Used Mc Cormick Mtx 185 for sale (6,138)

Condition: excellent (used), total height: 2,590 mm, total length: 6,060 mm, total width: 2,440 mm, Year of construction: 2012, 2012 CIMC 20FT ISO tank container 25,090L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes, UN PORTABLE, T12 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+140 degrees valid 2.5Y- + CSC inspection until 12-2026 Cgohx Dnkevrh Dis Tet = More information = General information Year of construction: May 2012 Model year: 2012 Usable material: Chemicals Weights Empty weight: 3,950 kg Payload: 32,050 kg GVW: 36,000 kg Functional Load space capacity: 25,000 l Building brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, Functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Cohx Dsv Iqm Senk Tegt Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: excellent (used), Year of construction: 2010, Brushing sander DMC MASTERBRUSH 1350 RDBB Working width 1350 mm Electronic control Hydra V-Pad 10.4” plc 8.4.8 Worktop with fixed height of 900 mm Min and max workable thickness 8-200 mm Perforated table and belt 11 Kw electric fan with silencer Cehx Dnkju Nf A Us Togt Carpet advancement with 2.2 kw inverter 40 Sh conveyor belt Rear roller towing the carpet covered in rubber Automatic carpet centering Roller conveyors with two rollers at the entrance and exit Rubberized pressure rollers at the entrance and exit of the operating groups 1 position Sanding roller group diameter 320 mm Sh 30 pneumatic on/off Oscillating blowers 11 Kw motor driven by inverter 2 positions Orbital group with rotating disc brushes 19 discs rotary with a diameter of 125 mm Main motor 1.1 kw driven by inverter Independent motor orbital movement driven by inverter Set of 150 grit abrasive strips Set of tampico abrasive strips 3 position Helical brush roller group diameter 310 mm Opposite rotation to the advance 4 kw motor driven by inverter Set of 150 grit abrasive strips Set of tampico abrasive strips 4 position Helical brush roller group diameter 310 mm Opposite rotation to the advance 4 kw motor driven by inverter Set of 150 grit abrasive strips Set of tampico abrasive strips 5 position Satin roller diameter 200 mm 2.2 kw motor

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm Cgshx Dnkogr Er So Tjt grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: good (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: SA / 004174, working width: 1,350 mm, overall weight: 2,500 kg, height adjustment type: electric, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, motor voltage: 400 V, frequency: 50 Hz, Machine with a longitudinal sanding belt, suitable for lacquer sanding. Equipped with brush roller and electronic sectioned pad. Vacuum in the table and carpet. Cehx Dnjugn Dmsk Tegt

Condition: used, Functionality: fully functional, EMCO EMCO Maximat V13 lathe 380 volts Cehxov H Uklo Dnk Togt Factory no. D1E8706022 MB no. 99826 Condition used Location Munich-Pasing Price: €8900/net

Condition: excellent (used), With C-axis, with driven tools Cshx Dnksvvv R Ss Togt SIEMENS 810D PL Shopturn control Turning length -225 mm Turning diametre 250 mm Spindle speeds 60 - 6'300 rpm Tool changer with 12 positions, 6 of them are driven Misc. accessories MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, Functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg Cgjhx Djv Iqlzenk Tst With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: new, Year of construction: 2023, fuel type: diesel, color: other, General information Field of application: Construction Weights Empty weight: 1.605 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.300 cm Other information Emission level: Stage V / Tier V Max swing of arm in degrees: 360 Max swing of platform in degrees: 90 Rental currency: EUR Cehjrbwwwsx Dnk Tsgt Additional information Please contact Jan De Lepeleer for more information

Year of construction: 2001, Condition: excellent (used), Digital display Heidenhain. Slide travel range Cgshxsnab A Ns Dnk Tot Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm Cohju N Dpmjx Dnk Tegt - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: excellent (used), Year of construction: 2008, turning diameter 500 mm turning length 550 mm control SIEMEMS Sinumeric 840D x-travel 260 mm z-travel 610 mm bar material dia. 65 mm main spindle speeds: 0-5000 speeds station 1 5000 U/min speeds station 2 7000 U/min c-axis 2 turret (x-stations) 12 y-axis mm Cgohx Dnkevwgq Eo Tjt toolpiece turning speed range 0-5000 U/min Y-axis (column - cross) mm weight of the machine ca. 5700 t dimensions of the machine ca. 5500 x 2100 x 2100 m The EMCO Maxxturn 65 is in very, very good condition and is delivered without accessories. Y-axis mm Main and counter spindle with 12-position turret with driven tools Speed 0-5000rpm, parts catcher. Operating hours: 240009h / 27000h

Condition: used, Year of construction: 2011, cooling capacity: 424 kW (576.48 HP), overall weight: 4,000 kg, Manufacturer: Mcquay Type Mngese125 ST 001 Power: 424 KW Weight: 4000 kg Cgohsvyhfiex Dnk Tjt Year of manufacture: 2011 R134 a It had a cooling capacity of 424 kW, but the compressor in one circuit was not working, the other is OK. filled with gas and ready to use with 1 wheel!!! It has been officially serviced by Daikin Mcquay throughout. The system can be operated at half capacity or restored by repairing the second compressor.!!

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg Cgehx Dov Iqbcenk Tst EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: good (used), Year of construction: 1990, 1 x Loading Magazine Iemca TAL 65/32 Auto Year of Manufacture: 1990 Bar Machining Diameter: 5 - 65 mm Bar Length: 3200 mm Built-in Channel: 42 mm Formerly attached to a Traub TNS CNC Lathe Extensive range of accessories: Including 2 x complete 66 mm channels 1 x complete 54 mm channel 1 x complete 20 mm channel Plus additional channel pieces in various sizes Collets/washers for channels/sliders, etc. (see photos) Cohxsrgatbj Dnk Togt The loading magazine can be inspected at our warehouse in Reichenbach at any time.

Condition: good (used), Functionality: fully functional, 3 sections Fully functional! Cgehx Djvu Dz Ajnk Tst

Condition: new, mileage: 959 km, power: 338 kW (459.55 HP), fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/70/22.5, fuel: diesel, wheelbase: 3,700 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, spoiler, = More options and accessories = - Acc - Aluminium fuel tank - Roof hatch - Roof spoiler - Double fuel tank - EBS - Electric windows - Remote central locking - Speed limiter - Refrigerator - Led lighting - Air suspension - Fog lights - Radio/CD player - Disc brakes - Sleeping cabin - Sideskirts - Sunshade - Auxiliary heating - Xenon lighting = Remarks = Adblue 80 ltr 900 litres diesel Euro 6 = More information = General information Year of manufacture: 2022 Drivetrain AdBlue system: Yes Gearbox Gearbox: 12 gears, automatic Axle configuration Tire size: 315/70/22.5 Brakes: Disc brakes Front axle: Steered; Tire profile left: 100%; Tire profile right: 100%; Suspension: leaf spring Cohxouurpds Dnk Tjgt Rear axle: twin tires; Tire profile left inside: 100%; Tire profile left outside: 100%; Tire profile right inside: 100%; Tire profile right outside: 100%; Suspension: air suspension Condition General condition: very good Technical condition: very good Optical condition: very good More information Contact Bart Companjen, Giel Companjen, Bertus Companjen or kantoor, office, buro. for more information.

Condition: ready for operation (used), Year of construction: 1999, Immediately available from location: CNC vertical machining center EMCO Type VMC 600 Year of manufacture 1999 Heidenhain TNC 426 D Electronic handwheel Travel paths X/Y/Z 1200/410/370 mm Cohxsv D A Tvs Dnk Tegt SK 40 Magazine 24 slots Speeds up to 6000 rpm Vices 3 Weight 4 tons Price of EUR 8,000 plus VAT from location SK 40

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Cgehx Dnkov Hqnto Tet Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm Cgohev Ip Izex Dnk Tjt MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Cgshx Djv Ip Alenk Tet Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: like new (used), Year of construction: 2011, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 6BE1AZ2661, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, swivel angle A-axis (min.): -100 °, swivel angle A-axis (max.): 100 °, The machine was used for training purposes and has only approximately 400 spindle hours. TECHNICAL DETAILS X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis swivel range: ± 100° Cohx Dnov Ipnhjk Tsgt A/B-axis speed: 22 / 16 rpm X/Y/Z rapid traverse: 24 m/min Control: Heidenhain TNC 426 Mill Worktable Clamping area: 700 x 520 mm Tolerance: 5 T-slots with 18 mm Load capacity: 500 kg Spindle Speed range: 50 - 12,000 rpm Drive power: 11 kW Tool changer Tool magazine: 20-station Change mechanism: Automatic double-arm quick changer with Tool length adjustment device Tool holder: SK 40 with directional logic (DIN 69871) Tool diameter: 80 / 125 mm Tool length: 250 mm Tool weight: 8 kg MACHINE DETAILS Spindle hours: approx. 400 h Dimensions: 2,040 x 2,445 x 2,920 mm Weight: 4 t Air pressure: 6 bar EQUIPMENT - Win3D View simulation - 5th-axis rotary swivel unit, built in 2013 - Electronic handwheel - Coolant system (internal coolant supply possible) - Comprehensive tool set for operation - Tool cabinet with 66 tool holders - Center-clamp vise and three-jaw chuck - Tool blow-out device - Cover including chip protection door - Leveling elements - 3 pieces

Condition: like new (used), Year of construction: 2016, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: A6D160702, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, turning diameter over bed slide: 130 mm, bar passage: 15 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 180 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Cgshx Dsv Ipbusnk Tst Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: 180 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Optical tool presetter - Tailstock - Pneumatic chuck - Automatic door - I/O expansion board for robotics and DNC interface

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Cgohov In Nkjx Dnk Tot Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Cohx Dov Imzfsnk Togt Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck