Used Mc Cormick Mtx 185 for sale (6,146)

Condition: like new (used), Make: IMC Type: 1 head automatic Model: 478 Capacity: Up to 3,600cph Direction: Left right Frame: Mild steel, paint-coated Dimensions: L x H x W = 1200 x 1300 x 2100mm Weight: 1000Kg Power-supply: 380V+N+E, 2Kw Tooling: 1 set for 153mm tin-can, Features: With Stainless steel infeed conveyor / infeed screw on Stainless steel support Make: Ocim Colqoh I Nr Rj T R D Njgt Type: semiautomatic table model ROPP closing machine Model: Super Ermetica Capacity: up to 600 per hour depending on operator Frame: steel painted Dimensions: L x B x H = 1.000 x 700 x 1.700 mm Weight: 150 kg Power-supply: 380 Volt – 50 Hz – 0,37 KW Tooling: 28,5 mm as-is or adjusted to customer needs

Condition: new, Year of construction: 2023, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, McCONNEL T500 RADIO POWERFUL Cgslq T Rju Ruruo D Nst DEMONSTRATION UNIT - Remote controlled Boschung mower. - Low weight, low center of gravity in the middle of the vehicle. - Active track drive with 4 movable rollers at the bottom and 1 roller at the top. - Hardened gears on drive side. - Front track guide with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with high groove A/S profile. - Hydraulic track tension via grease gun with pressure gauge. - Removable bottom plate. - 3 cylinder Perkins diesel engine 37 kW / 50 HP. - Weight of base machine (without attachments) 1250 kg. - Fuel tank: 21 liters. - Oil tank: 18 liters - 28 liters present in the circuit. - 8 liters of SAE J 1036 (or similar) coolant present in the machine - 2-stage fully hydrostatic stepless drive. - Travel speeds: 0 - 4 Km/h and 0 - 7 Km/h. - Cutting height adjustment in 5 steps. - Hydraulic lift -300mm to +400mm. - Floating position mower rotor left/right 14 degrees. - Motor permanently mounted; cannot be rotated. - Oversized oil pan. - Motor approved for use on slopes up to 55 degrees. - Modified lubrication system for use on slopes. - Electronics mounted separately from motor (no vibration effects). - Cooling system completely rear-mounted, away from dust and dirt. - Cooling system combined: Engine radiator and oil cooler together. - Standard spiral fan, operated by remote control. - Rotation of blades via hydraulics. - Standard machine-mounted safety devices with alarm function: - Shutdown in case of no oil pressure on the engine. - Standstill function in case of inoperative contacts. - Signal for clogged filters. - Signal when engine temperature is too high - Oil and diesel fluid indicator. - The machine is equipped with an emergency control in case the machine or radio remote control fails. - Brake system on engines Track drive; when not being operated, the machine is on the brakes. - Low ground pressure

Year of construction: 2012, Condition: used, New: Yes Field of application: Grounds care Csljt S Tz Nsq T R D Negt General condition: very good Technical condition: very good Visual appearance: very good Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), Year of construction: 2009, operating hours: 200 h, Functionality: fully functional, machine/vehicle number: 15119-1, type of input current: AC, overall weight: 6,700 kg, input voltage: 20,000 V, frequency: 50 Hz, total height: 245 mm, total width: 148 mm, total length: 226 mm, nominal power (apparent): 3,150 kVA, secondary voltage: 400 V, primary voltage: 20,000 V, nominal current: 4,550 A, input current: 90 A, type of output current: AC, output voltage: 400 V, Equipment: type plate available, Three-phase power transformer TMC 3150 kVA, dry encapsulated type, manufactured in 2009, frequency 50Hz and AN cooling. Transformer ratio 20kV/400V, Dyn11 configuration, thermal class F, weight 6700 kg, IP 00, Vdc 8.76%, noise level 67dB and registration number 15119-1. Cjlq Teq T Rzce R D Nsgt

Condition: ready for operation (used), 6222 SAMCO LONG-BELT SANDER Table length: 2930 mm Cjlq T R Dju Sr Txo Nsgt Table width: 800 mm Motor power: 4 kW Electric table height adjustment Power supply: 380 V Belt width: 150 mm Spring-loaded belt tensioning Right/left rotation

Condition: excellent (used), Scm Samco T40I spindle moulder with trolley and 3-roller feed Cgjlq Tsvuihzo R D Net Technical data: Spindle tilt +5° to -45° mm Spindle diameter 30 mm Engine speed 1,400, 3,50,000 rpm Voltage 400 V Working height 900 mm Engine power 3kW 3-roller feed Year of production 1996 Machine fully functional Very good condition

Year of construction: 2013, Condition: used, Pneumatic compact slide Year of manufacture estimated, brand new Cgslq T R Dou A I Hve Net 2 pieces available Stock 102

Condition: new, Year of construction: 2021, Equipment: hydraulic folding, lighting, MCCONNEL PA6085 arm flail mower Series of professional arm mowers with a very wide range of applications. As standard, the machine is easily attached to the tractor's three-point linkage. Axle attachment with quick-change system is optionally available. The machine is driven by a 540 rpm PTO with 85 horsepower at the rotor. - Range of 6.0 m - Right-hand operation - Three-point attachment (five-point shaft attachment available on request) - Parallel arm guidance - Hydraulic crash protection - Hydraulic boom rotation - 85 hp, powerful hydraulic system - Hy-Reach arm guide - Conical, seam-welded arms made of Domex steel -SoftStart rotor activation - High capacity oil cooler - LED lawn lights - Easy to use Cgolq T Rou Rugls D Not - Multicut 1200 flail rotor, direct drive Working width 1.20 m, weight approx. 330 kg, incl. skids

Condition: excellent (used), Samco Unilev 15 edge grinder Belt dimension 150 x 2170 mm Two belt speeds Adjustable carcass Tabletop adjustable from 0-30 degrees Adjustable grinding height Pneumatic tensioning of the grinding belt Sanding belt oscillation Colotyngkeq T R D Negt Motor power 3kw

Condition: excellent (used), Functionality: fully functional, power: 261 kW (354.86 HP), fuel type: diesel, color: green, empty load weight: 56,000 kg, Year of construction: 2018, operating hours: 2,200 h, Manufacturer: Mc Closkey Type: J45R Year of construction: 2018 Hours: 2,200 (engine) 1,800 (crusher) Engine: Volvo D11 Power: 261 kW Weight: 56,000 kg Hopper: 5.6 m³ with Bofor pre-screen Opening: 1,140 mm x 688 mm Screen box: 3,050 mm x 1,525 mm Cjlq Tevgdm Ao R D Nogt Accessories: Return belt Magnetic separator Ready for immediate use. Subject to errors and prior sale.

Condition: good (used), pneumatic clamps automatic material feeding unit angle regulation pneumatic movement of heads material support slot length regulation slot distance regulation Colqenwnd Ae T R D Nogt

Condition: as good as new (ex-display), Year of construction: 2024, DuraScan 20 G5 micro/small load hardness tester for Vickers, Knoop and Brinell for standard-compliant testing to EN ISO and ASTM - Torsionally rigid cast aluminum base body, granite base plate with vibration-damping feet for main load range 10 g - 62.5 kg (0.098 - 613.16 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically motorized test unit - 12MPix color camera for 3-step zoom - Manually swiveling 3-fold measuring turret - incl. 2 objective and 1 indenter adapter - Motorized linear Z-axis, travel 235 mm Cgolsr Ilmysq T R D Not - Manual cross slide with analog micrometer spindles, travel 25 x 25 mm - Height adjustment for rapid traverse 20 mm/s - High-performance LED incident light illumination - Capacitive 10" touch display with LED backlight - Integrated PC with Win 10 IoT 64-bit and 128 GB SSD memory - Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 - ecos Workflow Touch basic operating software incl. 1 test method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell - Automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CHD-M for creating manual Chd, Nht, Rht and series measurements with inspection coordinates - ecos CODE for reading and creating QR codes - ecos EXPORT EDITOR for customizing the export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) - ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 28.224,-€ incl. 1 test method. Additional test methods can be activated for an additional charge.

Year of construction: 2013, Condition: used, Pneumatic compact slide Year of manufacture estimated, brand new 3 pieces available Colq T Rou A I Hpe D Negt Stock 101

Condition: ready for operation (used), Year of construction: 2018, Equipment: hydraulic folding, lighting, McConnel SR620 rotary mulcher Cgolqju Rt Sas T R D Njt Heavy-duty rotary mulcher for large-scale tillage of pastures, fallow land and wastelands, mulching capacity up to 50 mm ø. Also particularly suitable for maintaining green spaces, airfields, military training grounds and for mulching crop residues, brush and trees. Suitable for tractors with an output of 120 hp or more. Is driven by a 1000 rpm PTO. Working width 6.20 m Working range of the blades from +90° to -45° 4 blades per rotor Hydraulic cutting height adjustment Oversized gearbox Front and rear chain guard Interchangeable skids Lighting system (accessory for SR 420) Wide angle PTO with freewheel PTO shaft with slip clutches for rotor drive Upper hitch

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Power connection / control voltage: 220 Volt / 50 Hz Machine no.: 90042033 Cgelqsurldcj T R D Not Remarks: The machine is under power in our warehouse and is ready for demonstration

Condition: ready for operation (used), Year of construction: 2007, operating hours: 25,355 h, Functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 5,000 rpm, bar diameter: 65 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control: Sinumerik 840 T Siemens X-axis: 210 mm Z-axis: 610 mm C-axis: 360 ° Swing diameter over bed: max. 540 mm Swing diameter over face slide: max. 360 mm Turning diameter: max. 310 mm Turning length: max. 520 mm Bar diameter: max. 65 mm Center width: 650 mm Main spindle Speed range - main spindle: 60 - 4,200 rpm Drive power - main spindle: 18 / 15 kW Cslqeuuip Ue T R D Njgt Torque: max. 192 Nm Spindle head: DIN 55026 / KK6 C-axis: 0.001 ° Tool turret Positions: 12 Tool holder: VDI 30 DIN 69880 Driven tool stations: 12 slots Speed range - driven tool stations: 0 - 5,000 rpm Drive power - driven tool stations: max. 5 kW Torque - driven tool stations: max. 20 Nm Feed rates Rapid traverse speed: 24 m/min Feed force (X / Z): 5,000 / 7,000 N MACHINE DETAILS Machine weight: approx. 4.5 t Space requirement: approx. 4.9 x 2.5 x 2.0 m Total connected load: 20 kVA Switch-on hours: 48,262 h Automatic operation: 25,355 h Parts counter 1 / 2: 36,488 pieces EQUIPMENT - documentation - Chip conveyor - Coolant device - Tailstock - Collet chuck - Various tool holders, driven + static holders - Tool presetting (touch setter) - Bar loading magazine 3 m

Condition: good (used), Year of construction: 2000, Functionality: fully functional, 2 machines available. Center width 700 mm Center height 170 mm Swing diameter over bed ø 340 mm Swing diameter over cross slide ø 190 mm Bed width 260 mm Longitudinal slide travel 600 mm Cross slide movement 220 mm Displacement of top slide 110 mm Cross slide length 410 mm Cross slide width 150 mm Guide length of bed slide 380 mm Turning chisel cross-section 20 x 20 mm Distance turning center - top slide 34 mm Swivel range of top slide (support) 60 / 120° Main spindle: Spindle connection DIN 55029 (Camlock) S 5 Spindle bore ø 50 mm Inner taper according to DIN 7178 1 : 22 Spindle diameter in front bearing ø 70 mm Max. Chuck diameter ø 200 mm Max. Face plate diameter ø 200 mm Spindle speeds 40 - 3000 1/min Infinitely variable speed control Mechanical speed stages 4 Main drive: Power at 40% duty cycle 5.3 kW Max. Nominal torque on the main spindle 640 Nm Feed rate: 20 (28) longitudinal feeds Z 0.045-0.787 mm/rev 20 (28) face feeds X 0.023-0.406 mm/rev Thread: 20 (28) metric threads (basic version) 0.4 - 7.0 mm 32 inch thread (with optional wheel set D3Z200) 56 - 4 Gg/inch 28 modular thread (with optional wheel set D3Z200) 0.2 - 3.5 32 diam. Pitch thread (with optional wheel set D3Z200) 112 - 8 Tailstock: Quill diameter ø 50 mm Cgelq Tou A Iugo R D Njt Inner taper of quill MK 3 Quill stroke 120 mm Lateral adjustment ± 13 mm Allowable workpiece weights Flying clamped 50 kg with tailstock supported 150 kg

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, DuraVision 200 G5 small load/macro hardness testing machine for Brinell, Rockwell, Vickers and Knoop for standard-compliant testing to EN ISO and ASTM as well as plastics testing to ISO and carbon testing to DIN - Torsionally rigid cast iron base body for main load range 0.3 kg - 250 kg (2.94 N - 2,452.5 N) Cgolq T R Djr Ilc Tj Not - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically motor-adjustable test unit - 12MPix color camera for 3-step zoom - Motorized 3-position star turret incl. 1 objective and 1 indenter adapter - Removable clamping jaws with clamping inserts enable unclamped and clamped tests - Motorized Z-axis, travel 500 mm - Test height 500 mm, throat depth 320 mm - Adjustable clamping force 200 kg - 2,000 kg - Height adjustment for rapid traverse 25 mm/s - Support, dimensions (WxD) 370 x 447 mm - Plant table, support diameter 90 mm - Maximum weight of the workpiece 500 kg - High-performance LED incident lighting - Capacitive 10" touch display with LED backlight - Integrated PC with Win 10 IoT 64-bit and 128 GB SSD memory - Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 1x Ethernet - ecos Workflow Touch, intuitive basic operating software incl. 1 test method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell, automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CODE for reading and creating QR codes - ecos EXPORT EDITOR for customizing export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow Touch - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant tests of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 44.984,-€ incl. 1 test method. Additional test methods can be activated for an additional charge.

Year of construction: 2016, Condition: used, Pneumatic 2-finger gripper - Gripper Year of manufacture estimated, brand new 3 pieces available Cgelq T R Deu Aw U As Not Bearing 117 A

Condition: new, Year of construction: 2021, The McConnel barrier mower is a hydraulic driven mowing machine, with an independent PTO operated system. The equipment can be attached to the tractor simply with a 3-point hitch, both front and rear, or DIN plate, and can work on both right and left side by simply reversing the cutting discs. Cgelqsh Hurko T R D Not Builted on a sturdy tubular frame with a total weight of 1500 kg, it is equipped with two side arms that open up to overcome road guardrails, steel cables and hedges of a maximum height of 170 cm, and is able to cut simultaneously from both sides and underneath the obstacle with a cutting width of about 150 cm. The great versatility and working speed of the machine partly depend on the possibility of opening the external arm 180°, permitting a fast and easy positioning and, most of all, enabling the machine to continue mowing with the internal disc while the external one, by lifting up, can pass over road or advertising signs that may be present along the way, while automatically interrupting the rotation of the blades. Energreen Raiber

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,680 h, Functionality: fully functional, turning diameter: 170 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, center width: 600 mm, TECHNICAL DETAILS Travel in X/Y/Z: 160 mm / - / 310 mm max. rod passage: DN 45 mm max. turning diameter: 170 mm Swing diameter over bed: 430 mm Center distance: 600 mm (spindle nose - center point) Main spindle max. speed: 0 - 6,300 rpm max. drive power: 11 kW max. torque: 70 Nm C-axis: available Tool turret Number of tool positions: 12 Driven tools: 6 max. speed: 0 - 5,000 rpm max. drive power: 4 kW max. torque: 16 Nm MACHINE DETAILS Machine switched on: 33,250 h Ready for operation / automatic: 30,652 h Production mode: 9,680 h Workpiece counter: 400,014 pieces Machine dimensions: 2,250 x 1,675 x 1,940 mm Bar feeder dimensions: 5,800 x 550 x 1,500 mm Weight: 3,300 kg Cgslq Tsvbzr Eo R D Net EQUIPMENT - C-axis and tailstock - Tool turret with 12 positions, 6 of which are driven - Bar loader LNS 6.26 HS 4.4 (year of manufacture 2019) - Large tool package

Year of construction: 2024, Condition: as good as new (ex-display), DuraScan 70 G5 micro/small load hardness testing machine for Vickers, Knoop and Brinell for standard-compliant testing to EN ISO and ASTM - Torsionally rigid cast aluminum base body, granite base plate with vibration-damping feet for main load range 10 g - 62.5 kg (0.098 - 613.16 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically/horizontally motorized test unit - 12MPix color camera for 3-step zoom - Motorized 6-fold measuring turret incl. 5 objective and 1 indenter adapter - Motorized X, Y and Z linear slides in asym. Arrangement, travel 150 x 150 x 260 mm (X/Y/Z) - Large wear plate 150 x 200 mm - Height adjustment for rapid traverse 20 mm/s - ecos overviewPRO, 12Mpix color camera with macro lens for user-friendly placement of test points in the live image (field of view 65x50 mm) - Precise display thanks to coaxial illumination - High-performance LED incident light illumination - Control via external PC system (available separately as option ETZ12-D) - ecos Workflow Pro basic operating software incl. 1 inspection method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell - Automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CHD-C+ for creating automatic Chd, Nht, Rht and series measurements with test coordinates (up to three hardness limits per series possible) - ecos multiple sample module for programming and fully automatic measurement of multiple samples - ecos Panorama for creating high-resolution overview images with live in image function - ecos EXPORT EDITOR for individual customization of export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow Pro - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 49.080,-€ incl. 1 test method. Coler Ilfcsq T R D Njgt Additional test methods can be activated for an additional charge.

Year of construction: 2014, Condition: used, Compact Slide Cgelq Tjnxpcao R D Not Max. Pressure 0.7 MPa New, year of manufacture estimated 3 pieces available Bearing 208 B

Year of construction: 2022, Condition: as good as new (ex-display), Can be attached to wheel loaders and various implement carriers as well as McConnel Robocut or other tracked mowers Standard with hydraulic swivelling device via 2 heavy hydraulic cylinders (constant speed in both directions) Controlled via remote control of the carrier vehicle HEAVY-DUTY piston motor with freewheel and pressure relief valve for safe milling at the load limit Hydraulic motor optimally matched to the milling unit Cgjlq T R Dekvnawj Net Large swivel range enables wide-ranging work without awkward manoeuvring Flexible working even in areas difficult to access HARDOX milling wheel ergonomically shaped for a large cutting depth Maintenance-friendly design Hydraulic hoses as standard Hydraulic requirements: 1x supply line, 1x pressure-free return line, 1x pressure-free leakage oil line to tank

Condition: used, We are selling this used hardness tester in its current condition. Colqjtyi D Dj T R D Nogt Price on request. A general overhaul may be possible, please contact us.