition: good (used), Year of construction: 2007, Spinner TC 110 MCY, Year of manufacture 2007, Fobvreup Azto Hq Ispg Siemens 840 D control system, turning length 1000 mm, turning Ø 300 mm, Y axis, C axis, spindle passage 110 mm, revolver 12-fold, all stations driven, tailstock, steady rest, drive power 35 KW,

Condition: used, Year of construction: 2015, hydr. drive Weighing device / Fpsbvr Hqst Ebaye Ijg

Condition: ready for operation (used), Functionality: fully functional, 1 piece Frequency inverter - MC07B0220-503-4-00 / FSC11B - 1.5kW Fpebst Sv Rysvr Hq Isg

Condition: used, Year of construction: 2023, . / Fjber Ty Rfjvr Hq Iopg

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2004, Quantron P Terminal 3000L hopper approx. 12000ha spread tarpaulin working width / 27m mud flap hyd. Drive Lighting / Fpjbvr Hqstgqfdj Ijg