Used Mc Cormick Mtx 145 for sale (6,771)

Condition: used, Barloader IEMCA PRA 40/38F Cgjlqxeu Twdpj Hwuet

Condition: excellent (used), Technical data will be provided later Cgjlqx Hwsibdd Ieuot

Condition: good (used), Year of construction: 2007, Functionality: fully functional, TECHNICAL DETAILS Swing diameter over bed: 430 mm Swing diameter over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 - 6300 rpm Torque at the spindle: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Drive power: 13 kW Resolution of the rotary axis: 0.001 Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Number of tool positions: 12 Tool shank according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Speed range: 0 - 5 000 rpm Cjlstt Dzyjqx Hwuogt Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4000 / 6000 N Acceleration time: 0.1 s Position spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1152 mm Height of the machine: 1,940 mm Installation area: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system container volume: 230 liters Pump output: 0.57 kW Bar loader Bar length: 100-800 mm Bar diameter: 6 -45 mm Material storage: 13 bars with Ø 45 mm Length: 1200 mm Width: 1100 mm Weight: approx. 330 kg

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: L13 1320, CNC lathe FEMCO HL25 Year of manufacture: 2003 Machine number: L13 1320 Control: FANUC Series 18-T Further information on request! Celqx Hsuliyhjwuegt

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, For sale here is a bar loader from Iemca. The bar loader is in very good condition. It is ready for immediate use and available. Manufacturer: Iemca Type: Concept 325 Bar diameter: 3-25mm Cgolqoqygawex Hwujt Maximum bar length: 3200mm

Condition: new, Year of construction: 2022, Functionality: fully functional, Year of manufacture of the machine was December 2022 - the manufacturer confirms that the warranty (on parts) is valid until December 2024 Machine still in OVP / original packaging! TECHNICAL DETAILS Control system: Sinumerik 840-sl/ OPERATE Swivel range over bed: Ø 430 mm Swivel range cross slide: Ø 300 mm Distance from main spindle to counter spindle: 720 mm Turning diameter: max. Ø 300 mm Workpiece length: max. 480 mm Bar passage: Ø 45 mm Travel paths Travel X / X2: 160 / 150 mm Travel Z / Z2 / Z3: 510 / 510 / 510 mm Travel Y: +40 / -30 mm Main spindle Speed range: 0 - 7000 rpm Torque at the spindle: max. 100 Nm Spindle connection: DIN 55026 A2-5 Spindle bearing (front inside diameter): Ø 85 mm Spindle bore: Ø 53 mm Counter spindle Speed range: 0 - 7000 rpm Torque at the spindle: max. 100 Nm Spindle connection: DIN 55026 A2-5 Spindle bearing (front inside diameter): Ø 85 mm Spindle bore: Ø 53 mm C-axis Resolution: 0.001° Rapid traverse speed: 1000 rpm Spindle indexing (disk brake): 0.01° Drive power Main spindle: 15 kW Counter spindle: 15 kW Tool turret 1+2 Number of tool positions: 2 x 12 Tool holder according to VDI (DIN 69880): VDI 25 Shank diameter for boring bars: Ø 25 mm Turret indexing time: 0.2 sec Driven tools 1+2 Speed range: 0 - 6000 rpm Torque: 16 Nm Drive power: 4 kW Number of driven tools: 2 x 12 Feed drives Rapid traverse speed X / Y / Z: 30 / 15 / 45 m/min Feed force in the X-axis / Y-axis: 4000 N Feed force in the Z-axis: 5000 N Feed force in the counter spindle of the Z-axis: 6000 N MACHINE DETAILS Connected load: 30 kVA Supply pressure: 6 bar Height of the machine: 1985 mm Space required WxD without chip conveyor and coolant: 2680 × 1950 mm Occupied area WxD with chip conveyor and coolant: 3990 × 1950 mm Total weight of the machine: 4200 kg Transport dimensions: 2820 x 2150 x 2295 mm Transport weight with/without pallet: 4000 / 3700 kg EQUIPMENT chip conveyor Integrated coolant device Tank volume 300 l Cgolstwbx Ijqx Hwujt Coolant pumps for the tool turret 2 x 14 bar Flushing pumps for the work area 2 x 3.7 bar Hollow clamping cylinder on the main spindle Draw tube for the main and counter spindles Mechanical spindle brake Part ejector and flushing through the counter spindle

Condition: used, TECHNICAL DETAILS Cgjlqeu Hacdox Hwuot - maxi diameter : 40 [mm] - maxi bar length : 3800 [mm]

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 830 mm, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 199, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control system: Siemens 840D, software version 6 Longitudinal travel (X-axis): 1,200 mm Vertical travel (Y-axis): 850 mm Transverse stroke (Z-axis): 830 mm Rapid traverse (X- and Z-axis): 75 m/min Rapid traverse (Y-axis): 60 m/min Measuring system (X, Y, Z axes): Heidenhain with pressure system Positioning accuracy (P, VDI 3441): 6 µm Repeat accuracy (Ps, VDI 3441): 3 µm Spindle unit Tool holder: HSK-A100 Spindle speed: max. 8,000 rpm Spindle power (S1): 50 kW Spindle power (S6, 25%): 60 kW Torque (S1): 300 Nm Torque (S6, 25%): 487 Nm Tool changer Capacity (basic equipment): 199 tools Max. tool length: 500 mm max. tool weight: 25 kg Tool change time: 2 s Pallet pool Number of positions: 10 Pallet dimensions: 630 x 630 mm Max. pallet load: 1,000 kg Pallet change time: 30 s Interchangeability: pallets 630 x 630 mm and 630 x 800 mm Rotary table Continuous rotary table (B-axis): 3,600,000 positions Rotation speed: 20 rpm Cooling system Coolant tank capacity: 1,000 l Filter system: 3 filters (2 with 500 µm, 1 with 40 µm degree of filtration) MACHINE DETAILS Space requirement (L x W): 12,045 x 10,545 mm EQUIPMENT - Chip conveyor: Scraper conveyor with high chip ejection and rear chip outlet. - Automatic tool and parts cleaning (M function) - Tool breakage control - Electrical control cabinet with air conditioning - Protective cladding on the machine - Multi-color signal lamp - High-precision continuous rotary table (B-axis) Cslsvb Ewxjqx Hwusgt - 10 pallets

Condition: used, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: BF15103648, TECHNICAL DETAILS WORKING RANGE Travel in X/Y/Z: 160 /+40/-30 / 510 mm Bar passage: max. 45 (51) mm Turning diameter: max. 300 mm Rotation diameter over bed 430 mm Rapid traverse speed X/Y/Z 30 / 15 / 45 m/min MAIN SPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm COUNTERSPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm TOOL TURRET 1 VDI size: VDI 25 Number of tool positions: 12 Driven tools: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Celqx Hwett D Adoujgt Torque: max. 16 Nm TOOL TURRET 2 VDI size: VDI 25 Number of tools: 12 Of which driven: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm EQUIPMENT - Chip conveyor - Parts catcher - Accessories shown

Condition: good (used), Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning length: 1,000 mm, This EMCO E 200 cycle lathe is supplied with a collet chuck, three-jaw chuck and various tool holders. Colqxot R Rg To Hwuegt

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW Cgelqx Hst Hmg Ijwust - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 450 kg, grinding belt width: 150 mm, extraction connection diameter: 140 mm, rotational speed (min.): 1,480 rpm, rotational speed (max.): 2,840 rpm, type of motor: three-phase motor, SAMCO Unilev150 double-sided edge grinder Specification: - condition - used - manufacturer - SAMCO Cgolqjthh Rrjx Hwust - model - Unilev 150 -working height - 150 mm - grinding belt dimensions 150 x 2150 mm - two speeds of grinding belt - rollers for grinding inner curves - tops with dimensions 22 x 144 cm - both tops adjustable in angle from 0-30 degrees - motor power - 3,0 kW - pneumatic tensioning and oscillation of the belt - adjustable veneer sanding visor on one side and " back" 15x75 cm on the other side - attachment, protractor for sanding at an angle - extraction stub - fi 140 mm - year of production - 1988 - weight - approx. 450 kg - overall dimensions 144 x 71 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: used, TECHNICAL DETAILS - Bar diameter : 12 maxi [mm] Cjlqxsuhbl Te Hwujgt - Bar length : 3200 [mm] - Pushcart diameter : 10.2 [mm] - Channel diameter : 12 [mm] - Supply voltage : 400 [V] - Machine weight : 600 [kg]

Condition: good (used), Year of construction: 2010, Mc Quay rooftop unit for heating and cooling Cooling capacity at outside temp. 35°C and room temperature 27°C 56 kW Heating output at outside temp. 7°C and room temperature 21°C 67kW Dual circuit with scroll compressors Radial fan with external dynamic pressure of 196 Pa Air volume flow 11400 m³/h Refrigerant R 407C The machine is built in a transport frame and can therefore be used immediately and on a mobile basis Cgjlqx Hjphmh Ujwujt No maintenance backlog

Year of construction: 2021, Condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps Celqohrumaox Hwuogt - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 1971, Condition: good (used), 3-roll bending machine - Working length: 2550 mm - Largest sheet thickness: 8 mm (Cr-Ni) 10mm (Steel) - Upper roll diameter: 220 mm Celqx Hwsl Axfzjusgt - Bottom roll diameter: 220 mm - Total length: 5100mm - Total height: 1250mm - 3 shaft stubs to accommodate profile tooling - Rollers are adjustable for conical bending - Machines in fully functional condition. - A frequency converter has been retrofitted to the machine for the infinitely variable speed adjustment of the roller speed. You are welcome to try the machine at our factory! Defects: * Damage to the paintwork all around

Condition: excellent (used), Functionality: fully functional, Edge, disc grinder 2-in-1 SAMCO DG-60 Specifications: - manufacturer - SAMCO - model - DG-60 - working height - 150 mm - paper size - 150 x 1870 mm - worktop with dimensions of 35 x 64 cm - motor power - 2.2 kW - mechanical belt tensioning and oscillation - the machine does not need pneumatics - diameter of the abrasive plate - 600 mm - table top adjustable in angle +- 45 degrees - extraction stubs fi 120 mm - safety switches and CE markings Cgolqx Hwsvgnageuot - weight - approx. 400 kg - overall dimensions 110 x 120 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and shipping costs

Condition: used, Barloader IEMCA ELITE 112/32LL Cgelqx Hsuhbl Hswujt

Year of construction: 2021, Condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop Cgolqx Hehrukijwuet - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: ready for operation (used), Functionality: fully functional, SAMCO Eurouno 3-roller feed Specification: • condition - used • manufacturer - SAMCO • model - Eurouno • 3 pulling rollers with dimensions 120x48 mm • forward/reverse rotation • speed regulation with switch and on gears • motor powered by 380V current (3 phases) • 4 working speeds in the range from 3.0 to 22.0 m/min • weight approx. 70 kg Additional information: • very good, factory technical condition Cgjljvn Tcvsqx Hwuet • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: used, TECHNICAL DETAILS Cgelqxouhbk Nj Hwust - max. bar diameter : 40 [mm] - max. bar length : 4100 [mm]

Condition: used, TECHNICAL DETAILS - bar Ø : 8-80 [mm] Cgelqouhbkvox Hwuet - bar length : 2100 [mm]

Condition: used, TECHNICAL DETAILS - bar Ø : 8-80 [mm] - bar length : 2100 [mm] Cslqxeuhbkpj Hwuogt

Condition: used, TECHNICAL DETAILS - max diameter : 40 [mm] - max bar length : 3800 [mm] - supply tension : 3x 230 [V] - = control tension : 24 [V=] - ~ control tension : 110 [V~] - supply frequency : 60 [Hz] - dimensions : 4.300 x 750 [mm] - height : 1.860 [mm] Colqxsuhbg Ro Hwusgt EQUIPMENT - canal diameter : 14 [mm] - pushcart diameter : 12 [mm] - feet

Condition: used, TECHNICAL DETAILS For CNC lathes with fixed or mobile headstock and for transfer machines. - bar diameter : round, 5 - 65 [mm] Cgslqeuhbg Dex Hwuet hexagonal, 5 - 56 [mm] - max bar length : 6 [m] - magazine capacity (with bundle) : 2500 [kg] - weight : 2700 [kg] EQUIPMENT - pushcart length : 1250 [mm] - pushcart axis height : 1100 [mm] - pushcart diameter : 63 [mm] - canal diameter : 70 [mm]